Tripp Lite B110-SP-CAT Manuel utilisateur

Quick Start Guide

Digital Signage In-Line

HDBaseT & 10G Network

Surge Protector

Model: B110-SP-CAT

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

Español 7 • Français 13 • Русский 19

18-10-218-9338D4.indb 1 12/10/2018 6:23:17 PM

Package Includes

Product Features

• B110-SP-CAT

• Grounding Wire, 12 in. / 305 mm

• Mounting Screws (x4)

• Screw Anchors (x4)

• Grounding Wire Screw

• Quick Start Guide

• Protects your network equipment’s inputs and outputs against electrostatic

discharge (ESD), lightning surges and cable discharge events

• Meets the following IEC regulations:

o IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact)

o IEC 61000-4-5 (Lightning) 2kA (8/20µs), 6kV (8/20µs)

• Surge reaction speed < 1 ns

• Solid-state silicon-avalanche technology

• Supports network data transmission speeds up to 10 Gbps

• Supports resolutions up 4K @ 60 Hz (HDBaseT)

• Easy in-line installation with integrated mounting ears

• Passive by design – no external power required

18-10-218-9338D4.indb 2 12/10/2018 6:23:17 PM

Installation

Note: The following instructions assume that two network devices are currently

connected together.

Single Device Protection:

1. Disconnect the installed patch cable from the device you wish to protect

and attach this cable to the “Cable End” of the In-Line HDBaseT & 10G

Network Surge Protector.

2. Using a Cat5/5e/6 patch cable (not included), connect the device to be

protected to the “Equipment End” of the In-Line HDBaseT & 10G Network

Surge Protector.

Note: For best protection performance, the patch cable between the “Equipment

End” of the In-Line HDBaseT & 10G Network Surge Protector and the equipment

to be protected should not exceed 300 ft. (90 m). Tripp Lite’s N001-Series Cat5e

Snagless Patch Cables are recommended.

3. Connect the ground wire to the In-Line HDBaseT & 10G Network Surge

Protector and then to earth ground.

NVR

Equipment End

Network Device

(Protected)

Network Source

(Unprotected)

In-Line HDBaseT

& 10G Network

Surge Protector

Cable End

18-10-218-9338D4.indb 3 12/10/2018 6:23:17 PM

Installation

Multiple Device Protection:

Note: The maximum distance between any two In-Line HDBaseT & 10G Network

Surge Protectors is 328 ft. (100 m).

1. Disconnect the installed patch cables from both of the devices you wish to

protect.

2. Connect an In-Line HDBaseT & 10G Network Surge Protector to each end

of the previously uninstalled patch cable, ensuring both ends of the patch

cable are connected to the “Cable End” of the In-Line HDBaseT & 10G

Network Surge Protector.

3. Using Cat5/5e/6 patch cables (not included), connect the “Equipment

End” of each In-Line HDBaseT & 10G Network Surge Protector to the

network devices you wish to protect.

Note: For best protection performance, the Cat5/5e/6 patch cable between the

“Equipment End” of the In-Line HDBaseT & 10G Network Surge Protector and the

network equipment to be protected should not exceed 300 ft. (90 m). Tripp Lite’s

N001-Series Cat5e Snagless Patch Cables are recommended.

4. Connect the ground wire to each In-Line HDBaseT & 10G Network Surge

Protector and then to earth ground.

HDBaseT TX and Source

(Protected)

HDBaseT RX and Device

(Protected)

Equipment End

Cable End

Monitor

HE02ER

Equipment End

Cable End

328 ft. / 100 m

4K @ 60 Hz

18-10-218-9338D4.indb 4 12/10/2018 6:23:17 PM

Speciﬁcations

Input / Output Connectors RJ45 (Female)

ESD Protection 15kV (Air), 8kV (Contact)

Surge Protection 2kA (8/20µs) / 6kV (8/20µs)

Surge Reaction Speed <1 ns

Operating Temp 14 to 167°F / 10 to 75°C

Storage Temp -40 to 194°F / -40 to 90°C

Bandwidth (Data Rate) Up to 10 Gbps

Return Loss (100Ω) 16 dB

Max Resolution Supported 4K @ 60 Hz

Dimensions 2.63 x 3.43 x 1.06 / 67 x 87 x 27 mm

Weight 0.28 lb. / 127 g

18-10-218-9338D4.indb 5 12/10/2018 6:23:17 PM

Warranty and Product Registration

2-Year Limited Warranty

Tripp Lite warrants its products to be free from defects in materials and workmanship for a period

of two (2) years from the date of initial purchase. Tripp Lite’s obligation under this warranty is

limited to repairing or replacing (at its sole option) any such defective products. To obtain service

under this warranty, you must obtain a Returned Material Authorization (RMA) number from

