TRENDnet TU2-ET100 Manuel utilisateur

FCC Warning

This equipment has been tested and found to comply with the

regulations for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency

energy and, if it’s not installed and used in accordance with

this user’s guide, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the

user will be required to correct the interference at his own

expense.

CE Mark Warning

This is a Class B product. In a domestic environment, this

product may cause radio interference, in which case the user

may be required to take adequate measures.

VCCI Class B Compliance (Japan)

This is a product of VCCI Class B Compliance

P/N: 1907SHUN2105001

Table of Contents

INTRODUCTION............................................4

ABOUT THE USB 2.0 TO 10/100MBPS FAST

ETHERNET ADAPTER...................................... 4

PRODUCT FEATURES ...................................... 4

INSTALLATION .............................................5

ASPECT DESCRIPTION .................................... 5

HARDWARE &SOFTWARE INSTALLATION....... 5

LED INDICATORS........................................... 6

USB CONNECTOR PIN ASSIGNMENT .............. 7

SPECIFICATIONS..........................................8

INTRODUCTION

Thanks for purchasing of the USB 2.0 to

10/100Mbps Fast Ethernet Adapter. This Adapter

will allow your computer to connect to 10Mbps

Ethernet or 100Mbps Fast Ethernet Network

through USB 2.0 interface.

About the USB 2.0 to 10/100Mbps Fast

Ethernet Adapter

The USB 2.0 to 10/100Mbps Fast Ethernet

Adapter allows user to connect up to 10Mbps

Ethernet or 100Mbps Fast Ethernet Network

through their USB 2.0 ready PC.

The USB 2.0 to 10/100Mbps Fast Ethernet

Adapter is designed to provide quicker and easier

access to a type ‘A’ plug for connecting to USB

2.0 Hub or the PC’s USB 2.0 port, the RJ-45

Ethernet Port for connecting to 10Mbps Ethernet

or 100Mbps Fast Ethernet Network.

Product Features

Compliant with USB specification 1.0, 1.1

and 2.0

IEEE 802.3 10BASE-T Ethernet, IEEE

802.3u 100BASE-TX specification

ANSI/IEEE 802.3 Auto-negotiation

Plug-and-Play

Supports Bus-power mode. No external

power needed.

One dual color LED indicator for Ethernet

port status.

INSTALLATION

The USB 2.0 to 10/100Mbps Fast Ethernet

Adapter is designed to be simple and easy

install.

Aspect Description

Hardware & Software Installation

Step-1: Make sure the PC is power on and

running at Windows Operating System

Step-2: Connect to Adapter to a 10Mbps,

100Mbps or 10/100Mbps Hub/Switch through

RJ-45 Ethernet Port.

Step-3: Insert USB A-type plug of the Adapter to

PC’s USB port.

Step-4: The Windows system will show a “New

Hardware Found” window. Click “Next”

Step-5: Put the USB 2.0 to Ethernet Adapter

driver program CD into CD-ROM Driver and

select “Search for the best driver for your device

(Recommended)”. Click “Next”

Step-6: The system will ask you to indicate the

best driver. Make sure the CD driver is selected

and drive d:\ is specified. Click “Next” to

continue.

Step-7: The system will search the specified

driver and start to download the pointed driver.

Click “Next” to Continue.

Step-8: When the system finish the driver

installation, click “Finish” button.

Step-9: Then the system will ask you to restart

your computer. Click “Yes” to restart computer..

LED Indicators

The USB 2.0 to 10/100Mbps Fast Ethernet

Adapter is equipped with LED indicator:

LAN Port status LED:

This indicator green when the port is connected

to 100Mbps Fast Ethernet Hub, if the Adapter to

which the hub is connected is powered off, or if

there is a problem with the link, the LED will

remain off. When the indicator blinking green

while the data will be received to the 100Mbps

Fast Ethernet port. Otherwise, This indicator

indicates amber when the port is connected to

10Mbps Ethernet Hub, if the Adapter to which

the hub is connected is powered off, or if there is

a problem with the link, the LED will remain off.

When this indicator blinking amber while the

data will be received to the 10Mbps Ethernet

port.

