•Remove the mains plug from the wall socket outlet,…
…if a disturbance occurs
…after use
…if the citrus juicer is out of use for a prolonged period of time
…before cleaning the citrus juicer
…before removing and inserting the pressing cones.
Always pull the plug, not the cord.
Caution-material damage
•If you apply too much pressure to the cone while juicing, the motor may
seize.
•Keep the connection cord away from sources of heat.
Important information for placing the juicer
•Place the juicer on a level surface that will not be harmed by splashes of
juice as splashing cannot always be avoided. The surface should be easy
to clean.
•Do not stand the juicer on hot surfaces, such as hotplates or near naked
flames.
•Your citrus juicer is equipped with suction feel. The suction feel will adhere
to any smooth surface. For them to adhere well, the surface must be flat
and also free of dust or grease. The suction feet cannot adhere to a
textured surface. Slightly moisten the suction feel before you press them
onto the surface.
•Do not fix the suction feel to sensitive surfaces. Some paints or synthetic
coatings may react adversely with the material of the suction feel and
soften them .This could cause them to leave marks.
•Never use abrasive or caustic cleaning products, as these might damage
the surfaces.
2
