Using your Speed Tracker
Your Speed Tracker is a Time/Distance/Speed calculator, input the measured
distance, time the event and the average speed over the distance for the given
time will be calculated. The result is then given in either, MPH, KPH or m/s.
For example,
To set the number 1500, Press and hold the round button, press round button
again to select next digit, press up x 1, press circle button, press up x 5, press
circle button x 3. At this point none of the digits will be flashing.
Timing an Event
Once the distance is set, press the start/stop/reset button to begin timing, once
the event is finished press the start/stop/reset button again. The amount of time
elapsed will be shown and the average speed will be displayed. Press the start/
stop/reset button to reset the stopwatch to zero.
Setting the Distance
Press and hold the round button. The
first digit on the distance setting will
begin to flash. To select another digit
press the button again to advance the
digit selected. To change the number,
press the ‘up button’ to increase
the digit. When the value reaches 9
pressing the ‘up button’ again will
reset the digit to 0. Once the desired
number is set press the round button
again to select the next digit. Continue
until desired number is set.