FEATURES
The T&To 676 system is equipped with a wide range of
standard features. The only options are:
TalkTo 676 Set, which is available with or without hands-
free operation.
Door Answering, which requires the addition of a Door
Answer Unit, and up to two Door Answer Modules.
Power Fail Transfer, which requires the addition of Power
FailTransfer Units and up to six regular telephones.
X X X
Standard Features
Add-On Conference
The TalkTo 676 system provides 3 party conferencing.
The conference may include 3 TalkTo stations, 2 TalkTo
stations plus 1 Central Office (CO) line, or 1 TalkTo station
plus 2 CO lines.
All Page
Each TalkTo 616 Set user can make a paging announce-
ment, using a single key, through the speakers of all other
Sets. An alert tone precedes the announcement.
Automatic Intercom Path Selection
The TalkTo 616 System has 3 intercom paths, one of
which is selected automatically each time a request for
intercom service is initiated.
Automatic Privacy
Prevents all other users from entering or listening to your
CO or intercom call.
Background Music
When a TalkTo 676 Set is not in use, the user may
choose to listen to music. To enable this feature, dial Jc4.
Music is heard through the Set’s speaker. A customer
provided music source must be connected to the music
interface jack.
Call Hold
Allows a Set user to place a call on hold, go on-hook, or
use the TalkTo Set for another call. This call can be picked
up at any other Set. When the call is placed on hold, the
Ta/kTo Set user receives a visual indication (flashing) for the
lineon hold.
Direct Station Selection
Each TalkTo 676 Set is equipped with 15 direct station
select keys. When a DSS key is pressed the system autc-
matically dials the number of the Set to which the key is
assigned.
Discriminating Ringing
Allows a Set user to distinguish between incoming CO
callsand intercom calls.
Do Not Disturb
Disallows internal calls from ringing at a TalkTo 616 Set.
This feature is enabled when the Set user dials *9. To
return the Set to normal, dial *CS,again. In the DND mode,
the user may use the Set for outgoing calls in the normal
manner. I
Exclusive Hold with Indication
A CO call may be placed on exclusive hold (by pressing
hold key twice). This prohibits the call from being retrieved
from any other Sets. With exclusive hold, the CO line
indicator has a very fast distinctive flash rate.
External Loudspeaker Paging
A connector provides an interface to an external paging
system. If connection is made, all TalkTo 676 Sets are
allowed access to a customer provided external paging
system. After dialing the access code (59) the Set user
hears a short tone indicating that the TalkTo 6 76Set is now
connected to the paging equipment, and the paging an-
nouncement can begin.
Flash/Cancel Key
This key may be programmed as a calibrated flash hook
or as cancel. As flash, each time the key is pressed, a
timed flash will be sent to the CO or PABX, to access
custom calling features. This calibrated flash may be pro-
grammed for 250ms, 500ms IOOOmsor 2000ms.
As cancel, an external call may be terminated by press-
ing the cancel key without replacing the handset in the
cradle.
Flexible Ringing Assignment
Each CO line may be programmed to ring all TalkTo 676
Sets, or selected Sets.
Hold Recall
A Set user that has placed a call on hold, will receive an
audible signal (from the Set’s speaker), after a program-
mable interval (1, 2, 3 or unlimited minutes).
I-Hold Indication
The indicator for the CO line placed on hold at your Set
will have a faster flash rate to those linesheld at other Sets.
My-Line Indication
Indication that allows the user to distinguish between the
user’s line and other lines. The indicator for the CO line in
use gives a winking flash.
