TRENDnet TEW-310APB Manuel utilisateur

Connecting Access Point to your Network

Installation

1. Connect the power adapter to the DC Jack of Access Point (AP) and plug to

a power outlet. The Power LED will be lightened as operation.

2. Insert one end of the Straight-Through Ethernet cable to the Ethernet port

onto AP, and the other end of the cable to an Ethernet Broadband Router or

Switch. The Router or Switch must be connected to the computer for setting.

The default IP address is 192.168.1.1 with a subnet mask of 255.255.255.0

You will need to assign your computer a Static IP within the same range as the

Wireless Access Point's IP address for the purpose of configuration. The Link

LED will light on to indicate a proper Ethernet connection.

See the Manual on the CD-ROM if you need assistance in assigning a Static IP

address for your network adapter.

Note! When connecting Access Point to an Ethernet adapter in a computer, use

a crossover Ethernet cable.

3. Insert 22 Mbps driver CD into the CD-ROM

If the Autorun function on your computer does not automatically start,

proceed to the step below:

Go to Start > run > type "D:\Autorun.exe", then click “OK”. "D:\” is your CD-

ROM device where the driver CD inserted to.

4. Select "Access Point".

5. Click "Install" button.

6. Click "Next" button.

7. Click "Next" to install the Utility program in the default folder.

2.4GHz 22 Mbps Wireless Network Access Point

Quick Installation Guide

8. Click "Finish" button.

9. Click "Exit" to close installation Wizard.

Configuration

1. Double Click the icon of “22M AP Utility” on your desktop.

2. The window of "Link Information" shows the current status of AP.

3. Select" AP Settings", you can change the ESSID, Channel and AP Name

to match your wireless network.

4. Select "IP Settings". The default setting is "The Fixed IP Address" and IP

Address is 192.168.1.1 with a subnet mask of 255.255.255.0. You should

select "DHCP Client" if the AP is connected to DHCP Server.

5. Select "WEP Settings". You can set the Wired Equivalent Privacy (WEP)

encryption by clicking the "Data Encryption". Then change the "Key

Format" to "Hex" or "ASC II" format. Select the "Key Length" with 64bits,

128bits or 256 bits, and click "Apply" to finish the configuration steps.

6.Select 802.1X Settings,

-Enable 802.1x security by selecting “Enable”.

-Select the Encryption Key Length Size ranging from 64 to 256 Bits

that you would like to use.

-Select the Lifetime of the Encryption Key from 5 Minutes to 1 Day. As

soon as the lifetime of the Encryption Key is over, the Encryption Key

will be renewed by the Radius server. Note! WEP function has to be

disable when TLS is on, however it has to be enable when MD5 is on.

-Enter the IP address of and the Port used by the Primary Radius

Server

-Enter the Shared Secret, which is used by the Radius Server.

-Enter the IP address of, Port and Shared Secret used by the

Secondary Radius Server.

-Click “Apply” button for the 802.1x settings saved

Note!As soon as 802.1x security is enabled, all the wireless client stations that

are connected to the Access Point currently will be disconnected. The wireless

clients must be configured manually to authenticate themselves with the Radius

server to be reconnected.

7. For advanced settings, back to "Link Information" page and double click

on the AP name which was shown from the "Available AP" window, or

open the Web Browser and type in "192.168.1.1". Please use "admin" as

the User Name and Password.

Autres manuels pour TEW-310APB

4

Table des matières

Autres manuels TRENDnet Point d'accès sans fil

TRENDnet

TRENDnet TEW-676APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-230APB Manuel utilisateur

TRENDnet

TRENDnet TEW-638APB Manuel utilisateur

TRENDnet

TRENDnet TEW-638AP Manuel utilisateur

TRENDnet

TRENDnet TEW-690AP Manuel utilisateur

TRENDnet

TRENDnet TEW-453APB - 108Mbps Wireless Super G HotSpot Access... Manuel utilisateur

TRENDnet

TRENDnet TEW-410APB Manuel utilisateur

TRENDnet

TRENDnet TEW-212APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-450APB - Wireless Super G Access Point Manuel utilisateur

TRENDnet

TRENDnet TEW-413APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-821DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-815DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-455APBO - 9dBi High Power Wireless Outdoor PoE Access... Manuel utilisateur

TRENDnet

TRENDnet TEW-310APB Manuel utilisateur

TRENDnet

TRENDnet TEW-921DAP Manuel utilisateur

TRENDnet

TRENDnet 14dBi Manuel utilisateur

TRENDnet

TRENDnet TEW-450APB - Wireless Super G Access Point Guide d'installation

TRENDnet

TRENDnet TEW-638PAP Manuel utilisateur

TRENDnet

TRENDnet N300 TEW-739APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-753DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-430APB - Wireless Access Point Manuel utilisateur

TRENDnet

TRENDnet TEW-455APBO - 9dBi High Power Wireless Outdoor PoE Access... Manuel utilisateur

TRENDnet

TRENDnet TEW-740APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-510APB Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur