TRYBIKE STEEL Manuel utilisateur

HAVEFUN WITHTHETRYBIKE!

Thank you for buying an original Trybike!

We wish your child lots of fun and

adventure with the new bike.

The Trybike can be used by children from

around two years old. If you purchased the

trike kit opon, the Trybike can be used as

a tricycle from the age of about 15 months.

The Trybike is perhaps the best and most

enjoyable toy you can give a child. While

using the Trybike children will develop their

walking, riding and balancing skills. These

are skills they need in later life, like to ride

a pedal bike.

With the unique footrest children learn to

balance even beer and, consequently,

learning to ride a pedal bike without

training wheels will be peanuts. Have fun!

USERINSTRUCTIONS

Two brothers who are crazy about cycling.

We come from the Netherlands, where

almost everyone has one or two bikes.

We are enthusiasc cyclists, and we have

been imporng loads of fun toys, especially

ones with wheels – including balance bikes

– for more than 10 years by now. In 2014,

we started developing our own balance

bike, applying all of our knowledge as toy

sellers and enthusiasc cyclists during the

process. We had great fun designing the

perfect balance bike: durable, strong, and,

to top it all, darned good-looking to boot!

The result: the Trybike, which is exactly the

kind of bike we would have loved to have

had as kids!

WEARE

PIMANDALEX

OF CO & CO

WATCHTHEASSEMBLY

INSTRUCTIONSBYSCANNING

THEQR-CODE

ENJOYYOURTRYBIKEANDLET US KNOW

WHATYOUTHINK

Co&Co BV is the exclusive trademark holder of the gurave trademark TRYBIKE. The TRYBIKE

is protected by intellectual property rights. Co&Co BV reserves all rights.

TRYBIKE.NL

TRYBIKE.NL/MANUAL

TRYBIKE TRYBIKE

CO & CO BV, KONING LODEWIJKLAAN 40C, 7314 GG APELDOORN, THE NETHERLANDS

+31 55 522 28 63, WWW.COANDCO.NL, INFO@COANDCO.NL

WARNING!

• Adult assembly only!

• Read all assembly instrucons, warnings

and maintenance instrucons before

you start.

• If you do not read/follow these

instrucons carefully, the Trybike could

be assembled incorrectly and/or it

may get damaged, which might lead to

serious injury during use.

• Remove all bags, packaging materials

and protecve materials before allowing

a child to use the bike.

• The Trybike is not suitable for children

weighing more than 35 kg/77lbs

• Make sure your child wears proper

protecve gear when riding the Trybike.

Use an approved safety helmet and

closed-toe shoes. It is also a good idea

to wear gloves as well as elbow and

kneepads, long trousers and outer

garments with long sleeves.

• A child should always be under adult

supervision when riding the Trybike.

• Always let your child ride in front of you,

not behind you.

• Regularly check that all parts are secure

and undamaged, paying parcular

aenon to the handlebars, wheels and

seat. Make sure you perform a thorough

check-up 14 days aer assembly.

• If the Trybike is in some way damaged,

do not use it again unl it has been

repaired by an authorised Trybike dealer.

• No more than ONE child on the Trybike

at a me!

• Before your child gets on the bike,

explain how the Trybike should be

stopped by using your feet.

• Never allow children to use the Trybike

on public roads, in areas where there

are cars, on slopes, on stairs, on or near

bridges or near water (e.g. swimming

pools, rivers, ponds, ditches, canals) or in

other places that could be dangerous.

• Do not use Trybike in the dark or at dusk.

• Keep these instrucons and safety

precauons in a safe place for

future reference.

• Co&Co cannot be held liable for injuries

or accidents caused by the use of a

Trybike. The buyer accepts the risks

involved in the use of the Trybike.

TRYBIKE FOLLOWYOURFEET

WHATIS IN THE BOX?

• Frame with front forks aached to it.

• 2 wheels

• 2 short wheel axles with 2 long nylon

black bushings, rings and 2 cap nuts

• Handlebar with stem

• Safety pad

• 2 handlebar grips

• Scker set

• Tool set (1 x Allen key and 2 x open end

wrench)

• User instrucons

FITTING THEFRONTANDREAR

WHEELS INTOTHEFORKS

The front and rear wheels are idencal and

need to be mounted in the same way.

Insert the black bushings into the wheel,

with the narrow part of the bushing ng

into the bearing of the wheel. Posion

the wheel with the black nylon bushings

between the front forks so that the holes

of the front forks are exactly aligned with

the holes of the bushings. Insert the axle

through the front forks, the bushings and

therefore also through the wheel. Before

you push the axle all the way through, put

the nut on one side of the axle, giving it a

few turns. Push the axle enrely through the

hole and t a nut on the other side, again

giving it a few turns. Once ed, ghten the

nuts on both sides simultaneously and check

whether the wheel rotates smoothly.

