Trust DV-3400V Manuel utilisateur
DV-3400V POWERCAM VIDEO
1
UK
Product information
1: Shutter button
2: Record (video) button
3: Up-button (zoom in) (c)
4: Down-button (Zoom out)
(d)
5: MENU/OK button
Power button
6: USB Port
7: Card slot
8: A/V out connector
9: LED indicator
10: LCD On/Off switch
11: CF card eject switch
12: Viewfinder
13: LCD display
14: Focus switch
15: Lens
16: Microphone
17: Self-portrait mirror
18: Battery cover
19: Tripod port
20: Speaker
21: Strap hook
Table of Contents
Installation batteries.................................................................................................................................... 2
Taking pictures/Recording movies.............................................................................................................. 2
Playback on camera/television ................................................................................................................... 4
Install driver/software on computer............................................................................................................. 5
Connect camera (Disk Mode)..................................................................................................................... 6
Playback on computer ................................................................................................................................ 6
Connect camera (Live mode/Webcam) ...................................................................................................... 9
Disconnect camera ..................................................................................................................................... 9
Change settings........................................................................................................................................ 10
Insert/remove memory card...................................................................................................................... 12
Error message table ................................................................................................................................. 13
DV-3400V POWERCAM VIDEO
2
Installation batteries
1
a) b)
c)
a) Open battery cover (18).
b) Insert batteries.
c) Close battery cover.
Recommended: use rechargeable Ni-MH
batteries (www.trust.com/battery-chargers).
Taking pictures/Recording movies
1
Turn on camera: Open LCD panel.
Save battery: turn off LCD, look through
viewfinder.
Turn on/off: also possible with MENU/OK
button. Hold 3 seconds.
2
Set focus.
Macro 30 – 40 cm
Normal 40 cm - ∞
Video recording
Take a picture
Step 3, 4, 5
Step 4, 6
3
Start recording: Press Video (2).
Avoid blocking the lens (15).
DV-3400V POWERCAM VIDEO
3
UK
4
Zoom in (3) or Zoom out (4).
5
Stop recording: Press Video.
6
PICTURE:
Press Shutter (1).
Recording audio
1
Turn on camera.
Press MENU/OK (5)
2
Select “Record Audio”.
Use cor dbutton.
3
Start recording: press MENU/OK
Stop recording: press MENU/OK
Avoid hindering microphone. (16)
DV-3400V POWERCAM VIDEO
4
Playback on camera/television
1
Turn on camera.
Press MENU/OK.
Select “PLAYBACK”.
Enter playback mode: Press MENU/OK.
3
Select Audio/Video/Image: Use cor dbutton
View image full screen: press MENU/OK
Start play audio/video file: press MENU/OK
Exit playback mode: press Video
Image Video file Audio file
4
Scroll pictures: Use cor dbutton
5
Volume control: Use cor dto increase/decrease.
Stop: Press MENU/OK
Pause/resume: Press Video.
Only for Video- or Audio file.
6
Delete picture
Press Shutter.
Press Shutter to confirm
DV-3400V POWERCAM VIDEO
5
UK
7
Connect to television:
• Connect video-cable camera
• Connect audio/video-cable television
(Yellow Video in; White Audio in)
• Turn on TV; set to video-input (refer manual
TV)
Camera video output set to PAL (SETTINGS,
TV-System, select PAL)
Install driver/software on computer
1
Turn on Computer
Insert CD-ROM
Click “Install Driver”
Product works only with Windows 98SE, ME,
2000 and XP
2
Follow steps displayed on screen.
Press Finish to close installation.
DV-3400V POWERCAM VIDEO
6
3
After installation driver:
• Install Windows Media Player Codec
• Install Windows Media Format 9 Series
Runtime
• Install Direct X
Windows XP: not needed to install
Programs necessary for viewing video clips
recorded with camera on computer.
Follow on-screen instructions.
Connect camera (Disk Mode)
1
Turn on computer. Start Windows.
Connect USB-cable to computer.
2
Connect USB to camera.
