Trocen AWC608C Manuel utilisateur
AWC608C Manual
Laser Cutting & Engraving System
Laser CAD V5.85
Shenzhen Trocen(Anywells) Automation CO.,LTD
LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
1
Chapter 1 Profile................................................................................................................................................... 4
1.2 Composition ............................................................................................................................................... 4
1.3 Software Versions....................................................................................................................................... 4
1.4 Software Features...................................................................................................................................... 4
1.5 Operating System Environment Requirement........................................................................................ 5
Chapter 2 Installation........................................................................................................................................... 5
2.1 Installation Steps........................................................................................................................................ 5
2.2 Cautions...................................................................................................................................................... 6
Chapter 3 Basic Operation of LaserCAD........................................................................................................ 6
3.1 Main Interface............................................................................................................................................ 6
3.2 Select Communication Mode.................................................................................................................... 7
3.2.1 Select USB Communication Mode......................................................................................... 8
3.2.1.1 Steps of selecting USB communication mode..........................................................8
3.2.2 Select Network Communication Mode................................................................................ 10
3.3 System Options ........................................................................................................................................ 20
3.3.1 Work Space ................................................................................................................................ 22
3.3.2 Manufacturer Parameters....................................................................................................... 23
3.3.3 User Parameter.......................................................................................................................... 26
3.3.4 Advanced Function.................................................................................................................. 28
3.3.5 Work parameters....................................................................................................................... 30
3.4 Open & Save Files.................................................................................................................................... 31
3.4.1 Open File..................................................................................................................................... 31
3.4.2 Save File...................................................................................................................................... 32
3.5 Import & Export Files............................................................................................................................. 32
3.5.1 Import file.................................................................................................................................... 32
3.5.2 Export File................................................................................................................................... 33
3.6 Create Basic Graphic & Edit Node........................................................................................................ 33
3.6.1Create Basic Graphics.............................................................................................................. 33
3.6.2 Edit Node..................................................................................................................................... 34
3.7 Select Object............................................................................................................................................. 36
3.8 Object color.............................................................................................................................................. 37
3.9 Object Transforming............................................................................................................................... 37
3.9.1 Mirror............................................................................................................................................ 37
3.9.2 Tilting and Rotating of Object................................................................................................ 37
3.9.3 Objects Size................................................................................................................................ 38
3.9.4 Array clone ................................................................................................................................. 38
3.9.5 Move object to origin............................................................................................................... 38
3.10 Object Aligning...................................................................................................................................... 39
3.11 Objects Group........................................................................................................................................ 39
3.12 Zoom....................................................................................................................................................... 39
3.13 Tool ......................................................................................................................................................... 39
3.13.1 Manual Order ........................................................................................................................... 40
3.13.2 Automatic Order...................................................................................................................... 40
3.13.3 Smooth Objects ...................................................................................................................... 41
3.13.4 Delete Repeated Lines........................................................................................................... 41
LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
2
3.13.5 Unite Lines................................................................................................................................ 42
3.13.6 Image Invert.............................................................................................................................. 42
3.13.7 Image Dither............................................................................................................................. 42
3.13.8 Parallel Offset.......................................................................................................................... 43
3.13.9 Estimate Work Time............................................................................................................... 44
3.13.10 Simulate.................................................................................................................................. 44
3.14 Default Parameters............................................................................................................................... 44
Chapter 4 Laser Machining.............................................................................................................................. 45
4.1 Position Relative...................................................................................................................................... 45
4.2 Array Output Options............................................................................................................................ 46
4.3 Layer Options.......................................................................................................................................... 47
4.3.1 Set Layer Parameters ............................................................................................................ 48
