TRENDnet TU2-ET100 Manuel utilisateur

TU2-ET100

Quick Installation Guide

Table of Contents

Version 05.24.2010

English 1

1. Before You Start

2. How to Install 2

Troubleshooting 4

1. Before You Start

•CD-ROM drive

•USB port: 2.0 or 1.1

Package Contents

System Requirements

Supported Operating Systems CPU Memory

Windows 7 (32/64-bit)

Windows Vista (32/64-bit)

Windows XP (32/64-bit) /

2000 / ME / 98SE

Mac OS X (10.5)

Mac OS X (10.6)

Mac OS X (10.4)

Mac OS X (10.1-10.3)

1GHz or above

800MHz or above

300MHz or above

867MHz or above

Intel Processor

333MHz or above

300MHz or above

1GB RAM or above

512MB RAM or above

256MB RAM or above

512MB RAM or above

1GB RAM or above

• TU2-ET100

•CD-ROM (Driver)

•Multi-Language Quick Installation Guide

256MB RAM or above

2. How to Install

Note:

1. For Windows 98SE and Me and Mac OS X driver installation, refer to the user

guide on the Driver CD-ROM.

2. Do not insert the TU2-ET100 until prompted to.

Windows 7 / Vista / XP / 2000

1. Insert the Driver CD-ROM into your CD-ROM

drive.

2. Click RunAutorun.exe (Windows 7/Vista only).

3. Click Install Driver.

4. Follow the InstallShield Wizard and then click

Finish.

6. Remove the driver CD-ROM from your

computer's CD-ROM drive.

5. Click Exit.

8. Drivers will install automatically.

7. Connect theAdapter to an available USB port

of your computer.

9. Connect a RJ-45 cable from theAdapter to a

Switch, Router, or Cable/DSLModem.

Your Installation is complete.

I inserted the Driver CD-ROM into my computer's CD-ROM Drive and the

installation menu does not appear automatically. What should I do?

For Windows 7, if the installation menu does not appear automatically, click on

the Windows Icon on the bottom left hand corner of the screen, click the

“Search programs and files” box, and type D:\autorun.exe, where “D” in

“D:\autorun.exe” is the letter assigned to your CD-ROM Drive, and then press

the ENTER key on your keyboard

2. For Windows Vista, if the installation menu does not appear automatically, click

Start, click the Start Search box, and type D:\autorun.exe where "D" in

"D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press

the ENTER key on your keyboard.

3. For Windows 2000/XP, if the installation menu does not appear automatically,

click Start, click Run, and type D:\autorun.exe where "D" in "D:\autorun.exe" is

the letter assigned to your CD-ROM Drive, and then press the ENTER key on

your keyboard.

2. Can I connect or disconnect the TU2-ET100 while the computer is on?

Yes, you can connect or disconnect TU2-ET100 while the computer is on

because the USB interface is Plug-and-Play compliant and hot-pluggable.

3. Windows is unable to recognize my hardware. What should I do?

1. Make sure your computer meets the minimum requirements as specified in

Section 1 of this Quick Installation Guide.

2. Try plugging the adapter into a different USB port.

4. Windows recognizes my new hardware, but I'm unable to connect to my

network. What should I do?

1. Verify that the RJ-45 Ethernet cable is securely connected from your switch or

router to your adapter.

2. Verify that the LEDs on your adapter are lit.

3. Verify that the TCP/IP settings are set to Obtain an IPaddress automatically.

5. How do I install this device on Windows 98SE, ME and Mac OS X?

Refer to the User Guide included on the Driver CD-ROM for installation

instructions.

If you still encounter problems or have any questions regarding the TU2-ET100, please

contact TRENDnet'sTechnical Support Department.

Troubleshooting

Autres manuels pour TU2-ET100

Autres manuels TRENDnet Adaptateur

TRENDnet

TRENDnet TPE-101I Mode d’emploi

TRENDnet

TRENDnet TBW-101UB Manuel utilisateur

TRENDnet

TRENDnet TPL-302E Manuel utilisateur

TRENDnet

TRENDnet TA-CC - DATA SHEETS Manuel utilisateur

TRENDnet

TRENDnet TPL-407E Manuel utilisateur

TRENDnet

TRENDnet TEW-687GA Manuel utilisateur

TRENDnet

TRENDnet TEW-624UB Manuel utilisateur

TRENDnet

TRENDnet TEW-644UB Manuel utilisateur

TRENDnet

TRENDnet TEW-808UBM Manuel utilisateur

TRENDnet

TRENDnet TPL-307E Manuel utilisateur

TRENDnet

TRENDnet TE-16PNP Manuel utilisateur

TRENDnet

TRENDnet TPL-406E Manuel utilisateur

TRENDnet

TRENDnet TEW-624UB Manuel utilisateur

TRENDnet

TRENDnet TPL-302E2K - Powerline AV Fast EN Adapter Manuel utilisateur

TRENDnet

TRENDnet TE-CF10 Manuel utilisateur

TRENDnet

TRENDnet TPL-308E Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

TRENDnet

TRENDnet TBW-105UB Manuel utilisateur

TRENDnet

TRENDnet TPL-401E Manuel utilisateur

TRENDnet

TRENDnet TU-ET10 Manuel utilisateur

TRENDnet

TRENDnet TEW-648UB - 150Mbps Mini Wireless N USB 2.0... Manuel utilisateur

TRENDnet

TRENDnet TEW-421PC Manuel utilisateur

TRENDnet

TRENDnet Powerline 1300 AV2 Adapter with Built-in... Manuel utilisateur

TRENDnet

TRENDnet HotFlash TEW-429UF Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur