Trieste TRV602IX Manuel technique

Dear User,

we are sincerely grateful to you for purchasing one of our products.

We are sure that the appliance modern, functional and easy to use, built with the finest materials

and components will satisfy all your needs.

We would ask that you read the instructions within this booklet very carefully so as to enable you

to obtain quality results from the outsets.

The appliance must be installed only by a qualified electrician in compliance with the

instructions provided. The manufacturer declines all responsability for improper installation.

USE, INSTALLATION AND MAINTENANCE

INST UCTIONS FO ELECT ICAL

BUILT-IN HOT PLATES

The manufacturer is not responsible for any transcription errors or misprints contained in this handbook and,

furthermore, reserves the right to make any modification on the products, which might be deemed

necessary or usefull, this being in the user’s interest, without altering their basic operating or safety

features. This cook top was designed to be used exclusively as a cooking appliance: any other

use (such as heating rooms) is to be considered improper and dangerous.

C D.: 120349EUR - 13.04.2011

MODELS: T V602IX - T V602WH

1 Radiant electric heating element Ø 145 mm 1200 W (even if “Hi-light”)

2 Radiant electric heating element Ø 180 mm 1700 W (even if “Hi-light”)

9 Switch for plate n. 1 front

14 Switch for plate n. 2 bach

DESC IPTION OF THE CE AMIC COOKTOP

1) CE AMIC COOKTOP

The hot plates are equipped with 2 radiant heating

elements with different powers and diameters.

Cooking zones are aesily identifiables thanks to the

circles (see illustration in description) on the top;

relative powers are listed in the scheme n. 1.

n the frontal panel, close to each knob, has been

silk-screened a scheme where is indicated to which

cooking zone the knob refers (fig. 1).

In some particular models the scheme annexes a

light indicator that turns on when the cooking zone

temperature is above 60° C (fig. 1).

The indicator will turn off only when the temperature

of the cooking zone will be below the value: this is

the reason why we call it residual heat indicator.

Some other models they have only one indicator

(see description paragraph).

Connection of electric heating elements

Heating elements are controlled by energy

regulators with 12 positions that permit to obtain a

big range of different temperatures. In Scheme 1,

by way of information, we give instructions to obtain

different cooking levels.

To connect the heating elements is necessary to

turn clockwise or anticlockwise the relative knob.

How to use the cooking zones

Heating takes place only in the inside part of the

circles drawn on the special glass. The circles have

to be wholly covered by the pots.

USE

FIG. 1

USE

SCHEME 1

1 145 Radiant 1200 1 1

(even if

“Hi-light”)

2 180 Radiant 1700 2 1 - 4

(even if

“Hi-light”)

Zone Diameter Heating Power Commutators Energy

n° in mm. elements W regulators

6 12

5 10 - 12

To heat foods,

thaw deep-frozen

foods, to cook

fruits and pulses.

To melt butter,

chocolate and

else.

To fry with oil and

to heat big

quantities of water.

To cook roast of

meat, fish; to cook

steaks and eggs.

To cook meat, fish,

pulses with sauce.

To heat small

quantities of liquid

and to keep dishes

warm.

Power and dimensions of the

cooking zones

Position for regulation

of the knobs Possible

cookings

4 8 - 10

3 4 - 8

WARNINGS:

for a correct use, please look at fig. 2 and remind:

- switch on the electricity only after having placed

the pot on the cooking zone.

- Use pots and pans with flat solid bottoms.

- Use pots with the same diameter of the cooking

zones.

- Dry the bottom of the pot before put in on the

cooking zones.

- Do not scrape the pot against the glass so to

not damage it.

- During the use of the cooking zones, please,

keep the children away from the hot plates.

Make sure that the handles of the pots are

placed in the right way towards the interior. Be

aware that overheated fats and oils may become

inflamed.

- Cooking zones after using remain warm; don’t

leave objects, don’t lean your hands so to avoid

burns, till the indicator light is off.

- If the glass cracks, please, disconnect the

appliance.

- Don’t use plastic pots or alluminium sheets.

- Don’t use hob as a supplementary surface.

- Don’t fix for long the halogen lights.

- The machine must not be used by people

(including children) with impaired mental or

physical capacities, or without experience of

using electrical devices, unless supervised or

instructed by an expert adult responsible for

their care and safety. Children should not be

allowed to play with the equipment.

- Do not attempt to change the technical

characteristics of the product because it can

be dangerous.

- If you should not to use this appliance any

more (or replace an old model), before

disposing of it, make it inoperative in

conformity with current law on the protection

of health and the prevention of environmental

pollution by making its dangerous parts

harmless, especially for children who might

play on an abandoned appliance.