Tripp Lite or an authorized Tripp Lite service center. Products must be returned to Tripp Lite or an

authorized Tripp Lite service center with transportation charges prepaid and must be accompanied

by a brief description of the problem encountered and proof of date and place of purchase. This

warranty does not apply to equipment, which has been damaged by accident, negligence or

misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, Tripp Lite MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid

limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL Tripp Lite BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS

PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, Tripp Lite is not

liable for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment,

loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Product Registration

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be

automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to signiﬁcantly affect its safety

or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without

notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

18-10-218-9338D4.indb 6 12/10/2018 6:23:17 PM

Guía de Inicio Rápido

Supresor de

Sobretensiones de Red

HDBaseT y 10G En Línea

Modelo: B110-SP-CAT

1111 W. 35th Street, Chicago, IL 60609 EE UU • www.tripplite.com/support

English 1 • Français 13 • Русский 19

18-10-218-9338D4.indb 7 12/10/2018 6:23:17 PM

El Paquete Incluye

Características del Producto

• B110-SP-CAT

• Cable de Conexión a Tierra, 30.5 cm [12"]

• Tornillos de Instalación (x4)

• Tornillos de Anclaje (x4)

• Tornillo de Conductor a Tierra

• Guía de Inicio Rápido

• Protege las entradas y salidas de su equipo de red contra descarga

electrostática [ESD], sobretensiones por rayos y eventos de descarga de

cable

• Cumple con los siguientes reglamentos de IEC:

o IEC 61000-4-2 (ESD) +/- 15kV (Aire), +/- 8kV (Contacto)

o IEC 61000-4-5 (Rayo) 2kA (8µs / 20µs), 6kV (8µs / 20µs)

• Velocidad de reacción contra sobretensiones: < 1 ns

• Silicio de estado sólido de Avalanche Technology

• Soporta velocidades de transmisión de datos de red hasta 10 Gbps

• Soporta resoluciones de 4K @ 60 Hz (HDBaseT)

• Fácil instalación en línea con orejas de instalación integradas

• Diseño pasivo – No requiere de alimentación externa

18-10-218-9338D4.indb 8 12/10/2018 6:23:17 PM

Instalación

Nota: Las siguientes instrucciones asumen que dos dispositivos de red están

actualmente conectados entre sí.

Protección de un Solo Dispositivo:

1. Desconecte el cable patch instalado del dispositivo que desee proteger y

conecte este cable al “extremo del Cable” del Supresor de Sobretensiones

de Red HDBaseT y 10G En Línea.

2. Utilizando un cable patch Cat5 / Cat5e / Cat6 (no incluido), conecte

el dispositivo a proteger a la “Terminal del Equipo” del equipo en línea

Supresor de Sobretensiones de Red HDBaseT En Línea y 10G.

Nota: Para obtener el mejor rendimiento de protección, el cable patch entre

la “Terminal del Equipo” del Supresor de Supresor de Sobretensiones de Red

HDBaseT y 10G En Línea y el equipo a proteger no debe superar 91 m [300 pies].

Se recomiendan Cables Patch Snagless Cat5e Serie N001 de Tripp Lite

3. Conecte el cable de tierra a cualquier extremo Supresor de Sobretensiones

de Red HDBaseT y 10G En Línea y después a tierra física.

NVR

Terminal del

Equipo

Dispositivo de

Red (Protegido)

Fuente de Red (No

protegida)

Supresor de

Sobretensiones de

Red HDBaseT y 10G

En Línea

Extremo de Cable

18-10-218-9338D4.indb 9 12/10/2018 6:23:17 PM

Instalación

Protección de Múltiples Dispositivos:

Nota: La distancia máxima entre dos Supresores de Sobretensiones de Red HDBaseT

y 10G En Línea es de 100 m [328 pies].

1. Desconecte los cables patch instalados de ambos dispositivos que desea

proteger.

2. Conecte un Supresor de Sobretensiones de Red HDBaseT y 10G En Línea

a cada extremo del cable patch desinstalado anteriormente, asegurándose

de que ambos extremos del cable patch están conectados a la “Terminal

del Cable” del Supresor de Sobretensiones de Red HDBaseT En Línea y

10G

3. Usando cables patch Cat5 / Cat5e / Cat6 (no incluidos), conecte la

“Terminal de Equipo” de cada Supresor de Sobretensiones de Red

HDBaseT y 10G En Línea a los dispositivos de red que desee proteger.

