tryten Nova Line Manuel utilisateur
Nova Assembly Instructions – Rev G Page 1
Nova Mobile Carts 1-800-860-4455
Tryten Nova Line
Assembly Instructions
For further instructions please visit Tryten.com/instructions, for
additional questions or technical support contact us at
Tryten.com/contacts or 1-800-860-4455.
Nova Assembly Instructions – Rev G Page 2
Assembly Instructions Page
Receiving the Shipping Box 3-4
Assembling Base to Pole 5
Universal Omnitab Adjustment 6-9
Removing Channel Strips 10
Nova Go Universal Omnitab Installation 10
Power Box and Cabling Installation 11
Extension Pole installation, Neo and Connect 12
Work Surface Installation 13-15
Keyboard Tray Installation 16
Supply Caddy and Transducer Holder Installation 17
Supply Caddy Lockable Lid 18-19
Nova Connect and Tall Vesa bracket and Monitor
Installation
20-21
Nova Neo Vertical Tablet Arm Installation 22
Nova Go and Pro Vesa Plate Installation 22
Nova Connect and Tall Camera Bracket Installation 23-24
Logitech Bracket and Camera Installation 25-26
Speaker Bracket and Speaker Installation 27-29
Intel NUC Bracket and Unit Installation 30
Nova Assembly Instructions – Rev G Page 3
NOVA HARDWARE PACK
•Felt Pads - ¾” x 1/8” thick (6)
•Label Hardware Kit Nova (1)
•Hex L-Key - 3/16” size, 3” length (1)
•Torx Security L-Key - T25, 2-11/16” long (1)
•Hex L-Key - 5/32” size, 2-11/16” length (1)
•Keys Set Tablet Cart Nova (1)
•Screw 10-24 x 3/4" Security Torx, Button head, SS (1)
•Screw 1/4-20 by 1" Socket Head, Zinc (4)
•Belleville (dome) Washer 1/4" 18-8 SS (4)
ASSEMBLY INSTRUCTIONS
Note: Shipping box pictures show Nova Pro Tablet Cart for
assembly reference. Alternative configurations vary but the
installation process is similar.
1. OPEN THE SHIPPING BOX
•Base
Nova Assembly Instructions – Rev G Page 4
Extract the Hardware pack.
•Remove Pole Assembly from packaging.
Nova Assembly Instructions – Rev G Page 5
2. ASSEMBLE THE POLE
•Assemble the Pole to the base with the four (4) screws and
dome washers using the 3/16” Hex L-Key from the
Hardware Pack.
Nova Assembly Instructions – Rev G Page 6
3. (A) ADJUST OMNITAB UNIVERSAL BRACKET TO FIT
TABLET
The Universal bracket comes adjusted to fit the standard iPad 9.7
•Unlock the Top Slider using the set of keys from the
Hardware Pack. Remove the Top Slider from the Universal
Bracket.
•Loosen the three (3) screws using the 1/8” Hex L-Key from
the front of the cover.
•Pull the sliders to the appropriate size tablet
•Tighten the 3 adjustment screws
•Insert tablet by sliding in from the top.
•Insert the Top Slider until it locks in the tablet and push
the locking button.
Nova Assembly Instructions – Rev G Page 7
3. (B) INSTALLING 2ND SET OF SLIDERS WHEN TABLET IN
CASE
•Remove the 4 Felt Pads from the Universal Bracket.
•Remove the 4 Screws holding the cover of the Universal
Bracket using the 1/8-inch Hex L-Key from the front of the
cover.
Nova Assembly Instructions – Rev G Page 8
•Remove cover and the 3 screws holding the sliders using
the 1/8-inch Hex L-Key from the front of the cover.
•Remove the 4 sliders and replace with the set of sliders
from Hardware Pack.
•Install the 3 Screws holding the sliders using the 1/8-inch
Hex L-key from the front of the cover.
Nova Assembly Instructions – Rev G Page 9
•Put back the cover and install the four (4) screws removed
at step b) using the 1/8” Hex L-Key from the front of the
cover.
•Apply the set of felt pads supplied in the hardware pack on
top of the screws.
•Adjust sliders and install tablet following the instructions
from Step 3A
Nova Assembly Instructions – Rev G Page 10
•Insert one of the smaller Allen Keys in behind the top of
the channel cover to pull out of the pole. Reinstall covers
after the power cords are in place.
Note: Channel Cover Strips will need to be adjusted if
accessories are installed.
5. NOVA GO HEAD INSTALLATION
•Extract the Nova Go head from packaging box and the Torx
Security Button Head Screw from the Hardware Pack.
•Assemble the Nova Go head as shown using the Torx
Security L-Key provided in the Hardware Pack.
•Tighten the screw until it is fully engaged.
4. REMOVE THE CHANNEL STRIPS
Autres manuels pour Nova Line
1
Table des matières
Autres manuels tryten Équipement médical
