TurboTronic TT-BM100 Manuel utilisateur
2
IMPORTANT SAFEGUARDS
Before using the electrical appliance, the following basic precautions
should always be followed:
1. Read all and save these instructions.
2. Before using check that the voltage of wall outlet corresponds to the
one shown on the rating plate.
3. This appliance is not intended for used by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliances by a
person responsible for their safety.
4. Close supervision is necessary when any appliance is used by or
near children. Children should be supervised to ensure that they do
not play with the appliance.
5. Do not touch hot surfaces. Use handles or knobs. Always use oven
mitts to handle hot bread pan or hot bread.
6. Do not put hand inside oven chamber after bread pan is removed.
Heating unit will still be hot.
7. To protect against electric shock do not immerse cord, plugs, or
bread maker in water or other liquid.
8. Unplug from outlet when not in use and cleaning. Allow to cool
3
before putting or taking off parts, or before cleaning the appliance.
9. Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions, or is dropped or damaged in any
manner. Return the appliance to manufacturer or the nearest
authorized service agent for examination, repair or electrical
/mechanical adjustment.
10. The use of accessory attachments not recommended by the
appliance manufacturer may cause injuries.
11. Do not use outdoors and household use only.
12. Do not let cord hang over edge of table or counter or touch hot
surface.
13. Do not place on or near a hot gas or electric burner, or in a heated
oven.
14. Extreme caution must be used when moving an appliance
containing hot oil or other hot liquids.
15. Never switch on the appliance without properly placed bread pan
filled ingredients.
16. Never beat the bread pan on the top or edge to remove the pan, this
may damage the bread pan.
17. To disconnect, turn all controls off(START/STOP); then remove plug
from wall outlet.
4
18. Do not place eyes or face in close proximity with tempered glass
viewing window, in the event that the safety glass breaks.
19. This appliance has been incorporated with a grounded plug. Please
ensure the wall outlet in your house is well earthed.
20. Do not touch any moving or spinning parts of the machine when
baking.
21. Do not operate the appliance for other than intended use.
22. Clean oven interior carefully. Do not scratch or damage heating
element tube.
PARTS AND FEATURES
5
FUNCTION INTRODUCTION
CONTROL PANEL
6
AFTER POWER ON
Plug the bread maker into power supply, a beep will be heard and “3:00”
will be displayed. But the colon between the “3” and “00” don’t flash
constantly. And “1” is the default program. The arrows point to “750g”
and “MEDIUM” as they are default settings.
START/STOP BUTTON
Press the START/STOP button once to start a
program. The indicator will light up, and the colon in the time display
begin to flash and the program will start. Any other button is inactivated
except the START/STOP button after a program has begun.
Press the START/STOP button for 0.5 seconds and shift to pause state,
if no operation in 3 mintues, the program will continue processing unit
the setting program completed.
Press the START/STOP button for 3 seconds to cancel a program, then
a beep will be heard, it means that the program has been switched off.
This feature will help to prevent any unintentional disruption to the
operation of program.
To remove bread, press the START/STOP button to end the baking cycle.
PREPROGRAMMED MENU
7
Press MENU button to select your desired programs. Each time it is
pressed (accompanied by a short beep) the program will vary. Press the
button discontinuously, the corresponding program number will be
cycled to show on the LCD display.
CRUST COLOR
Press COLOR button to select your desired setting: Light, Medium, or
Dark crust . This button is adjustable in programs menu 1-7.
WEIGHT
Press the Weight button to choose your desired gross weight (500g,
750g, 1000g).
This button is adjustable in programs programs: Menu 1-7.
DELAY TIMER(“ or ”)
Use the DELAY TIMER feature to start the bread maker at a later time.
Press” or ”buttons to increase the cycle time shown on the LCD
display. Add up to 15 hours including the delay time and bread making
program.
NOTES:
Set the Delay Time after selecting PROGRAM MENU, WEIGHT, and
8
CRUST COLOR.
Do not use the timer function with recipes that include dairy or other
ingredients, such as eggs, milk, cream, or cheese.
You must decide how long it will be before your bread is ready by
pressing the “ or ”. Please note the delay time should include
the baking time of program. After baking program is complete, the
bread machine will shift to the Keep Warm setting for 1 hour. Before
start making bread, press the program menu and crust color are
select first, then pressing “ or ”to increase or decrease the delay
time at the increment of 10 minutes. The maximum delay is 15 hours.
POWER INTERRUPTION
In the event of a power outage, the process of making bread will continue
automatically within 10 minutes, even without press START/STOP
button. If the interruption time is longer than 15 minutes, the unit will not
continue running and the LCD display will revert back to the default
setting. If the dough has started rising, discard the ingredients in the
bread pan and start over. If the dough has not entered the rising phase
when the power cord is remove from wall outlet. you can press the
START/STOP button to continue the program from the beginning.
WARNING DISPLAY
9
”HHH”-This warning means that the temperature inside of the bread
pan is too high. Press START/STOP button (see below figure1)to
stop the program, unplug the power cord, open the top lid, and let the
machine cool down completely for 10-20minutes before restarting.
”EE0”-This warning means that the temperature sensor is
disconnected. Press START/STOP button (see below figure2) to
stop the program, unplug the power cord. Please check the sensor by
the nearest authorized service agent for examination, repair or electrical
/mechanical adjustment.
Figure 1 Figure 2
KEEP WARM
After baking program is complete, the bread machine will beep 10 times
and shift to Keep Warm setting for 1 hour. It will be displayed “0:00 ”.After
60minutes will shown on the LCD display.
To cancel the Keep Warm process, press the START/STOP button
for 3 seconds.
TIP: Removing bread immediately after baking program is complete will
prevent crust from becoming darker.
10
PROGRAM MENU
1、Basic bread
For white and mixed breads, it mainly consist of basic bread flour.
2、Quick bread
Kneading, rising and baking time is shorter then basic bread but longer than
Ultra-fast bread. The bread interior tissue is denser.
Quick breads are made with baking powder and baking soda that
activated by moisture and heat. For perfect quick breads, it is suggested
that all liquids be placed in the bottom of the bread pan ;dry ingredients
on top, During the initial mixing of quick bread batters, dry ingredients
may collect in the corners of the pan, it may be necessary to help
machine mix to avoid flour clumps. if so, use a rubber spatula.
3、Sweet bread
For breads with additives such as fruit juices, grated coconut, raisins, dry
fruits, chocolate or added sugar. Due to a longer phase of rising the bread
will be light and airy.
4、French bread
For light breads made from fine flour. Normally the bread is fluffy and has a
crispy crust. This is not suitable for baking recipes requiring butter,
margarine or milk.
Table des matières
