TREX M50 Manuel utilisateur

Motorcycle Scissor Lift M50

User Manual

[Revision 1.0 February 2018]

READ THIS MANUAL CAREFULLY BEFORE USE –FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY

DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by

this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.

Motorcycle Scissor Lift M50

Safety

Ensure that you read, understand and apply the safety instructions and warnings before use. Failure to heed

these instructions may result in property damage and/or personal injury.

•NEVER exceed the maximum load capacity of 500kg (1100lb).

•The tool is for domestic use only.

•Do NOT use the tool for any purpose it is not designed to perform.

•Keep children and unauthorised persons away from the work area when the tool is in use.

•Wear ANSI approved safety goggles, suitable protective gloves and steel-capped safety boots when

operating the equipment.

•Only use the equipment on stable, flat and level surfaces.

•Keep the platform clean and dry.

•Do NOT work under the platform. Keep hands and body parts away from the table when it is elevated.

•Do NOT allow untrained persons to operate the equipment.

•Do NOT make any modifications to equipment.

•Do NOT expose the lift to moisture.

•ALWAYS check the lift before use.

•ALWAYS raise and lower the platform slowly and steadily.

•Where possible, secure the vehicle to prevent it tilting or falling.

•Do NOT work under a lifted vehicle.

•Before each use check all parts. If any part of the tool is damaged or suspect, do NOT use the

equipment –have it inspected by an authorised service centre.

•Always ensure that the tool is correctly and appropriately used.

•Do NOT modify the tool in any way. Doing so may damage the tool or render it as unusable and will void

any warranty.

•Apply common-sense and keep safety a priority when using the tool. Any damage to property or

personal injury is the responsibility of the operator.

Motorcycle Scissor Lift M50

Table of Contents

Safety.............................................................................................................................................2

Operation.......................................................................................................................................4

Care and Maintenance..................................................................................................................5

Specifications ...............................................................................................................................5

Motorcycle Scissor Lift M50

Operation

1. Place the tool in the desired position (generally, underneath the vehicle). Note that the base has

mounting holes for permanent attachment the floor using suitable fasteners (not included).

2. Adjust the position of the stirrups (A) so that they are aligned with a suitable part of the vehicle for

jacking (for example, lower frame tubes or engine). The stirrups can be moved along the platform –lock

the stirrups in position using the bolts on either side of the stirrup. The top part of the stirrups can be

rotated and can also be adjusted in height.

3. Place the spanner (B) on the jacking screw (C) and rotate to raise / lower the platform –rotate right

(clockwise) to raise; rotate left (anti-clockwise) to lower. Lift the vehicle slowly and steadily. It is

recommended to secure the vehicle, if possible.

When finished, slowly and steadily lower the platform until the tool can be safely removed from under the

vehicle.

A

B

C

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

Motorcycle Scissor Lift M50

Care and Maintenance

•Store the tool in the lowest position, in a dry location, and out of the reach of children.

•Keep the tool clean and remove any oil or grease, dirt etc from the platform after each use.

•Regularly lubricate the pivot points with oil and apply grease to the jacking screw.

Specifications

Capacity

500kg / 1100 LBS

Minimum Height

95mm

Maximum Height

400mm

Platform Size

450 x 150mm

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX `

TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX TREX

Motorcycle Scissor Lift M50

Some experts believe the incorrect or prolonged use of almost any product could cause serious

injury or death. For information that may reduce your risk of serious injury or death, consult the

points below and additionally, the information available at www.datastreamserver.com/safety

•Consult all documentation, packaging and product

labelling before use. Note that some products feature

online documentation which should be printed and kept

with the product.

•Check product for loose / broken / damaged / missing

parts, wear or leaks (if applicable) before each use.

Never use a product with loose / broken / damaged /

missing parts, wear or leaks (if applicable).

•Products must be inspected and serviced (if applicable)

by a qualified specialist every 6 months assuming

average residential use by a person of average weight

and strength, above average technical aptitude, on a

property matching average metropolitan specification.

Intended use outside these guidelines could indicate

the product is not suitable for intended use or may

require more regular inspection or servicing.

•Ensure all possible users of the product have

completed an industry recognized training course

before being given access to the product.

•The product has been supplied by a general merchandise retailer that

may not be familiar with your specific application or your description

of the application. Be sure to attain third-party approval for your

application from a qualified specialist before use regardless of prior

assurances by the retailer or its representatives.

•This product is not intended for use where fail-safe operation is

required. As with any product (take an automobile, aircraft, computer

or ball point pen for example), there is always a small chance of

technical issues that needs to be repaired or may require replacement

of the product or a part. If the possibility of such failure and the

associated time it takes to rectify could in any situation inconvenience

the user, business or employee then the product is not suitable for

your requirements. This product is not for use where incorrect

operation or a failure of any kind, including but not limited to a

condition requiring product return, replacement, service by a

technician or replacement of parts could cause a financial loss, loss of

employee time or an inconvenience requiring compensation.

•If this item has been purchased in error after considering the points

above, simply contact the retailer directly for details of their returns

policy, if required.

diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

TREX M50 Manuel utilisateur

Manuels Matériel de construction populaires d'autres marques