Trinity TBFLNA-1406 Manuel utilisateur
OWNER’S MANUAL
TRINITY 24” BAMBOO KITCHEN CART
W/ DROP LEAF
Model # TBFLNA-1406
Everything in its place.®
© 2017 TRINITY - 800.985.5506
1
E
Your TRINITY 24” Bamboo Kitchen Cart should include the following parts. Please inspect box contents
to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online
via our “Contact Us” section at www.trinityii.com.
An electric screwdriver or drill is recommended for ease of assembly.
PARTS LIST
ABC
TOP (1) LEFT
SIDE FRAME (1)
RIGHT
SIDE FRAME (1)
D
UPPER
SHELF (1)
FG
LOWER
SHELF (1)
BACK FRAME (1) LOWER SHELF
FRAME (2)
H
DRAWER FRONT
PANEL (1)
IJK
DRAWER BACK
PANEL (1)
DRAWER LEFT
PANEL (1)
L
DRAWER RIGHT
PANEL (1)
DRAWER BOTTOM
PANEL (1)
PARTS LIST
© 2017 TRINITY - 800.985.5506 2
AA
SCREW
(16) + (2) extra
black
DRAWER
SCREW (8) + (1) extra
BB CC
DOWEL
(18) + (2) extra
HANGER STUD (7)
DD
NON-LOCKING
CASTER (2)
EE FF GG
LOCKING
CASTER (2)
HH
WASHER (4)
II
SCREWDRIVER (1)
WRENCH (1)
JJ KK
CONNECTOR SCREW
(12) + (1) extra
CAM LOCK
(12) + (1) extra
ASSEMBLY INSTRUCTIONS
Lay RIGHT SIDE FRAME (C) on its side.
Insert (2) DOWELS (CC) on each cross
beam on the RIGHT SIDE FRAME (C).
Align holes on UPPER SHELF (D) with
DOWELS (CC) and push onto middle cross
beam on RIGHT SIDE FRAME (C). Align
holes on the LOWER SHELF (E) with frame
from Step 1 with DOWELS (CC) and push
onto lower cross beam on RIGHT SIDE
FRAME (C).
Insert (6) SCREWS (AA) through cross
beams of RIGHT SIDE FRAME (C) and
fasten tightly to UPPER SHELF (D) and
LOWER SHELF (E) with SCREWDRIVER (II).
Lay LOWER SHELF (E) on a clean surface with holes
facing up. Insert (4) DOWELS (CC) into the inner
holes as pictured.
Orient LOWER SHELF FRAME (G) with Trinity logo
facing out. Align holes on LOWER SHELF FRAME
(G) with DOWELS (CC) and push onto LOWER
SHELF (E).
Insert (4) SCREWS (AA) through LOWER SHELF
FRAME (G) and fasten tightly to LOWER SHELF (E)
with SCREWDRIVER (II).
STEP 1
STEP 2
AA (4) CC (4)
G (2)
II
E (1)
© 2017 TRINITY - 800.985.5506
3
II (1)
E
AA
CC
G
AA (6) CC (4)
D (1)
C (1) II (1)
II
AA
CC
D
C
E
G
ASSEMBLY INSTRUCTIONS
Screw (2) CONNECTOR SCREWS (JJ) to
RIGHT SIDE FRAME (C) as shown with
the SCREWDRIVER (II). Insert (2) CAM
LOCKS (KK) to BACK FRAME (F).
Push BACK FRAME (F) with CAM
LOCKS (KK) onto the CONNECTOR
SCREWS (JJ).
Use SCREWDRIVER (II) to turn CAM
LOCKS (KK) in clockwise direction until
BACK FRAME (F) is pulled tight with
RIGHT SIDE FRAME (C).
STEP 3
Insert (4) DOWELS (CC) in the LEFT SIDE FRAME
(B). Place (2) on each cross beam as shown.
Screw (2) CONNECTOR SCREWS (JJ) to LEFT SIDE
FRAME (B) as shown with the SCREWDRIVER (II).
Insert (2) CAM LOCKS (KK) to BACK FRAME (F)
with pointer arrow pointing toward the edge.
Take LEFT SIDE FRAME (B) and align
CONNECTOR SCREWS (JJ) to holes in BACK
FRAME (F), then DOWELS (CC) to UPPER SHELF
(D), then LOWER SHELF (E).
Use the SCREWDRIVER (II) to turn CAM LOCKS
(KK) in clockwise direction until BACK FRAME (F)
is pulled tight with LEFT SIDE FRAME (B).
Insert (6) SCREWS (AA) through cross beams of
LEFT SIDE FRAME (B) and fasten tightly to
UPPER SHELF (D) and LOWER SHELF (E) with
SCREWDRIVER (II).
STEP 4
© 2017 TRINITY - 800.985.5506 4
KK (2)
F (1)
AA (6) CC (4) II (1)
B (1)
JJ
F
AA
JJ
B
II
E
D
F
CJJ (2) II (1)
KK
CC
KK
KK (2)
JJ (2)
Holes on
this side.
© 2017 TRINITY - 800.985.5506
5
ASSEMBLY INSTRUCTIONS
With two people, carefully stand partially
assembled Kitchen Cart upright.
By hand, screw (2) HANGER STUDS (DD)
into the insert nuts on RIGHT SIDE FRAME
(C).
By hand, screw (5) HANGER STUDS (DD)
into the insert nuts on LEFT SIDE FRAME
(B).
To prepare for the next step, extend the
triangular support by pulling it away from
the SIDE FRAMES (B, C) and point it
outward. Do this to all (4) triangular
supports on both sides.
