Tuttnauer EZ9Plus Guide de configuration

Resetting:

“Atmospheric Pressure

Parameter”

on

EZPlus

EZ9Plus & EZ11Plus

“Weekly Cleaning

and Maintenance”

EZ9Plus & EZ11Plus

Instructions on:

Cleaning should be done once per week or after 20 cycles, clean and

descale the chamber, copper tubes and the reservoir using Chamber BriteTM.

Cleaning is an important part of maintaining your sterilizer. Cleaning the

autoclave chamber is a very simple, but important procedure to keep your

sterilizer operating properly. If the autoclave is not cleaned regularly, dirt

and debris will build up and clog the tubing and valves. This dirt can also

be transmitted to the instruments during sterilization. In addition, a layer

of dirt on the stainless steel chamber traps moisture against the metal

and will lead to the chamber becoming porous and failing

Why is cleaning important?

CHAMBER BRITE™ is a cleaning and

descaling agent designed specifically for

the cleaning and removal of water

deposits, oxides and other sediments

that are found in steam sterilizers. The

material is a combination of acidic salts

and additional cleaning materials.

What is Chamber BriteTM?

•Soft cloth or sponge

•Drain hose (to drain water reservoir)

•Pail (to drain reservoir water into)

•Gloves

•Nonabrasive stainless steel cleaner

(for trays and tray rack)

•Steam distilled water

Items you will need to have on hand:

•Chamber Brite™

•For EZ9Plus models use one packet of CHAMBER BRITE™.

•For EZ11Plus models use one packet of CHAMBER BRITE™.

Important things to remember:

•NEVER use bleach, steel wool, a steel brush or anything

abrasive to scrub or clean the Chamber.

•Do NOT sterilize instruments during the chamber cleaning

process.

•Before using Chamber Brite, the autoclave chamber MUST be

cold.

If the chamber is hot, Chamber Brite will react and give

off an odor

.

•All steps in this procedure must be completed without

interruption.

Step 1

When the autoclave chamber is COLD,

remove instruments trays and the tray

holder from the autoclave. (

Starting with

a hot chamber can result in burning of

the Chamber Brite and the release of a

strong odor.)

Step 2

Open the door and spread the

contents of one packet of Chamber

Brite™ in a straight even line along

the bottom of the chamber, from back

to front. Do not leave a pile of

Chamber Brite in one spot.

Step 3

Select the

Chamber Brite

Cleaning

program, Close the

door and start the cycle.

Step 4

At the end of the cycle open the

door and drain the water

from the reservoir.

Step 5

Fill the reservoir with steam

distilled water or mineral free

water only.

Autres manuels pour EZ9Plus

2

Ce manuel convient aux modèles suivants

1

Autres manuels Tuttnauer Équipement de laboratoire

Tuttnauer

Tuttnauer 3840 ELVG-D Manuel utilisateur

Tuttnauer

Tuttnauer 55120 1REP Manuel utilisateur

Tuttnauer

Tuttnauer Valueklave 2540 Manuel

Tuttnauer

Tuttnauer Elara 11 Manuel utilisateur

Tuttnauer

Tuttnauer 2340 M Manuel utilisateur

Tuttnauer

Tuttnauer 2340EA-D Manuel utilisateur

Tuttnauer

Tuttnauer TIVA2 TD Manuel utilisateur

Tuttnauer

Tuttnauer LABSCI 11L CPVG Manuel utilisateur

Tuttnauer

Tuttnauer LABSCI 15L Manuel utilisateur

Tuttnauer

Tuttnauer 2450EK Manuel

Tuttnauer

Tuttnauer EZPlus Autoclave Manuel utilisateur

Tuttnauer

Tuttnauer LABSCI 15LV Manuel utilisateur

Tuttnauer

Tuttnauer 2540 ELV Manuel

Tuttnauer

Tuttnauer E Series Manuel utilisateur

Tuttnauer

Tuttnauer 1730E Manuel

Tuttnauer

Tuttnauer 6690 STS-1V Manuel

Tuttnauer

Tuttnauer Valueklave 2540 Manuel utilisateur

Tuttnauer

Tuttnauer 2540 MKA Manuel

Tuttnauer

Tuttnauer 3870 HSG-D Manuel

Tuttnauer

Tuttnauer Elara11 Manuel utilisateur

Tuttnauer

Tuttnauer 2840 EL-D Manuel

Tuttnauer

Tuttnauer 2840 ELG-D Manuel utilisateur

Tuttnauer

Tuttnauer EZ9 Manuel

Tuttnauer

Tuttnauer T-Edge 10 Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur