INTRODUCTION
ongratulations on your purchase. This User Guide
will help you setup up and look after your investment. This
Dome camera adopts the latest SONY EFFIO-E D
sensor and DSP technology. Some of the main features
include attractive design, small foot print, 700TVL
Resolution, built-in IR illuminator, true to life colour images
and easy to install in any indoor/outdoor application
making it a truly perfect camera for adding to any new or
existing TV system.
Please read this instruction manual carefully to
ensure proper operation of the product.
CAMERA CONNECTION
PRODUCT BRIEF
*
* *
*
Sensor (CCD) Adopt 700TVL SONY EFFIO-E 1/3" D
*
* *
*
(AGC) Built-in Auto Gain ontrol (AG ) circuitry.
*
* *
*
S anning Mode- PAL
format
*
* *
*
OSD SETTING- Joystick control
OSD(On Screen Display Menu settings FOR DETAILED DESCRIPTION REFER
TO CD SUPPLIED
DC12V
Power Supply
Monitor/ DVR
TruVue amera
TROUBLE SHOOTING
Note
:
: :
:
●
Please note the cameras' operating environment requirements.
Avoid using the camera at too high or too low temperatures.
●
Do not exceed operating temperature -10~+45
℃
.
●
Never install the camera facing directly at the sun or bright (sun
reflected) object. Otherwise, it will damage the D Sensor
●
Do not mount the camera near by heating elements or any form
of radiant heat, this will cause cameras components to fail.
1. No Pi ture after onne ting power
* Power supply may be incorrect, please check the power supply voltage and
polarity is correct, confirm 12VD , 1Amp regulated output.
* Please check all connecting cables are correctly connected and cables are
in perfect condition.
* Please check all monitors/DVRS are connected correctly to the camera's
BN .
2. The image displaying dire tion flowing interferen e ripples and lines
* Possibly caused by the power supply A ripples (common in unregulated
Power supplies) replace with Regulated power supply.
* 50Hz interference from other A circuits, install a 50Hz filter (Video Isolation
transformer) to eliminate the 50Hz A interference (50Hz Hum).
* heck the monitor/DVR and peripheral equipments used are not causing
the issue.
3. The pi ture ba kground olour hanges ontinuously
* Fluorescent lamp electromagnetic fields cause colour roll. This is a
phenomenon of TV cameras.
* Increase the distance between the camera and the fluorescent lamps will
improve the colour changes
4. The pi ture is washed out, ghosting or flu tuating
* Power supply voltage may be unstable.
* Replace power supply with 12VD 1AMP Regulated type
* onnecting cables not connect correctly or high impedance not terminated
* onfirm cables are 100% and the end of line is terminated to 75ohm impedance
To prevent fire or shock hazarded. Do not expose the unit
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
to rain
or moisture.
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure
that may be of sufficient Magnitude to
constitute
a risk of electric shock to persons.
Video
D 12V
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO OUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC. DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF
FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.
Notes
：
：：
：
●The power supply output voltage, current, voltage polarity and
operating temperature must match the camera’s requirement.
●When using the camera in the prone lightning areas, please note to
install lightning protection device to avoid damage to camera and
periherial devices.
●In order to manitain high quality video images, the power supply’s
cable and RG59 coax cable should not exceed cable manufactures
specifications
MENU
UP
DOWN
RIGHT
LEFT
PRESS TO ENTER
OSD Joystick Control
OSD SET
LENS
MANUAL
AUTO
TYPE:D /VIDEO
MODE: LOSE/AUTO/OPEN SPEED:0-255
SHUTTER/
AG
AUTO
HIGH LUMINAN E MODE:SHUT+AUTO IRIS/AUTO
IRIS
BRIGHTNESS:0-255
LOW LUMINAN E MODE:OFF/AG
BRIGHTNESS: ×0.25, ×0.5, ×0.75, ×1
MANUAL
MODE:SHUT+AG
SHUTTER:1/50,1/120,1/250,1/500,1/1000,1/2000,
1/4000,1/10000
AG :6,12,18,24,30,36,42,44.8
WHITE BAL
ATW SPEED/DELAY NT/ATW FRAME/ENVIRONMENT
PUSH/ANTI R/PUSH LO K/USER1/USER2/MANUL
BA K LIGHT OFF/BL /HL
PI T
ADJUST MORROR/BRIGHTNESS/ ONTRAST/SHARPNESS/HUE/GAIN
ATR
OFF
ON LUMINAN E/ ONTRAST
MOTION
DET
OFF
ON DETE T SEN E/BLO K DISP/MONITOR AREA/
AREA SEL/TOP/BOTTOM/LEFT/RIGHT
PRIVA Y
OFF
ON AREA SEL/TOP/BOTTOM/ LEFT/RIGHT/
OLOR/TRANSP/MOSAI
DAY/NIGHT
OLOR
B/W BURST:OFF/ON
AUTO
BURST:OFF/ON
DELAY NT/DAY-NIGHT/NIGHT-DAY
NR NR MODE:Y/ ,OFF,Y,
AMERA ID OFF/ON
SYN INT
LANGUAGE
AMERA RESET/BA K/EXIT/SAVE ALL
ENGLISH/ HINESS/JAPANESS/ESPANOL/PORTUGUES/
PY KNN/FRAN AIS/DEUIS H
For detail OSD instructions refer to the user manual on the CD
NB: Specifications may change without notice