Take a NON-LOCKING CASTER (EE) and insert
threaded stem through WASHER (GG) and screw
into one of the rear legs. Fully tighten with WRENCH
(HH). Repeat with the other NON-LOCKING CASTER
(EE).
Take a LOCKING CASTER (FF) and insert threaded
stem through WASHER (GG) and screw into one of
the front legs. Tighten with WRENCH (HH). Repeat
with the other LOCKING CASTER (FF).
Note: Make sure LOCKING CASTERS (FF) are on the
same side.
Use the provided caster wrench to tighten
completely. Failure to do as instructed could result
in the caster stem breaking.
STEP 5
STEP 6
GG (4) HH (1)
FF (2)
EE (2)
DD (7)
EE
FF
HH
GG
DD
B
CDD Hand
ASSEMBLY INSTRUCTIONS
© 2017 TRINITY - 800.985.5506 6
STEP 7
A (1)
II
II (1)
JJ
Lay TOP (A) on a clean surface with holes
facing up.
Screw (8) CONNECTOR SCREWS (JJ) to the
small holes on TOP (A) as shown with
SCREWDRIVER (II).
A
JJ (8)
Insert a DOWEL (CC) into the top of each leg.
Insert (4) DOWELS (CC) to the BACK FRAME
(F).
Make sure the (2) side surfaces of TOP (A) are
extended so that they are flat. With two
people, lift TOP (A) and align the holes on the
underside with the DOWELS (CC) on the
Kitchen Island Frame. Carefully lower TOP (A)
onto the Kitchen Island Frame.
Insert (3) CAM LOCKS (KK) each to LEFT SIDE
FRAME (B) and RIGHT SIDE FRAME (C) with
pointer arrow pointing up, toward the edge.
Insert (2) CAM LOCKS (KK) to BACK FRAME (F).
Use SCREWDRIVER (II) to turn CAM LOCKS (KK)
in clockwise direction until TOP (A) is pulled
tight with the frame.
STEP 8
CC (6) II (1)
KK (8)
II
CC
B
F
C
KK
ASSEMBLY INSTRUCTIONS
Align and press dowels on DRAWER FRONT PANEL
(H) and DRAWER BACK PANEL (I) into blind holes
on DRAWER RIGHT PANEL (K).
Insert (4) DRAWER SCREWS (BB) through the
DRAWER RIGHT PANEL (K) and fasten them tightly
to DRAWER FRONT PANEL (H) and DRAWER BACK
PANEL (I) with SCREWDRIVER (II).
Slide DRAWER BOTTOM PANEL (L) into the
grooves as shown.
STEP 9
Align and press dowels on DRAWER FRONT
PANEL (H) and DRAWER BACK PANEL (I) into
blind holes on DRAWER LEFT PANEL (J).
Insert (4) DRAWER SCREWS (BB) through
the DRAWER LEFT PANEL (J) and tightly
fasten them with the SCREWDRIVER (II).
STEP 10
L (1) BB (4)
K (1) II (1)
I (1)
H (1)
KIIBB
I
H
L
II
BB
J
II (1)BB (4)J (1)
© 2017 TRINITY - 800.985.5506
7
USAGE INSTRUCTIONS
Lift up the Drop Leaf slightly with one hand.
With the other hand, fold in the triangular
supports. Finally let Drop Leaf down gently.
Fold Down Drop Leaf
Pull Drawer out so that it is almost fully
extended. On the LEFT-hand side, pull the
black release lever UP. On the RIGHT-hand
side, push the black release lever DOWN.
While holding the levers as instructed, pull
the Drawer forward until released from the
slides attached to the Kitchen Cart.
Remove Drawer
© 2017 TRINITY - 800.985.5506 8
Align rails on Drawer with rails on the
Kitchen Cart. Push Drawer all the way into
Kitchen Cart.
Install Drawer
Lift up the Drop Leaf with one hand until
surface is flat. With the other hand fold out
the triangular supports by rotating them.
Finally let Drop Leaf down, setting it on the
triangular supports.
Fold Up Drop Leaf
Part Number Description Part Number Description
1) ZSV-01-028-1514 Cam Lock 15) XXX-97-002-0001 Wrench
2) ZSV-01-021-0633 Connector Screw 16) ZSV-99-007-3010 Non-locking Caster
3) LNA-15-004-1904 Drawer Back Panel 17) ZSV-01-007-1035 Washer
4) ZBK-01-025-0425 Drawer Screw 18) LNA-14-032-2032 Left Side Frame
5) LNA-14-011-1404 Drawer Right Panel 19) XSV-02-018-0001 Hanger Stud
6) ZBK-12-006-1350 Slide (frame side) 20) XBR-09-007-0001 Hinge
7) LNA-15-005-2005 Drawer Front 21) LNA-19-004-0600 Drop Leaf Support
8) LNA-14-033-2032 Right Side Frame 22) ZBK-12-005-1350 Slide (drawer side)
9) LNA-03-026-2120 Upper Shelf 23) LNA-14-010-1404 Drawer Left Panel
10) ZSV-99-008-3010 Locking Caster 24) LNA-16-001-1813 Drawer Bottom Panel
11) LNA-03-027-2120 Lower Shelf 25) XNA-01-006-0830 Dowel
12) LNA-15-002-2002 Lower Shelf Frame 26) LNA-15-012-2006 Back Frame
13) ZBK-01-004-0628 Screw 27) XBK-98-002-2525 Pad
14) XXX-97-001-0002 Screwdriver 28) LNA-06-010-4420 Top
SERVICE PARTS LIST –TBFLNA-1406
© 2017 TRINITY - 800.985.5506
9
TRINITY Customer Service provides the following replacement parts:
Table des matières