4.3.2 Adjust Layer Working Sequence ........................................................................................ 51
4.4 Machine Control...................................................................................................................................... 51
4.4.1 Download image data& machine documents management .......................................... 51
4.4.2 Machine Control ........................................................................................................................ 54
Chapter 5 CorelDraw Based Software........................................................................................................ 55
5.1 Manual Download Tool“AWCLaserCut”.............................................................................................. 55
5.2 Display hidden tool “AWCLaserCut”.............................................................................................. 57
5.3 Import DST/DSB file............................................................................................................................. 57
5.4 Switch CorelDraw to LaserCAD ....................................................................................................... 58
Chapter 6 AutoCAD Based Software.......................................................................................................... 59
6.1 ADD AWCLaserCut toolbar................................................................................................................... 59
6.2 Switch AutoCAD to LaserCAD.......................................................................................................... 60
Chapter 7 Introduction Manual of blue LCD Panel .................................................................................... 62
7.1 Function introduction to each key......................................................................................................... 62
7.2 Interface of starting computer............................................................................................................... 63
7.3 Function introduction to main interface............................................................................................... 64
7.3.1 Check and Alter the properties of current file................................................................... 65
7.3.2 Clear total working times of file (refer to view 7-3).......................................................... 66
7.3.3 Switch between “Power 1”&“Power 2” (refer to view 7-3)............................................. 67
7.3.4 Change speed, Maximum power, Minimum power (refer to view 7-3)........................ 68
7.4 Main menu function................................................................................................................................ 68
7.4.1 UDisk file..................................................................................................................................... 69
7.4.2 Parameter Option...................................................................................................................... 71
7.4.3 Origin manage ......................................................................................................................... 71
7.4.4 Origin Mode................................................................................................................................ 72
7.4.5 Control Mode.............................................................................................................................. 73
7.4.6 Memory management .............................................................................................................. 74
7.4.7 Axes Control .............................................................................................................................. 74
7.4.8 Inching control .......................................................................................................................... 75
7.4.9 Cut box ........................................................................................................................................ 76
7.4.10 Network Config........................................................................................................................ 76
7.4.11 Languages................................................................................................................................ 77
7.4.12 System Version....................................................................................................................... 77
LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
3
7.5 Z/U axis.................................................................................................................................................... 78
7.6 Files system.............................................................................................................................................. 78
Chapter 8 Introduction Manual of Color LCD Panel.................................................................................. 80
8.1 Function introduction to each key......................................................................................................... 80
8.2 Interface of starting computer............................................................................................................... 82
8.3 Function introduction to main interface............................................................................................... 83
8.3.1 Check and Alter the properties of current file................................................................... 83
8.3.2 Clear total working times of file............................................................................................ 85
8.4.1 UDisk file..................................................................................................................................... 86
8.4.2Origin manage ............................................................................................................................ 88
8.4.3 Jog Control................................................................................................................................. 89
8.4.4Cut box ......................................................................................................................................... 89
8.4.5 Axes Control .............................................................................................................................. 90
8.4.6Motion Parameters Settings.................................................................................................... 90
8.4.7Common Params Settings....................................................................................................... 91
8.4.8 Network Config.......................................................................................................................... 92
8.4.9 Languages.................................................................................................................................. 92
8.4.10 System Version....................................................................................................................... 93
8.5 Z/U axis..................................................................................................................................................... 93
8.6 Files system............................................................................................................................................... 94
8.7 Manufacturer params settings ............................................................................................................... 94
LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
4
Chapter 1 Profile
1.1 Introduction
This system controls laser CNC machine by computer and completes machining task according to
different requirement of different user. System consists of control system, control panel and matched
software. This manual is to introduce how to use software to complete machining task.
1.2 Composition
Control system consists of hardware (control card) and software. Hardware includes one motion
control card, two connection cables, and laser control software. Control system software and
instruction manual are in the CD with packaging box.
Table 1 Software Content & File Specification
Files or subdirectory
name Content Instruction Manual
LaserCAD folder
Installation procedure of control
system
Copy
Table 2 Composition of Hardware equipment
Project Quantity Instruction
Control card 1 pcs USB port、Network port、U disk port
LCD Panel 1 pcs Size: 150mmX100mm
cable 4 pcs
USB cable、USB extended cable、
network cable、
Panel connection cable
1.3 Software Versions
It includes three versions: General Version (LaserCAD)，CorelDraw based version, AutoCAD
based version.
