TULPAR A Series Manuel utilisateur
USER MANUAL
KULLANIM KILAVUZU
MANUAL DE USUARIO
MANUEL DE L’UTILISATEUR
MANUALE UTENTE
BENUTZERHANDBUCH
A7 V14.3
01
EN
USER MANUAL
TABLE OF CONTENT
CHAPTER 1 - Preface........................................................................02
1.1 Regulations Information.......................................................................02
FCC Information............................................................................................03
RF Exposure Information(SAR).................................................................04
1.2 Safety Information................................................................................ 05
1.3 Conventions For This Manual..............................................................06
CHAPTER 2 - Getting To Know The Basics .......................................06
2.1 Product Specifcation .............................................................................06
2.2 Preparing your Computer....................................................................08
2.3 Product Overview..................................................................................09
CHAPTER 3 - Getting Started........................................................... 16
3.1 AC Adapter................................................................................................16
3.2 Knowing The Keyboard ........................................................................ 17
3.2.1 For Keyboard Users............................................................................. 17
3.3 Using the touchpad / clickpad.............................................................19
CHAPTER 4 - Bios Setup ..................................................................20
4.1 About Bios Setup ................................................................................... 20
4.1.1 When To Use Bios Setup?..................................................................20
4.1.2 How to Run BIOS Setup ?..................................................................20
4.2 BIOS Setup Menu...................................................................................21
4.2.1 Main Menu............................................................................................ 21
4.2.2 Advanced Menu................................................................................. 22
4.2.3 Security Menu .....................................................................................23
4.2.4 Boot Menu........................................................................................... 24
4.2.5 Exit Menu............................................................................................. 25
A7 V14.3
02
EN
The information in this user’s manual is protected by copyright laws, all parts of this manual,
including the products and software described in it, can not be
reproduced, transmitted, transcribed, stored in a retrieval system, nor
translated into any language.
THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE FOR ERRORS OR OMISSIONS
CONTAINED IN THIS MANUAL AND SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES,
WHICH MAY RESULT FROM THE PERFORMANCE OR USE OF THIS MANUAL.
The illustrations in this user’s manual are for reference only. Actual product specifcations may
vary with territories. The information in this user’s manual is subject to change without notice.
CHAPTER 1
1.1 Regulations Information
NOTICE
Preface
•CE compliance
This device is classed as a technical information equipment (ITE) in class B
and is intended for use in living room and ofce. The CE-mark approves the
conformity by the EU-guidelines:
- EMC Directive 2014/30/EU,
- Low Voltage Directive 2014/35/EU(equals A2 : 2013),
- RF Directive 2014/53/EU
SAR/DAS refers to the rate at which the body absorbs RF energy. The SAR limit set by the
ICNIRP Guidelines is 2.0 W/kg(10g). Testing for SAR is conducted using standard operating
positions accepted by the EN standard. During testing, the radio is set to its highest transmis-
sion levels and placed in positions that simulate use against the body.
This product is compliant with ICNIRP Guidelines with respect to Electromagnetic Fields (EMF)
which specifies a Specific Absorption Rate (SAR) limit of 2W/kg. DAS*/SAR: 0.014 W/kg
(corps/body).
03
Rechargeable Battery Notice
Do not
1. Throw into fire or a hot oven, or mechanically crush or cutting of a BATTERY
2.Throw or immerse into water
3.Heat to more than 60°C
4.Repaire or disassemble
5.Leave in an extremely low air pressure environment
6.Leave in an extremely high-temperature environment
A power cord is connected to a socket-outlet with earthing connection.
The unit can be operated at an ambient temperature of max. 35°C (95°F). Do not subject it to
temperatures below 5°C (41°F) or above 40°C (104 °F).
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
PREVENTION OF HEARING LOSS
CAUTION: Listening to music at high volume levels and for extended durations can damage
one’s hearing. In order to reduce the risk of damage to hearing, one should lower the
volume to a safe, comfortable level, and reduce the amount of time listening at high levels.
