4.Check whether the temperature reaches the required value, and then observe the equipment for
more than 24 hours. After confirming the normal performance, a small amount of items can be
placed in the storage room.
5.Try not to open the door in the cooling process, otherwise the temperature will rise.
4.5 Operation after power failure
1.The equipment has memory function for the setting value. When power is restored after power
failure, the equipment will continue the operation.
2.Once the power is interrupted, it is necessary to wait for 5 minutes before switching on again, to
avoid damaging the compressor。
3.Our company guarantees the normal operation of the equipment under certain conditions, but will
not be responsible for any loss or damage of stored items after power failure.
Caution：
The equipment can be moved by casters.
The equipment shall be in charge of special personnel, and the operation status shall be
checked and recorded every day (once every 2-4 hours). The temperature of the storage room will
rise in case of failure or shutdown, and if it can not be repaired in a short period of time, please take
out the stored items and transfer them to suitable place, to avoid damage.
Due to the refrigeration inertia, there is a certain difference between the actual display
temperature and the set temperature of the equipment, which is a normal.
The equipment is for storage , which can not be used for routine production. It is strictly
prohibited to put too many relatively hot items at one time, otherwise the compressor will burn out
after running for a long time. Items must be put in batches to ensure that the temperature of the
cabinet is stepped down until it meets the storage temperature.
Do not use unauthorized electrical appliances inside the equipment.
Do not change the set temperature frequently in a short time, otherwise, due to the large inertia
of cold and hot, the expected setting effect may not be achieved. When placing the items, make
sure that there is a certain air circulation flow space around the cabinet, especially do not block the
temperature sensor in the box (for collecting the temperature), otherwise the stability and accurate
control of the temperature will be affected.
Do not put the articles directly at the bottom of the cabinet, but on the shelf, otherwise the
refrigeration effect will be affected.
If the items too damp or too dry, it will affect the humidity in the cabinet, it is best to keep the
items sealed. The humidity of the working environment will affect the humidity change in the cabinet,
especially when the door is opened frequently or not closed properly.
Warning:
Children are not allowed to play with this equipment as game props, otherwise, the
consequences of injury or loss will be borne by themselves.