1.4 Software Features
¾Friendly interface, easy to learn, simple to operate.
¾Be compatible with AI、BMP、PLT、DXF、DST formats
¾Can create simple graphics, characters and edit & layout imported data.
¾Can machine by layers and define output sequence.
¾Customized settings of working procedure and precision, simulation shows the running trial of
LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
5
laser head.
¾Multiple functions of Path Optimization and pause function during working.
¾Multiple saving modes of image and working parameter, and can be recycle.
¾Function of estimating working time and cost budget, intelligent input.
¾Array input, immediately output and go back to origin to output orientation mode.
¾Unique double laser systems working intermittently, working independently and motion trial
with function of offset and control
¾Set the working start point, working path, dock position of laser head according to different
requirement.
¾Be compatible with multiple communication modes. User can use USB communication and
network communication according to situation.
¾Support CorelDraw direct output version, AutoCAD direct output version.
¾Perfect continue to engraving function after outage; main board record working mode and
position of laser head in time, after outage, restart machine, machine can continue unfinished
work.
¾Support 4 axes: X, Y, Z, U, Z-axis is used for elevating and U-axis is used for feeding.
¾Autofocus, no need to adjust the focal distance between laser head and object, convenient to
new user.
¾Engrave photograph directly, support rotating engraving, protect various communications, with
two limit ways: software limit and hardware limit
¾Support slope engraving, main board online upgrade, all capacity and branded U disk.
1.5 Operating System Environment Requirement
⑴Run on Windows( Window2000、Window XP、Vista、Win7 ) system
⑵Celeron 2.1G above
⑶Suggest using 1G above memory.
Chapter 2 Installation
2.1 Installation Steps
Access to installation directory:
Double click Setup.exe:
Click【Install/安装】:
LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
6
After confirming installation path, click 【OK/确定】.After installation, it will remind if need to
continue to install USB driver.
Click【是(Y)】：
Click【OK/确定】, the installation is done successfully.
2.2 Cautions
（1） Some antivirus software will take the file “LaserCAD/Setup.exe” in the installation directory
as virus. Please make sure the antivirus software will not delete this file.
（2） When the file “LaserCAD/Setup.exe” is damaged, below dialog will displayed during
installation：
If it’s happened, please go back to get “LaserCAD” installation package again.
Chapter 3 Basic Operation of LaserCAD
3.1 Main Interface
After the software being started, you can see the interface as indicated below. Being familiar with this
interface will be the basis of using this software to do laser machining.
LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
7
【Menu bar】：Main function is to execute commend options in menu bar. Executing commend
options is the basic operation; Menu bar includes 7 functions like file, edit, draw,
tool, options, view and help.
【Tool bar】：There are some functions completed by commend buttons in tool bar. Most of these
functions are sorted from menu bar.
【Object bar】：Provide selecting object during operation and relevant properties during using tool.
It can control the change of object by setting relevant properties in property bar.
【Draw bar】：It’s on the left of working area. With draw tool in draw bar, it makes operation more
flexible and convenient.
【Align bar】：Make align multi objects to perfect the layout of page.
【Color bar】：Alter the color of selected object
【Control panel】：Use control panel to finish several tasks of laser machining, including setting
communication IP, setting layer parameter, loading graphic and so on.
3.2 Select Communication Mode
Computer can communicate with AWC608 control panel by USB and network to operate the laser
Align bar
Menu ba
r
toolbar
Object bar
View zone
Draw ba
r
Control panel
Color ba
r
Status bar
LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
8
machine. If the communication mode is not setup correctly, user operates laser machine by this software,
then software will come out tool tip as below:
3.2.1 Select USB Communication Mode
3.2.1.1 Steps of selecting USB communication mode
Click【Select mode】:
Click【USB mode】:
LASER ENGRAVING&CUTTING CONTROLLER AWC608
、
9
Next setup USB communication port, double click :
Name【Device Name】as “Machine 1”, (Firstly use USB cable to connect computer with control panel)
and then click【FindCom】:
Click【OK】:
Table des matières
Autres manuels Trocen Contrôleurs