USE

FIG. 2

CLEANING

Before any cleaning operation, disconnect the

appliance from the electric circuit.

2) CE AMIC COOKTOP

If you want to preserve the surface clean and bright,

we recommend you to use a silicone conditioner.

The use of this conditioners, prior to jam-making,

helps to protect the surface of the hob.

It is very important to clean the surface soon after

every use, when the glass is still tepid.

Do not use metallic sponges, powder abrasives or

corrosive sprays.

Depending on the dirty level we recommend:

- slights stains: it is enought the use of a moist clean

rag.

- Burnt or soiling may be removed with a special

razor scraper (fig. 3); be aware that the razor

can cause wounds.

- Marks of liquid, overflowed from the pot, can be

removed using vinegar or lemon.

-Pay attention to not let fall sugar or element with

sugar. In this case turn the switch off and clean

the surface with hot water and the razor blade

scraper.

- After a period of time may appear metal reflex and

scratches (fig. 4) due to the wrong cleaning and

the wrong use of the pots. The scratches are

difficultly removable, but they do not compromise

the good working of the hob.

- Don’t use steam jets for the equipment cleaning.

FIG. 3 FIG. 4

INSTALLATION

TECHNICA INSTRUCTIONS

FOR THE INSTA ER

Installation, transformations and maintenances

below listed, may only be carried out by a

competent technician.

The appliance must be correctly installed in

conformity with current law and the

manufacturer's instructions.

A wrong installation may provoke damages to

persons, animals or things, for which the builder

can not be responsible.

3) INSE TING THE CE AMIC COOKTOP

After having cleared out all the packing

components, make sure of the integrity of the

appliance.

Please keep children away from all packing

elements ( carton, polystyrene, nails...).

Make a cutout in the worktop, according to the

dimensions indicated in fig. 5; make sure that will be

respected the critical dimensions of the space in

which the appliance has to be installed (fig. 6).

4) FIXING THE CE AMIC COOKTOP

A special sealing strip underneath the hob for damage.

Make sure it is correctly positioned with no gaps; it

avoids any water infiltration. To fix in the right way

the strip, please, respect the following instructions:

- fix the hooks in the relative accomodations of the body

(fig. 7).

- verturn the hob, take the seal strips off from

their support, having care that the transparent

protection remains attached to the seal. Correctly

place the seal “E” (fig. 8) under the hob edge, so

that the external side of the seal fits together with

the external perimentrical edge of the hob. The

ends of the strip must fit together without

overlapping.

- Stick the seal to the hotplate uniformly, pressing

it with fingers.

- Take the protective paper strip of the seal off,

place the hotplate in the opening made in the

table top, and lock it with the special screws “F”

(fig. 9).

- In order to avoid accidental touch with the

overheating bottom of the hob, during the

working, is necessary to put a wooden insert,

fixed by screws, at a minimum distance of 60

mm from the top (see fig. 5).

WARNINGS:

be aware that the glue that join the laminated

plastic to the furniture, has to resist to

temperature not below 150 °C, to avoid the

unstuck of the panelling.

The rear wall, adjacent and surrounding surfaces

must therefore be able to withstand an

overtemperature of 65 K.

COMP Y WITH THE

DIMENSIONS (mm)

FIG. 7 FIG. 8 FIG. 9

FIG. 5 FIG. 6

A B C D E

2E 282 482 59 59 100 min.

CAUTION:

do not place the glass directly on the unit.

The bottom of the hob must rest on the unit.

INSTALLATION

5) ELECT ICAL CONNECTION

The electrical connection has to be done in

accordance with all electrical and installation

requirements of the Regulation.

Before proceeding with the connection, please,

verify that:

- the voltage matches the value shown on the

specification plate and the section of the wires of

the electrical system can support the load, which

is also indicated on the specification plate.

- the power of the electrical system and the power

of the outlets is adequate to the maximum power

of the appliance (see the identification label in the

lower part of the body).

- The outelets and all the electrical system has an

efficient connection to the “earth” according with

the Regulation. We disclaim all responsabilities for

not observing such points.

- If the appliance is not equipped with an input

cable, connect to the clump with an adequate

section cable (see scheme paragraph 8) keeping

the “earth” conductor longer than “live” ones,

following the scheme of fig. 10.

When the connection to the input system has

been done through a outlet:

- apply to the input cable “C”, if unprovided, a

normalized plug adequate to the load indicated in

the identification label. Connect the cables

according to the scheme of fig. 10, making sure to

respect the undermentioned respondences:

letter (live) = cable brown colour;

letter N (neutral) = cable blue colour;

symbol (earth) = cable green - yellow colour.

