1800 816 277www.tti.com.au
8
Product HandBook
DieselCaptain™
Operating Instructions
Before first use
Your DieselCaptain is delivered fully assembled. Once unpacked and before use, it needs to be setup following
the instructions below:
1. Complete the warranty registration online at www.tti.com.au/warranty-registration, or use the Warranty
Registration Card at the back of this handbook.
2. Store this handbook, along with the Tank Quality Check Form, in a safe and easily accessible place for
future reference.
NOTE! The operator must fully understand all aspects of this handbook. Do
not operate the DieselCaptain if you are unfamiliar with its operation until
you have read this handbook.
3. Read and thoroughly understand this handbook, paying particular attention to all safety requirements,
before using the DieselCaptain for the first time.
4. Check that all fittings, hoses, tank breather and electrical leads are secure following transit, and are not
damaged in any way.
5. Inspect the tank for any damage or abrasions that may occur during transit.
CAUTION! The unit must be securely mounted to the vehicle. Failure to do
so may result in the unit moving or falling off the moving vehicle. Warranty
is conditional on the unit being correctly mounted.
6. Position your DieselCaptain onto the vehicle and mount securely using tie-down straps located into the
tie-down recesses on both sides of the tank, refer to Error! Reference source not found. The tie-down
straps must be rated to at least the total mass of the unit when filled with diesel. A recommended frame
design for mounting the DieselCaptain is shown at Figure 1, available as an option from TTi.
1800 816 277www.tti.com.au
7
Product HandBook
DieselCaptain™
Operating Instructions
Before first use
Your DieselCaptain is delivered fully assembled. Once unpacked and before use, it needs to be setup
following the instructions below:
1. Complete the warranty registration online at www.tti.com.au/warranty-registration, or use the Warranty
Registration Card at the back of this handbook.
2. Store this handbook, along with the Tank Quality Check Form, in a safe and easily accessible place for
future reference.
NOTE! The operator must fully understand all aspects of this handbook. Do
not operate the DieselCaptain if you are unfamiliar with its operation until
you have read this handbook.
3. Read and thoroughly understand this handbook, paying particular attention to all safety requirements,
before using the DieselCaptain for the first time.
4. Check that all fittings, hoses, tank breather and electrical leads are secure following transit, and are not
damaged in any way.
5. Inspect the tank for any damage or abrasions that may occur during transit.
CAUTION! The unit must be securely mounted to the vehicle. Failure to do
so may result in the unit moving or falling off the moving vehicle. Warranty
is conditional on the unit being correctly mounted.
6. Position your DieselCaptain onto the vehicle and mount securely using tie-down straps located into the
tie-down recesses on both sides of the tank, refer to Error! Reference source not found. The tie-down
straps must be rated to at least the total mass of the unit when filled with diesel. A recommended frame
design for mounting the DieselCaptain is shown at Figure 1, available as an option from TTi.
Figure 1 – Recommended Mounting Frame Design
Figure 1 – Recommended Mounting Frame Design
