Trivisio M3-Stereo Manuel utilisateur
2009/08/20
User Manual
M3-Stereo
Stereo Head-Mounted-Display (HMD), DVI
Subject to technical modifications
Copyright: Trivisio rototyping GmbH, Robert-Bosch-Str. 30, D-63303 Dreieich
M3-Stereo HMD User Manual 2
WARNING
efore using the M3-Stereo HMD please read carefully
these safety instructions.
Read this handbook and use the M3-Stereo HMD device in
strict accordance in order to prevent any damage to your
eye, other injury, loss of visual functions, property damage
or death.
Children under the age of fifteen may not use this product.
We strongly advise you to get familiar with the
M3-Stereo HMD device and its capabilities before you use
it for the first time.
M3-Stereo HMD User Manual 3
Table of Contents
Table of Contents...........................................................................3
1
Safety instructions.....................................................................4
1.1
Health concerns ..................................................................4
1.2
General safety hints ............................................................5
1.3
Warning for electrical products........................................5
2
Content of the M3-Stereo HMD Kit..........................................6
3
Description ................................................................................7
3.1
Head Mounted Display HMD ............................................7
3.2
Connectors ...........................................................................8
4
General Operating Instructions ..............................................9
4.1
reparation...........................................................................9
4.2
Connecting to external video sources ...........................9
4.3
Adjusting the graphics driver ..........................................10
4.4
Adjusting the image..........................................................11
4.5
Adjusting the HMD.............................................................12
4.6
Using different Stereo Modes ..........................................13
4.7
Using the integrated microphone..................................14
4.8
Using external earphones ................................................16
4.9
Firmware update...............................................................17
5
Maintenance and Cleaning Instructions.............................18
6
Troubleshooting ......................................................................19
7
Returning used electronic devices in EU countries ............20
8
Technical Data .......................................................................21
8.1
Head Mounted Display ....................................................21
M3-Stereo HMD User Manual 4
1 Safety instructions
1.1 Health concerns
WARNING: Eye Disease, Eye Injury, and Glaucoma
If you have been diagnosed with or are susceptive to eye
disease, eye injury, or glaucoma consult your doctor before
use and do not use without your doctor’s approval.
CAUTION: Heart Disease, High Blood ressure
If you have a history of heart disease or high blood pressure
consult your doctor before use and do not use without his
approval.
CAUTION: Seizures
If you have a history of temporary spasm, unconsciousness, or
epileptic seizures from light stimulation, consult your doctor
before use and do not use without his approval.
If any of the following symptoms occur, if using M3-Stereo HMD,
stop using immediately and rest:
eye fatigue or irritation,
headaches or dizziness,
aches and pain in the neck or shoulders,
double vision,
nausea or motion sickness,
inability to focus on the displays.
Misuse or overuse of this product may result in eye damage, or
loss of visual functions.
M3-Stereo HMD User Manual 5
1.2 General safety hints
Avoid getting the cable entangled around your neck,
body or arms. Wear the cable close to your body.
To ensure that the device does not fall off during use,
always have it tightened with an adequate tension.
1.3 Warning for electrical products
To avoid any risk of electrocution, do not bring any part of
the M3-Stereo HMD in contact with water when it is
connected to an AC outlet or a C.
Avoid using and storing the M3-Stereo HMD at wet, humid,
dusty and smoky surroundings and extreme temperatures.
Do not use M3-Stereo HMD at temperatures below -10°C
and above +40°C. Avoid dropping or mechanical shock,
as frame and displays may be deformed.
Always unplug the M3-Stereo HMD when it will not be
used.
In case of damage contact your retailer. There are no user
serviceable parts. Only qualified service personnel should
perform any service required on this product.
M3-Stereo HMD User Manual 6
2 Content of the M3-Stereo HMD Kit
The M3-Stereo HMD kit contains the following elements. lease
check that all of these are included. If any item is not supplied
contact your M3-Stereo HMD dealer.
HMD (1)
1
M3-Stereo HMD User Manual 7
3 Description
3.1 Head Mounted Display HMD
The HMD contains one microdisplays (1) to show the images.
The cable (2) is permanently attached to the dongle. At the
end of the cable there are several connectors (see 3.2
Connectors page 8).
1
2
M3-Stereo HMD User Manual 8
3.2 Connectors
The cable of HMD contains the following connectors:
(1) DVI-D (only digital signals !) Main channel (Left eye)
(2) DVI-D (only digital signals !) Aux channel (Right eye)
(3) USB (power-supply, control and firmware updates)
(4) 3.5mm pink jack for earphones
(5) 3.5mm green jack for microphone
3
2
1
4
5
M3-Stereo HMD User Manual 9
4 General Operating Instructions
4.1 Preparation
Unpacking the Device
lease unpack the devices and compare with the list
under paragraph 2 on page 6 to check that all parts are
complete. lease contact your dealer if any parts are
missing.
4.2 Connecting to external video sources
Connect the cables to PC
To prevent damage to the electronic, first connect the DVI
video connector with your C and then the USB connector.
lug in all other connectors. For normal operation at least the
DVI and USB plugs (see 3.2 Connectors page 8) are needed. If
the DDC function of your graphics card is working correct the
M3-Stereo HMD will be recognized automatically and you will
see an image inside the HMD.
If the device is not recognized automatic reboot your C.
If you do not see an image after rebooting please refer to
4.3 Adjusting the graphics driver page 10.
M3-Stereo HMD User Manual 10
4.3 Adjusting the graphics driver
If you have connected the HMD to secondary DVI output of
your graphic card then adjust the driver settings: In MS-
Windows® go to menue "Display roperties". You should see
two monitors. Click on the appropriate symbol and activate
"Extend my Windows desktop onto this monitor".
Table des matières
Autres manuels Trivisio Moniteur