TRYBIKE DISCOVERTHEWORLD

ASSEMBLINGTHETRYBIKE

We have already parally assembled the Trybike. We would love to put the enre bike

together for you beforehand, but then we would have to ship it in a large box. This would

make transportaon very expensive, it would be bad for the environment and no fun for

the poor postman.

UNIQUEADJUSTABLE WHEEL POSITION,HEIGHT AND LENGTH

The Trybike has a unique system for adjusng the bike to your child’s skills and size. For

each stage of your child’s development it oers a perfect wheel posion.

FRONTWHEELHEIGHT

The front fork has 2 opons for posioning the wheel. Hole

1 makes the bike lower. If your child is small or starng

with the tricycle opon, this is the best posion. If your

child is taller, the wheel can be in hole 2. This will put the

Trybike in the highest posion.

HEIGHT ANDPOSITIONREARWHEEL

The rear fork has 9 opons for posioning the rear wheel.

This feature allows you to shorten, extend, lower or raise

the wheelbase.

Hole 1 puts the bike in the lowest posion, hole 5 in the

highest posion, hole 3 provides the longest wheelbase

and is ideal for the tricycle posion and hole 7 provides

the shortest wheelbase, making the Trybike even more

manoeuvrable.

For use as a tricycle:

• Starter: Front, use hole 1. Rear, use hole 1.

(the lowest posion)

• Advanced: Front, use hole 1. Rear, use hole 3.

(this gives more room for the feet relave to the long axle)

For use as a two-wheeler:

• Starter: Front, use hole 1. Rear, use hole 1 or 9.

(depending on child size)

• Advanced: Front, use hole 1. Rear, use hole 9.

(regular distance between wheels)

• Very skilful: Front, use hole 1. Rear, use hole 7.

(shorter distance between wheels and as a result

more manoeuvrable)

• Advanced and large: Front, use hole 2. Rear, use hole 5.

(extra high posion)

TRYBIKE LIGHTNINGFAST

HOLE1

Low posion

HOLE2

High posion

Posion of holes +

numbers

ASSEMBLYOFTHELONG REARAXLEAND THETWO REAR WHEELS

(TRIKE KIT ONLY)

Insert the short aluminium pipe in between the rear forks. Insert

the short black bushings into the wheels, with the narrow part

of the bushings into the wheel bearings. Then slide one wheel

with the bushings over the rear axle up to the xed nut at the

end of the axle. Push the long aluminium pipe over the axle up

to the wheel and slide the axle, from the le side of the rider,

into the holes of the rear forks and through the aluminium pipe.

Important, keep the sealed nut on the le side of the rider. This

way the nut on the other side won’t turn loose when the Trybike

is ridden. Slide the remaining long aluminium pipe and the wheel

with the bushings onto the right side of the rear axle and fasten

the wheel with the nut. Finally, ghten the nut properly and

check that the wheels rotate smoothly and the nuts don’t turn.

HANDLEBAR

CORRECTHANDLEBARHEIGHTFORSTARTINGRIDERS

For a starng rider, the best handlebar height is at more or less halfway the torso when

your child is sing on the seat and the feet are at on the ground. Your child must easily

be able to hold the handlebar with slightly bent arms. Most important is that your child

has a good overall view, like you have on a city bike for adults. The handlebar should not

be too low because your child will be too far ahead and will then not have a good overall

view.

CORRECTHANDLEBARHEIGHTFOREXPERIENCEDRIDERS

Children who have used the Trybike for a while and those

who are very skilled and a bit adventurous with the bike can

have their handlebar installed lower than the seat. Actually,

this is similar to a mountain bike or race bike. In reality, it

means that you will have to adjust the seat height regularly

(upwards) but the handlebar rarely or not.

FITTINGTHEHANDLEBARINTOTHE FRONT FORK

Remove the black plasc protecve cover from the

handlebar boom. Slide the handlebar into the front fork,

making sure that the handlebar and the slanted clamp bolt

form a unity (see picture). Posion the handlebar to the

correct height for your child and use the socket bolt at the

top of the handlebar to ghten it. When the handlebar is

rmly ghtened, place the safety pad.

TRYBIKE WALKINGTHEWORLD

ADJUSTINGTHESEAT

Unlock the seat clamp quick release by pulling the lever

towards you (see picture). Determine the seat height and push

back the

lever of the quick release. If the seat pen is sll a bit

loose when the quick release is closed, adjust it as follows:

unlock the quick release, turn the round “nut” opposite the

lever clockwise and close the quick release. If the seat pen

is sll loose, turn the round “nut” even ghter.