3
Set camera to “DISK MODE” (Use cor dbutton).
Press MENU/OK.
Drivers will be installed automatically.
Two removable disks (internal memory/CF
Card) appear in Windows Explorer/‘My
Computer’.
No files found at one disk; try other disk.
Playback on computer
Windows XP Æ
Windows 2000, ME, 98SE Æ
1, 3
2, 3
DV-3400V POWERCAM VIDEO
7
UK
1
Windows XP
Select “Open folder to view files”
Go to step 3.
Open folder: DCIM / 100MEDIA
*.JPG: Picture files
*.AVI: Video files
*.WAV: Audio files
DV-3400V POWERCAM VIDEO
8
2
Windows 2000, ME, 98:
Double click “My Computer”
Double click “Removable Disk”
Open folder: DCIM / 100MEDIA
*.JPG: Picture files
*.AVI: Video files
*.WAV: Audio files
3
Copy files to folder “My Documents”.
Two removable disks (internal memory/CF
Card) appear in Windows Explorer/‘My
Computer’.
No files found at one disk; try other disk
“3M LCD Power Video Camera Manager” can
be used to manage files. Refer to manual CD-
ROM.
DV-3400V POWERCAM VIDEO
9
UK
Connect camera (Live mode/Webcam)
1
Turn on computer. Start Windows.
Connect USB-cable to computer.
Connect USB to camera.
Set camera to “LIVE MODE” (Use cor dbutton).
Press MENU/OK.
2
Windows XP/2000: Drivers will be installed
automatically.
Windows ME/98SE:
Drivers will be installed automatically. Some
files needed from Windows installation CD-
ROM. Insert when needed.
Work together with MSN Messenger.
Check additional manual at CD-ROM
Disconnect camera
1
Windows XP
1. Click symbol with left mouse button
2. Click “Safely remove USB Mass Storage
Device”. In display appears “Safe to remove
hardware”.
3. Disconnect camera from USB cable.
2
Windows 2000/ME:
1. Click symbol with left mouse button
2. Click “Stop USB Mass Storage Device”. In
display appear “The ‘USB Mass Storage
Device’ can now be safely removed from the
system.”.
3. Disconnect camera from USB cable.
DV-3400V POWERCAM VIDEO
10
Install additional software
Trust Photo Upload Software
Application to upload pictures to the Trust PhotoSite
(www.trustphotosite.com)
Ulead Photo Explorer 8.0 SE Basic
Photo Explorer has tools for acquiring, viewing,
organizing, adjusting and printing digital images.
Cyberlink Power Director 3.0 VE
Power Director is an advanced video editing software
program. It contains Easy-to-use tools for creating
professional video productions.
Refer to manual CD-ROM how to use software.
Change settings
1
Turn on camera
• Press MENU/OK
• Use cor dbutton to select item
• Press MENU/OK to access function.
“Exit”: Close menu
“Playback”: Enter playback mode
“Record Audio”: Start Audio recording
“Self Timer”: Select Self Timer
“Settings”: Set functions.
Table des matières
Autres manuels Trust caméscope
Trust
Trust 622AV Manuel utilisateur
Trust
Trust 350FT Manuel utilisateur
Trust
Trust 738AVl Manuel utilisateur
Trust
Trust 742AV Manuel utilisateur
Trust
Trust 742AV Manuel utilisateur
Trust
Trust 532AV POWER VIDEO Manuel utilisateur
Trust
Trust 732AV Manuel utilisateur
Trust
Trust 632AV Manuel utilisateur
Trust
Trust 300 POWERCAM Manuel utilisateur
Manuels caméscope populaires d'autres marques
Panasonic
Panasonic AG-HMC152EN Manuel utilisateur
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Manuel utilisateur
MYDLINK
MYDLINK DCS-6100LH Manuel utilisateur
Sony
Sony video Hi8 Handycam CCD-TR555 Manuel utilisateur
SECURECOM
SECURECOM V-5014B Manuel utilisateur
Panasonic
Panasonic HDC-SD100 Manuel utilisateur
