TRENDnet TV-IP422 Manuel utilisateur
TV-IP422
TV-IP422W
H/W: A1.0R
Quick Installation Guide
Table of Contents
English ...................................................................................................... 1
1
4
3
9
1. Before You Start
2. Hardware Installation .........................................................................
3. Configure the Internet Camera ..........................................................
.................................................................................
Table of Contents
Version 02.17.2009
Troubleshooting ........................................................................................
System Requirements
Package Contents
1. Before You Start
English
1
?
?Utility CD-ROM
?
?1 x 2dBi Detachable Antenna
(
?GPIO Adapter
?
?Mounting Kit
?AC Power Adapter (12V, 1.5A)
TV-IP422 / TV-IP422W
Quick Installation Guide
TV-IP422W)
RJ-45 Cable
?
?Wireless router or access point (TV-IP422W)
?
?
?
?
?
10/100Mbps Ethernet
CPU: 1GHz processor or above
Memory: 256MB RAM or above / 512MB RAM or above (Windows Vista)
Windows 2000/XP/Vista
VGA Resolution: 800 x 600 or above
Web Brower: Internet Explorer (6.0 or higher)
Application
English
2
Family Monitoring
(TV-IP422W)
Business Monitoring
(TV-IP422)
Property Monitoring
(TV-IP422)
Cable/DSL
Modem
Internet
Home Monitoring
(TV-IP422W)
Wireless N Gigabit Router
(TEW-633GR)
Family Monitoring
(TV-IP422)
Business Monitoring
(TV-IP422W)
Property Monitoring
(TV-IP422W)
Cable/DSL
Modem
Internet
Home Monitoring
(TV-IP422)
Wireless N Gigabit Router
(TEW-633GR)
2. Hardware Installation
English
3
3. Connect the AC Power Adapter to
the Internet Camera Server and
then to a power outlet.
2. Connect a RJ-45 network cable
from a Switch/Router to the
Ethernet port of the Internet
Camera Server.
1. Attach the Antenna. (TV-IP422W)
4. Verify the Power and Link LEDs
are on.
English
4
3. Configure the Internet Camera
Note:
1. It is recommended that you configure the Internet Camera from a wired
computer.
2. If you would like to use SecurView software, please refer to the User's Guide
on the CD for more information.
2. Follow the IPSetup Setup Wizard
instructions and then click Next.
3. Click Close.
4. Go to Start -> Programs ->
TRENDnet -> IPSetup and click
IPSetup.
1. Insert the Utility CD-ROM into your
CD-ROM drive and then click IP
Setup.
English
5
5. Select the camera server and click
Change IP.
6. Configure the desired IP address
to be in the same subnet as your
network, type in the Administrator
ID and Password and click
Change.
By default:
ID: admin
Password: admin
7. Click OK and wait 30 seconds.
8. Click OK.
Note: By default, the IP setting on the TV-IP422/TV-IP422W is set to DHCP.
Please skip to step 9. If you want to give the TV-IP422/TV-IP422W static IP
address, continue on to step 5.
11. Right click and select Install
ActiveX Control.
12. Click Install.
English
6
10. Enter the User name and
Password, and then click OK.
By default:
User Name: admin
Password: admin
Note: If you have the TV-IP422W, continue on to step 13. If you have the
TV-IP422, skip to step 16.
9. Double click the camera server to
access the browser configuration.
15. Disconnect the RJ-45 cable and
unplug the power. Then plug the
power back in (TV-IP422W).
English
7
14. Click Site Survey. Select your
wireless network. If encryption
is enabled, select the proper
Authentication type, enter the
Pre-Shared Key and then click
apply. (Example shows
WPA2-PSK. If your wireless
network does not support WPA,
select open or shared instead.
Contact your network
administrator for more
information) (TV-IP422W only).
16. Verify the Power and Link LEDs
are on.
Note: The TV-IP422W will not work wirelessly until you disconnect the Ethernet
cable from the back of the camera.
13. Click Setup, Network and then
click Wireless.
(TV-IP422W only).
17. Click Live View.
English
8
Your installation is now complete.
Note: For detailed information regarding the TV-IP422/ 422W configuration
and advanced settings, please refer to the Troubleshooting section, User's Guide
on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com.
TV-IP
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
Autres manuels pour TV-IP422
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels TRENDnet Caméra de sécurité
TRENDnet
TRENDnet TV-IP312 Manuel utilisateur
TRENDnet
TRENDnet TV-IP310PI Feuille d'instructions
TRENDnet
TRENDnet TV-IP400 Manuel utilisateur
TRENDnet
TRENDnet TV-IP252P - SecurView PoE Dome Internet Camera... Manuel utilisateur
TRENDnet
TRENDnet TV-IP300 Manuel utilisateur
TRENDnet
TRENDnet TV-IP201 Manuel utilisateur
TRENDnet
TRENDnet TV?IP450PI Manuel utilisateur
TRENDnet
TRENDnet TV-IP311PI Manuel utilisateur
TRENDnet
TRENDnet TV-IP422 Manuel utilisateur
TRENDnet
TRENDnet TV-IP612WN Manuel utilisateur
TRENDnet
TRENDnet TV-IP651W Manuel utilisateur
TRENDnet
TRENDnet TV-IP201P Manuel utilisateur
TRENDnet
TRENDnet TV-IP313PI Manuel utilisateur
TRENDnet
TRENDnet TV-IP400 Mode d’emploi
TRENDnet
TRENDnet TV-IR500 Manuel utilisateur
TRENDnet
TRENDnet TV-IP262PI Manuel utilisateur
TRENDnet
TRENDnet TV-IP110WN Manuel utilisateur
TRENDnet
TRENDnet TV-IP301W Manuel utilisateur
TRENDnet
TRENDnet TV-IP201 Manuel utilisateur
TRENDnet
TRENDnet TV-IP312PI Manuel utilisateur