Nota: Para mejor rendimiento de protección, el cable patch Cat5 / Cat5e / Cat6

entre la “Terminal de Equipo” del Supresor de Sobretensiones de Red HDBaseT

y 10G En Línea y los equipos de red a proteger no debe superar los 91 m [300

pies]. Se recomiendan Cables Patch Snagless Cat5e Serie N001 de Tripp Lite

4. Conecte el cable de tierra a cada Supresor de Sobretensiones de Red

HDBaseT y 10G En Línea y después a tierra física.

HDBaseT TX y Fuente

(Protegida)

HDBaseT RX y Dispositivo

(Protegido)

Terminal del

Equipo

Extremo de Cable

Monitor

HE02ER

Terminal del

Equipo

Extremo

de Cable

100 m [328 pies]

4K @ 60 Hz

18-10-218-9338D4.indb 10 12/10/2018 6:23:17 PM

Table des matières

Langues :

Autres manuels Tripp Lite Parafoudre

Tripp Lite

Tripp Lite IBAR12/20ULTRA AGIB120V20SSRM Manuel utilisateur

Tripp Lite

Tripp Lite SUPER7 Manuel utilisateur

Tripp Lite

Tripp Lite SK6-0B Manuel utilisateur

Tripp Lite

Tripp Lite ISOBAR6 Manuel utilisateur

Tripp Lite

Tripp Lite isobar HT1210ISOCTR Manuel utilisateur

Tripp Lite

Tripp Lite PM6SN1 Manuel utilisateur

Tripp Lite

Tripp Lite IBAR12/20ULTRA AGIB120V20SSRM Manuel utilisateur

Tripp Lite

Tripp Lite ISOBAR6 Manuel utilisateur

Tripp Lite

Tripp Lite IBAR4 Manuel utilisateur

Tripp Lite

Tripp Lite HT2210ISOCTR Manuel utilisateur

Tripp Lite

Tripp Lite TLP82F Manuel utilisateur

Tripp Lite

Tripp Lite TLP606 Manuel utilisateur

Tripp Lite

Tripp Lite Protect It! TLM825SA Manuel utilisateur

Tripp Lite

Tripp Lite ISOBAR6ULTRAHG Manuel utilisateur

Tripp Lite

Tripp Lite TLP31SAT Manuel utilisateur

Tripp Lite

Tripp Lite ECO-Surge AV10IRG Manuel utilisateur

Tripp Lite

Tripp Lite TLM626TEL15 Manuel utilisateur

Tripp Lite

Tripp Lite TLP712B Manuel utilisateur

Tripp Lite

Tripp Lite isobar IBAR4ULTRAUSBB Manuel utilisateur

Tripp Lite

Tripp Lite IBAR12 Manuel utilisateur

Tripp Lite

Tripp Lite IBAR12 Manuel utilisateur

Tripp Lite

Tripp Lite ISOTEL6ULTRA Manuel utilisateur

Tripp Lite

Tripp Lite ISOBAR4ULTRA Manuel utilisateur

Tripp Lite

Tripp Lite Data Shield DB25-ALL Manuel utilisateur

Manuels Parafoudre populaires d'autres marques

ELAC

ELAC ProteK PR91-W Manuel utilisateur

Tsubaki

Tsubaki TSM4000M1 Manuel utilisateur

QVS

QVS PP134C Manuel utilisateur

CyberPower

CyberPower CSP604T Manuel utilisateur

Davis Instruments

Davis Instruments Radio Surge Protector Manuel utilisateur

M-system

M-system MGA-100 Manuel utilisateur

CyberPower

CyberPower CSP706T Manuel utilisateur

CyberPower

CyberPower B300WRC1 Manuel utilisateur

M-system

M-system MGD-24 Manuel utilisateur

Leviton

Leviton 51120-3R Manuel utilisateur

Panamax

Panamax MAX 5400-EX Manuel utilisateur

CyberPower

CyberPower B1006T Manuel utilisateur

OBO Bettermann

OBO Bettermann ÜSM-20-230I1PE65 Manuel utilisateur

Minuteman

Minuteman MMS7120RCT Manuel utilisateur

Leviton

Leviton 52412-DS3 Manuel utilisateur

Savio

Savio LZ-07 Manuel utilisateur

Siemens

Siemens HNM3M120 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric LITOL LTM-125RF Manuel utilisateur