TSindustrie GS/PREMIUM22P Manuel utilisateur

TECHNICAL MANUAL

PREMIUM22P2014-10-08 3

INTRODUCTION__________________________________________

SERIAL NUMBER’S EMPLACEMENT ______________________________________

SAFETY __________________________________________________

GENERAL SECURITY ____________________________________________________

SECURITY OF USE _______________________________________________________

MAINTENANCE SECURITY _______________________________________________

SECURITY OF TRANSPORT ______________________________________________

GENERAL DESCRIPTION AND FUNCTIONS _________________

OPERATING OF FEEDER CONTROLS _____________________________________

PUTTING IN OPERATION __________________________________

CHECK BEFORE STARTING ______________________________________________

PUTTING IN SERVICE ___________________________________________________

STOPPING ______________________________________________________________

MAINTENANCE AND SERVICING __________________________

LUBRICANTS ____________________________________________________________

MAINTENANCE PERIODICITIES __________________________________________

LUBRICATION POINTS __________________________________________________

OIL LEVELS _____________________________________________________________

FEEDER’S PRESSURE ON THE MATTER __________________________________

DISASSEMBLY FOR REPLACEMENT OF KNIVES

AND OF HAMMER PELLETS _________________________________________

DISASSEMBLY TO CHECK THE COUNTER BLADE _________________________

ADJUSTMENT OF THE ROTOR’S BELTS __________________________________

HYDRAULIC COUPLER MAINTENANCE __________________________________

BRAKE SETTINGS _______________________________________________________

DESCRIPTION AND HANDLING ____________________________

ENGINE AND CONTROL PANEL DESCRIPTION ____________________________

THE RESERVOIRS _______________________________________________________

HOOD SECURITY PREMIUM DRI__________________________________________

MAINTENANCE/ OPERATING CONTACTOR_______________________________

ANTI JAMMING SYSTEM ________________________________________________

EMERGENCY STOP BUTTONS ____________________________________________

HYDRAULIC COUPLER __________________________________________________

ANTI-OBSTRUCTION SYSTEM "VarioStress": Description_______________

ANTI-OBSTRUCTION SYSTEM: Programs __________________________________

INVENTION PATENT ___________________________________ 6

TABLE OF CONTENTS

7-8

12-13

17-19

26-27

30-31

44-45

PREMIUM22P2014-10-08 5

TROUBLESHOOTING _____________________________________

SPECIFICATIONS_________________________________________

NO STRESS ELECTRIC CIRCUIT AND EMERGENCY STOPS PETROL ______

NO STRESS ELECTRIC CIRCUITS AND EMERGENCY STOPS DIESEL ______

HYDRAULIC DIAGRAM ___________________________________

HYDRAULIC HOSES IDENTIFICATION _____________________

DECLARATION OF CONFORMITY PREMIUM ER________

DECLARATION OF CONFORMITY PREMIUM DRI_______

46-47

TABLE OF CONTENTS

PREMIUM22P2014-10-08 6

PATENT FOR INVENTION

Intellectual property law-Books VI

GRANTING DECISION

The General Manager of the National Institute of industrial property has decided

that invention patent # ##-##### the text of which is appended shall be delivered to:

SAELEN S.N.S. Company - FR

The delivery produces its effects for a period of twenty years starting on the date

of deposit of the application, under reserve of payment of the annual royalties.

Mention of the delivery is made in the Official Bulletin of industrial property ###/## of

##:##:## (publication # # ### ###).

PREMIUM22P2014-10-08 7

INTRODUCTION

Thank you for your purchase and your confidence in us.

It is important to read what follows in order for you to fully benefit from your purchase.

Although this machine is simple and easy to use, we recommend reading this manual be-

fore starting to use it.

In order to operate your multi-vegetation chipper in a safe, efficient and effortless manner,

you need to be familiar with the instructions for operation, maintenance and problem-

solving that are described in this manual.

This manual describes all the functions of the PREMIUM chipper. Keep it within reach for

later reference. Please contact your reseller for more information, technical data or if you

want to order an additional copy of this manual.

Safety precautions:

This machine is only suitable for chipping vegetable waste. It may not be operated by

persons younger than 16.

The machine should only be used by persons who have a good physical condition and a

certain technical knowledge.

Maintenance must be done by a qualified technician. All interventions for assembly, dis-

assembly and/or specific maintenance must be handled by a recognized distributor. Before

working on the PREMIUM for maintenance or other purposes, please remove the ignition

key.

Position of the operator: left, right, in front of and behind in this manual are as

seen by the operator from his work station, facing the hopper.