CORRECTSEATHEIGHT

The seat will be at the correct height when your child can just reach the oor with the heels.

If the seat is too low in tricycle mode, the heels tend to touch the back axle, and in bicycle

mode, the child’s feet will end up dragging slightly. So ensure the seat is not too low.

STICKERS

The Trybike comes with a set of sckers. You can choose which sckers you like best and

sck those on the Trybike. Place the small oval Trybike logo scker at the front of the bike

just above the front fork. The Trybike name sckers go on the sides of the frame.

TRYBIKE THEGROWBIKE

SAFETY PAD

The safety pad serves as

an extra protecon feature

and for decoraon. Posion

the safety pad as shown

in picture 1, the logo must

be on the outside of the

handlebar. Fold down

the long ap over the

handlebar (see picture 2).

Then fold the le side over

the long ap (see picture 3),

the so part of the velcro

on the front. Close the

safety pad by aaching the

hard part of the Velcro to

the so Velcro strap (see

picture 4).

MAINTENANCE

Regularly check that all parts are secure

and undamaged, paying parcular

aenon to the handlebars, wheels and

seat. Make sure you perform a thorough

check-up 14 days aer assembly.

TYRES

We recommend that you inate all the

tyres to approximately 30 psi to 35 psi (2.0

to 2.4 bar). You should sll be able to push

in the tyre a lile with your thumb. Do not

overinate the tyres. Do not exceed 35 psi,

because the tyre may burst!

Regularly check the tyres and wheels for

damage and correct tyre pressure.

CLEANING

To clean the Trybike, use car wash

detergents, lukewarm water and a so

cloth.

LUBRICATION

Lubricate the axles, the ball head and

the bearings of the wheels lightly with

standard bicycle oil.

STORAGE

Store the Trybike in a warm, dry and well-

venlated area. Do not keep it outside or in

a cold damp storage area.

WARRANTY

Designing our bikes took a lot of me, and

each Trybike has been manufactured with

great care and aenon. Every Trybike

is checked separately, but producon

errors may sll slip through. That’s why

the Trybike comes with a 2-year warranty

period from date of purchase against any

manufacturing defects. We will repair or

replace the Trybike free of charge during

this period if you should encounter any

manufacturing defects. If you have any

problems with your Trybike, please contact

the (online) store where you purchased

your Trybike.

This warranty is valid only for the original

purchaser who bought the product new

from an authorised dealer, so make sure

you keep a copy of your receipt.

Your warranty will be likely to become

void if you have modied the Trybike in

any way, if the problem is due to normal

wear and tear, if you bought the Trybike in

a used condion or if the Trybike has not

been correctly used and/or maintained.

Please contact us if you have any problem

with your Trybike, because we can always

help you, even if your warranty is no longer

valid. We designed the Trybike so that it

can always be xed. All components are

available and can be ordered separately.

We will do everything we can to ensure

that children may enjoy the Trybike for

as long as possible. Rights may vary by

country.

This product complies with the following toy safety requirements: EN 71 and

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TRYBIKE Vélo

TRYBIKE

TRYBIKE High Bicycle Manuel utilisateur

TRYBIKE

TRYBIKE LOW TRICYCLE Manuel utilisateur

TRYBIKE

TRYBIKE TRIKE KIT Manuel utilisateur

Manuels Vélo populaires d'autres marques

RAMBO

RAMBO R1000X2M-FF-BFD Manuel utilisateur

Vermeiren

Vermeiren SAFARI Manuel utilisateur

Velec

Velec A2/36V Manuel utilisateur

Coswheel

Coswheel A-ONE Manuel utilisateur

Betzold

Betzold 97869 Manuel utilisateur

Cervélo

Cervélo S3 2019 Manuel utilisateur

Tenways

Tenways AGO X Manuel utilisateur

Festo

Festo EGSC-BS-KF Manuel de la liste des pièces

Gio Electric

Gio Electric H1 Volt Manuel utilisateur

GOGOBEST

GOGOBEST GM30 Manuel utilisateur

DAHON

DAHON CIAO - 2009 Manuel utilisateur

Aprimatic

Aprimatic ONDA 500 Guide de démarrage rapide

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manuel d'instructions

Greyp

Greyp G6 Series Manuel utilisateur

Babboe

Babboe Carve-E Manuel utilisateur

Huka

Huka orthros Manuel utilisateur

Xtracycle

Xtracycle Stoker 2021 Manuel utilisateur

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manuel utilisateur