- The input cable has to be located so that never

reach the over temperature of 75 K.

- Please do not use in the connection any

reduction, adaptation that may provoke a false

contact with following dangerous overheatings.

- The outlet must be accessible after the built-in.

When the connection has been done directly to

the input system:

- interpose between the appliance and the system

an onnipolar switch, adequate to the load of the

appliance, with a minimum nose between the

contacts of 3 mm.

- Keep in mind that the “earth” cable does not have

to be interrupted by the switch.

- In an alternative solution the electrical connection

can also be protected by a differential switch with

high sensitivity.

We recommend to fix the earth coloured cable to an

appropriate earth installation.

Before performing any service on the electrical

part of the appliance, it must absolutely be

disconnected from the electrical network.

WARNINGS:

all our products are projected and built

according with the European Norms EN 60 335-1,

EN 60 335-2-6 and EN 60 335-2-102 and relative

amendments.

The appliance has been produced according

with the European Directives:

- CEE 2004/108/CE concerning the

compatibility electromagnetic.

- CEE 2006/95 concerning the electrical

security.

IMPORTANT: the appliance must be

installed following the manufacturer's

instructions. The manufacturer will not be

liable for injury to persons or animals or

property damage caused by an incorrect

installation.

If the installation requires modifications to

the home's electrical system or if the

socket is incompatible with the appliance's

plug, have changes or replacements

performed by professionally-qualified

person. In particular, this person must also

make sure that the section of the wires of

the socket is suitable for the power

absorbed by the appliance.

FIG. 10

Denominations W

Heating element Ø mm 145 radiant (even if “Hi-light) 1200

Heating element Ø mm 180 radiant (even if “Hi-light) 1700

POWE OF ELECT ICAL COMPONENTS DENOMINATIONS W

MAINTENANCE

Before doing any action, disconnect the

appliance from the input power.

6) COMPONENTS SUBSTITUTION

To replace the components lodged in the internal

part, is necessary to take the appliance up from the

furniture, overturn it, loosen the screws and take

away the bottom.

After these actions is possible to work on the plates,

commutators, clamps and input cable.

In case of substitution of the input cable, the

installer must keep the “earth” conductor longer

than “live” ones, and must respect the cautions in

paragraph “electrical connection”.

To reassemble the appliance repeat the inverse

process.

7) TECHNICAL CHA ACTE ISTICS

OF THE ELECT ICAL COMPONENTS

To facilitate the job of the installer we present a

scheme with the characteristics of the components.

TYPE AND SECTION OF THE POWE CABLE

(*) keeping in mind the contemporaneousness factor

3 X 1.5 mm2(*)

Cable type

Rubber

H05 RR-F

Single phase power 230 - 240 V~

WARNING:

MAINTENANCE MUST ON Y BE

PERFORMED BY AUTHORISED PERSONS.

TECHNICAL DATA

2 HEATING ELEMENTS

Voltage 230 - 240 V~

Frequency 50/60 Hz

Tot. Rating 2900 W

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Trieste plaque de cuisson

Trieste

Trieste built-in cooktops Manuel utilisateur

Manuels plaque de cuisson populaires d'autres marques

Bonnet

Bonnet OPTIMUM 700 Manuel du propriétaire

Jenn-Air

Jenn-Air JGCP430 Manuel utilisateur

Frigidaire

Frigidaire FES367FCC Guide de démarrage rapide

Ztove

Ztove EZ2 DUO Manuel utilisateur

Kleenmaid

Kleenmaid cooking GCTK9011 Guide d'installation

Casselin

Casselin CSASRE24 Manuel utilisateur

Jenn-Air

Jenn-Air JGC2536EB00 Manuel utilisateur

Waldorf

Waldorf RN8603E-B Mode d’emploi

Whirlpool

Whirlpool SMP658CNEIXL Manuel utilisateur

Wolf

Wolf CI243C/B Manuel utilisateur

Fulgor Milano

Fulgor Milano F5PGK305S1 Manuel utilisateur

GE JP389 Manuel utilisateur

Wells

Wells WV-2HFG Manuel utilisateur

IKEA

IKEA Lagan HGA4K Manuel utilisateur

Samsung

Samsung NA36N9755 Manuel utilisateur

Miele

Miele KM 404 Manuel utilisateur

Lacor

Lacor 69562 Fiche technique

Keating Of Chicago

Keating Of Chicago MG-2 Manuel utilisateur