Tripp Lite UPS Communication Cable Kit Manuel utilisateur

Owner’s Manual

UPS Communication Cable Kit

For IBM®System i™Servers

Also Supports IBM AS/400®and iSeries™Servers

Package Contents 2

Features 2

System Requirements 2

UPS System Compatibility 2

Installation 3

Configuration 3

Quick Test 3

Warranty Registration 4

Warranty Information 4

WARNING: Follow the instructions in this manual to assist the

proper installation, configuration and operation of this product. This

manual is a supplementary guideline, not a replacement for your

server documentation. Refer to your server documentation for

additional information.

Business Machines Corporation in the United States, other countries, or both. SmartOnline™ is a trademark of Tripp Lite. All

other trademarks are the property of their respective owners.

1111 W. 35th Street Chicago, IL 60609 USA

Customer Support: (773) 869-1234 • www.tripplite.com

WARRANTY

REGISTRATION

to win a FREE Tripp Lite product!

www.tripplite.com/warranty

200607131 93-2576 AS400 Cable OM.qxd 9/6/2006 4:43 PM Page 1

Package Contents

• 2 UPS Communication Cables (Part # 73-1070 and Part # 73-1071)

• 1 Owner's Manual

Features

In conjunction with Tripp Lite SmartOnline™UPS Systems, the UPS Communication Cable

Kit For IBM System i Servers protects IBM System i, AS/400 and iSeries Midrange Servers

from potential system corruption due to loss of power without prior operating system

shutdown. Using a UPS system without a communication cable protects against power

failures that do not exceed the battery capacity of the UPS system, but the potential for

system corruption still exists as the server drains the UPS system's battery during extended

blackouts. When connected to a Tripp Lite UPS System with the appropriate communication

cable from this kit, the server can monitor the status of the UPS and initiate an automatic,

graceful and orderly unattended system shutdown when necessary.

System Requirements

One of the Following:

• System i, AS/400 or iSeries Server with 9-pin J14 Port

• System i, AS/400 or iSeries Server with T1 or T2 Port*

*Requires the use of IBM adapter cable (FC1827; IBM Part # 97P4299). Also requires the complete shutdown

of the server and removal of all power cords for a period of 5 minutes immediately prior to installation.

UPS System Compatibility

SmartOnline Communication

UPS Systems Compatible Cable Port Connection

1,000 VA - 3,000 VA Part # 73-1070 RS-232 Serial Port

5,000 VA - 10,000 VA Part # 73-1071 Dry Contact Port

20,000 VA - 80,000 VA Part # 73-1071 Dry Contact Port

200607131 93-2576 AS400 Cable OM.qxd 9/6/2006 4:43 PM Page 2

Installation

First, install a Tripp Lite SmartOnline UPS System of appropriate capacity to support the

server. Consult the UPS System Owner's Manual for installation instructions.

After the UPS System has been installed successfully, use the UPS Communication Cable

Kit For IBM System i Servers to connect the server and the UPS System, noting the

following instructions:

• Choose the appropriate communication cable for your SmartOnline UPS System:

use Part # 73-1070 for 1,000 VA - 3,000 VA; use Part # 73-1071 for 5,000+ VA.

• If you are connecting the cable to a server equipped with a 9-pin J14 port, such as an

AS/400 Model 170 or iSeries Model 270, there's no need to power down the server

before installation.

• If you are connecting the cable to a server equipped with a T1 or T2 port, such as an

IBM System i5™Model 520, you must shut down the server and completely remove all

power cords for 5 minutes immediately prior to installation. After 5 minutes have

elapsed, attach the appropriate cable and restart the server. This allows the server to

configure the T1 or T2 port as a UPS monitoring port. Installation on the T1 or T2 port

also requires the use of an IBM adapter cable (FC1827; IBM Part # 97P4299).

Configuration

The user must set three system values that govern the actions of the operating system during

a power failure indication: QUPSMSGQ, QUPSDLYTIM and QPWRRSTIPL.

• QUPSMSGQ specifies the message queue that receives messages upon power failure.

• QUPSDLYTIM specifies the time in seconds between power failure and shutdown

initiation.

• QPWRRSTIPL selects manual or automatic restart of the Initial Program Load (IPL)

when utility power returns.

Quick Test

1. Use the CL command DSPMSG MSGQ(QSYSOPR) to monitor the system for messages

regarding UPS status. (QSYSOPR is the default message queue. If the system value

QUPSMSGQ has been changed, replace QSYSOPR in this command with the

appropriate value.)