Headsets should comply with EN 50332-2 requirements.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
04
EN
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are
conducted using standard operating positions accepted by the FCC with the EUT
transmitting at the specified power level in different channels.
The FCC has granted an Equipment Authorization for this device with all reported
SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR
information on this device is on file with the FCC and can be found under the
Display Grant section of www.fcc.gov/eot/ea/fccid after searching on
FCC ID: 2AKHFAX201NG .
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved
by the grantee of this device could void the user’s authority to
operate the equipment.
CAUTION:
RF Exposure Information(SAR)
05
1.2 Safety Information
Do not apply heavy pressure to the computer or subject
it to any form of strong impact as this can damage
the computer’s components or otherwise cause it to
malfunction.
1
Never cover or block the air vents including those
located at the base of the computer. Never cover your
computer or AC adaptor with any object.
2
Do NOT expose to or use near liquid, rain, or moisture.
Do NOT use the modem during electrical storms.
4
Do not use or expose this device around
magnetic felds as magnetic interference may
aect the performance of the device.
5
To keep your computer in prime operating condition,
protect your work area from direct sunlight.
3
06
EN
1.3 Conventions For This Manual
2.1 Product Specification
This message contains important information that must
be followed for safe operation.
CAUTION:
NOTE: This message contains information for special situations.
CHAPTER 2
Getting To Know The Basics
This User’s Manual provides technical information of instructions and illustrations on how to
operate this notebook for the customer. Please read this manual carefully before using this
notebook.
Physical Characteristic
Processor - CPU
Graphic Card - GPU
I/O Port
Dimension 392.9*260* 24.9mm
Support Processor i7-12700H
Graphic Card 4 GB RTX 3050 Ti
Weight 2.55kg +/- 5%
DDR4 DDR4 3200MHz
LCD 17.3” 1920x1080,IPS/45% 144Hz
Memory
Display
DC-in x 1
USB x 2: USB 3.1 (Gen1)
x 1: USB 3.1 (Gen2)
x 1: USB 3.1 (Gen2) + DP1.4
07
MODEL IS DESIGNED TO USE WITH THE
DC INPUT: 150 Watts (19V/7.89A) or (20V/7.5A), 3 Pins
CAUTION:
Audio
Input
Power
Webcam
Communication Port
Audio Codec Codec: CX11800
*Azalia standard support, *D3 mode support, *Smart AMP support
Speaker/Mıc Build-in 2 speakers
*Speaker : 2W/each
*Digitial Microphone support
Keyboard Single Zone
Pointing Device TDB5297, Outline: 154*100* 0.6 mm, AA: 150*94.6 mm, Mylar,
Enable/Disable area :10mmx10mm, Palm Rejection:Support,
Controller change to PCT3854, support Windows update
AC Adapter Automatics Voltage adjustment between 100 and 240VAC 50/60Hz
150 Watts (19V/7.89A) or (20V/7.5A), 3 Pins
Battery Li- polymer Battery, SW Gas Gauge IC, soft pack
3 cells (3s1p 4100mAh)46.74Wh
Webcam HD webcam with D-MIC*1 ,4mm
LAN *Supports 10/100/1000/2500 Mb/sec
*PCI-E interface
*Power Down Mode D1~D3 support
*PCIe ASPM L1.1, L1.2 support
*UI for network package management
Wireless LAN + BT INTEL AX201
I/O Port
RJ45 x 1
HDMI 2.1 x 1
Audio out & Mic in x 2
Card reader x 1 USB3.0 interface, SD/SDHC/SDXC, UHS-I speed
Connecter: Full SD size
08
EN
2.2 Preparing your Computer
AConnect the AC adaptor’s DC output plug to the DC IN jack.
BThe display panel can be opened to a wide range of angles for optimalviewing.
CPress the power button to turn on your notebook computer.
09
2.3 Product Overview
Please become familiar with each component before you operate the computer.
Top-Open View
The product’s color, I/O port, indicator location, and specifcation will depend
upon the actually shipping product.
NOTE
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels TULPAR Ordinateur portable