Left R

Right

F Front

B Behind

PREMIUM22P2014-10-08 8

Safety instructions

This machine is only intended for crushing and shredding plants.

Besides shredding wood and plants, the PREMIUM shredder cannot be

used for any other purpose.

The shredder should only be used by people over 16 years of age.

This machine can only be used by someone who is in good physical condition and who

has some technical knowledge.

Maintenance and repair work should be done by a qualified technician. Assembling,

disassembling and/or specific maintenance work should be performed by an authorized

dealer.

Before beginning work or proceeding to maintenance of the PREMIUM, always remove

the ignition key.

Proceed to maintenance by scrupulously following the instructions.

Eliminate pieces of metal, plastic, rubber or any other materials that may have been mixed

with the wastes.

Always use protection goggles, work gloves and protection against noise;

The machine can in no case be used to transport equipment, material or people.

The machine cannot be used to push or pull anything.

Battery acid is very corrosive. Avoid any contact with the eyes, skin and garments.

Immediately rinse eventual splashes with water and if the case arises, consult a doctor.

Before touching the electric circuit, always disconnect the cable connected to the battery’s +

terminal.

Always keep the battery out of reach of children.

When performing maintenance, do it in a sufficiently lit workshop.

Respect the safety standards prescribed in the motor’s user and maintenance manual.

Keep children away while the machine is in operation or when performing maintenance

work; Do not work in confined space. Do not run the motor in a non ventilated place (risk of

CO² intoxication)

INTRODUCTION

PREMIUM22P2014-10-08 9

When you order spare parts or if you need technical information, please always have the

serial number of your PREMIUM shredder.

The manufacturer’s nameplate is located on the chassis at the front left.

Serial number

The serial number is located at the place

indicated on the photo, it is always com-

posed of five figures sometimes followed

by a letter.

LOCATION OF THE

SERIAL NUMBER

PREMIUM22P2014-10-08 10

The TS Industrie Company guarantees the parts of its PREMIUM shredders against any

defect that could affect their operating. The guarantee applies in all the cases where the

damage is not the result of improper use, abuse or negligence, accidental, act of God or any

other circumstance beyond the control of TS Industrie. This guarantee extends over a

period of one year starting on the date of delivery to the customer and is limited to the

replacement of defective parts and/or of labour.

GUARANTEE CLAIM

A claim in due form shall be presented to TS Industrie, by the origin purchaser for

inspection by an authorized representative of the company.

LIMITS OF LIABILITY

This guarantee replaces all other formal or implicit guarantees as well as any alleged

obligations or responsibilities. We do not assume nor authorize third parties to take

responsibility for the sale of a plant shredder.

This guarantee does not apply to a shredder that has been modified out of our

workshops and that, according to TS Industrie standards, would be affected in its

operation, its safety and its service life.

This guarantee does not cover parts and accessories that are already under their

manufacturer’s guarantee and the servicing of which is covered by the latter’s

administration. Service items such as lubricants, belts, paint and similar are not subject to

guarantee.

USER MANUAL

The purchaser acknowledges having received instructions concerning the correct operation

of the shredder and also acknowledges that TS Industrie cannot assume any responsibility

resulting from the use of his product other than that described in the user manual supplied at

the time of the purchase.

DO NOT FORGET TO REGISTER YOUR GUARANTEE

OTHERWISE IT WILL BECOME INVALID.

GUARANTEE

Table des matières

Autres manuels TSindustrie destructeur de papier

TSindustrie

TSindustrie GM10 Manuel utilisateur

Manuels destructeur de papier populaires d'autres marques

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Mode d’emploi

GBC

GBC ShredMaster CC055 Manuel utilisateur

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuel utilisateur

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuel utilisateur

Rexel

Rexel Optimum AutoFeed+ 45X Manuel utilisateur

Martin Yale

Martin Yale 227284S1 Manuel utilisateur

Bonsaii

Bonsaii DocShred C223-A Manuel utilisateur

HSM

HSM Pure 740 max Manuel utilisateur

TRU RED

TRU RED TR-BMC20A Manuel utilisateur

Fellowes

Fellowes 50S Manuel utilisateur

GBC

GBC SHREDMASTER 1236SE Manuel utilisateur

Gude

Gude GH 2600 P Manuel utilisateur

Ativa

Ativa DQ80M Manuel utilisateur

Q-Connect

Q-Connect Q8CC Manuel utilisateur

Fellowes

Fellowes POWERSHRED C-325CI Manuel utilisateur

Olivetti

Olivetti Privacy 5000C Guide de démarrage rapide

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuel utilisateur

Dahle

Dahle paperSAFE 22022 Manuel utilisateur