2. Disconnect the UPS communication cable from the server.

3. A message should appear indicating that the UPS is no longer connected to the server.

4. Reattach the UPS communication cable.

5. A message should appear indicating that the UPS is attached to the server.

Please note that the message queue will indicate only UPS detection, UPS disconnection

and power loss. If the server detects a low battery condition, it will initiate an immediate

shutdown.

200607131 93-2576 AS400 Cable OM.qxd 9/6/2006 4:43 PM Page 3

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite

product. You'll automatically be entered into a drawing for a chance to win a FREE

Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Warranty Information

Lifetime Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for life. TRIPP LITE's obligation

under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service

under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized

TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with

transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof

of date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident,

negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit

limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the

purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED

OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or

revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third

parties, or otherwise.

Tripp Lite follows a policy of continuous improvement. Specifications are subject to change without notice.

1111 W. 35th Street Chicago, IL 60609 USA

Customer Support: (773) 869-1234 • www.tripplite.com

200607131 93-2576

200607131 93-2576 AS400 Cable OM.qxd 9/6/2006 4:43 PM Page 4

Table des matières

Autres manuels Tripp Lite Alimentation

Tripp Lite

Tripp Lite Smart Online SU1000XL Manuel utilisateur

Tripp Lite

Tripp Lite SmartPro SMART500RT1U Manuel utilisateur

Tripp Lite

Tripp Lite SmartOnline SU8000RT3UPM Manuel utilisateur

Tripp Lite

Tripp Lite PR 30 Manuel utilisateur

Tripp Lite

Tripp Lite HCRK-36 Manuel utilisateur

Tripp Lite

Tripp Lite APS INT 512 Manuel utilisateur

Tripp Lite

Tripp Lite SmartPro XL INT 2200 Manuel utilisateur

Tripp Lite

Tripp Lite PR40 Manuel utilisateur

Tripp Lite

Tripp Lite INTERNET350U Mode d’emploi

Tripp Lite

Tripp Lite HCRK-2 Manuel utilisateur

Tripp Lite

Tripp Lite HCRK-3 Manuel utilisateur

Tripp Lite

Tripp Lite SmartPro SMART3000RM2U Manuel utilisateur

Tripp Lite

Tripp Lite MPS912 Instructions d'installation et d'utilisation

Tripp Lite

Tripp Lite Extended-Run Single-Phase Battery Cabinet Manuel utilisateur

Tripp Lite

Tripp Lite SMARTONLINE SUPDU001 Manuel utilisateur

Tripp Lite

Tripp Lite BP24V15RT2U Manuel utilisateur

Tripp Lite

Tripp Lite BP240V10RT-3U Manuel utilisateur

Tripp Lite

Tripp Lite Waber PS Series Manuel utilisateur

Tripp Lite

Tripp Lite HCRK-INT Manuel utilisateur

Tripp Lite

Tripp Lite HTR05-1U Manuel utilisateur

Tripp Lite

Tripp Lite PR 4.5 Manuel utilisateur

Tripp Lite

Tripp Lite Backup Power Block AV550SC Manuel utilisateur

Tripp Lite

Tripp Lite SmartOnline 5KVA Manuel utilisateur

Tripp Lite

Tripp Lite PR10 Manuel utilisateur

Manuels Alimentation populaires d'autres marques

Monacor

Monacor PS-12CCD Manuel utilisateur

VOLTIMA

VOLTIMA MagicBox 15 Manuel utilisateur

Agilent Technologies

Agilent Technologies 6032A Manuel utilisateur

Miller

Miller Auto Deltaweld 452 Manuel utilisateur

BCP

BCP PUOUBK Feuille d'instructions

HC 2210 Manuel utilisateur

Puls

Puls CT5.241 Manuel utilisateur

OCZ

OCZ ZX1250W Manuel utilisateur

iseg

iseg ECH 238 Manuel utilisateur

Power

Power XXL A Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 6631B Manuel utilisateur

Renogy

Renogy PHOENIX 300 Manuel utilisateur

HP 6200B Manuel de service

Epson

Epson Stylus Scan 2500 Manuel d'utilisation

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manuel utilisateur

Puls

Puls MiniLine ML50.100 Manuel utilisateur

Puls

Puls AS-Interface SLA4.100 Manuel utilisateur

Kenwood

Kenwood PS-60 Manuel utilisateur