USB Connector PinAssignment

Receptacle A Series-A Plug

Receptacle B Series-B Plug

SPECIFICATIONS

Standards: USB Specification V.1.0, 1.1, 2.0

IEEE 802.3 Ethernet Specification

IEEE 802.3u Fast Ethernet Specification

ANSI/IEEE Std 802.3 auto-negotiation

Data Speed: USB 1.0, 1.1, 2.0: 1.5, 12, 480Mbps,

Fast Ethernet: 10/100Mbps

LED indicators: Green: 100Mbps Fast Ethernet Link/Rx

Amber: 10Mbps Ethernet Link/Rx

USB Port: Series-A Plug x 1

Fast Ethernet Port: RJ-45 10/100BASE-T port x 1

EMI Compatibility: FCC Class B, CE Class B, VCCI-II

Dimensions: 65 x 48 x 28 mm

Storage

Temperature: Storage: -25°C ~ 70°C

Operation: 0°C ~ 40°C

Humidity:

(non-condensing) Storage: 10% ~ 90%

Operation: 10% ~70%

Power Consumption: 1.2 Watts (maximum)

Driver Support: Windows 98/2000/Me/XP

Limited Warranty

TRENDware warrants its products against

defects in material and workmanship, under

normal use and service, for the following

lengths of time from the date of purchase.

TU2-ET100 – 5 Years Warranty

If a product does not operate as warranted

above during the applicable warranty period,

TRENDware shall, at its option and expense,

repair the defective product or part, deliver

to customer an equivalent product or part to

replace the defective item, or refund to

customer the purchase price paid for the

defective product. All products that are

replaced will become the property of

TRENDware. Replacement products may

be new or reconditioned.

TRENDware shall not be responsible for any

software, firmware, information, or memory

data of customer contained in, stored on, or

integrated with any products returned to

TRENDware pursuant to any warranty.

There are no user serviceable parts inside

the product. Do not remove or attempt to

service the product by any unauthorized

service center. This warranty is voided if (i)

the product has been modified or repaired

by any unauthorized service center, (ii) the

product was subject to accident, abuse, or

improper use (iii) the product was subject to

conditions more severe than those specified

in the manual.

Warranty service may be obtained by

contacting TRENDware office within the

applicable warranty period for a Return

Material Authorization (RMA) number,

accompanied by a copy of the dated proof of

the purchase. Products returned to

TRENDware must be pre-authorized by

TRENDware with RMA number marked on

the outside of the package, and sent prepaid,

insured and packaged appropriately for safe

shipment.

WARRANTIES EXCLUSIVE: IF THE TRENDWARE

PRODUCT DOES NOT OPERATE AS WARRANTED

ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL

BE, AT TRENDWARE’S OPTION, REPAIR OR

REPLACEMENT. THE FOREGOING WARRANTIES

AND REMEDIESARE EXCLUSIVEAND ARE IN LIEU

OF ALL OTHER WARRANTIES, EXPRESSED OR

IMPLIED, EITHER IN FACT OR BY OPERATION OF

LAW, STATUTORY OR OTHERWISE, INCLUDING

WARRANTIES OF MERCHANTABILITYAND FITNESS

FOR A PARTICULAR PURPOSE. TRENDWARE

NEITHER ASSUMES NOR AUTHORIZES ANY OTHER

PERSON TO ASSUME FOR IT ANY OTHER LIABILITY

IN CONNECTION WITH THE SALE, INSTALLATION

MAINTENANCE OR USE OF TRENDWARE’S

PRODUCTS.

TRENDWARE SHALL NOT BE LIABLE UNDER THIS

WARRANTY IF ITS TESTING AND EXAMINATION

DISCLOSE THAT THE ALLEGED DEFECT IN THE

PRODUCT DOES NOT EXIST OR WAS CAUSED BY

CUSTOMER’S OR ANY THIRD PERSON’S MISUSE,

NEGLECT, IMPROPER INSTALLATION OR TESTING,

UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY,

OR ANY OTHER CAUSE BEYOND THE RANGE OF

THE INTENDED USE, OR BY ACCIDENT, FIRE,

LIGHTNING, OR OTHER HAZARD.

LIMITATION OF LIABILITY: TO THE FULL EXTENT

ALLOWED BY LAW TRENDWARE ALSO EXCLUDES

FOR ITSELFAND ITS SUPPLIERS ANY LIABILITY,

WHETHER BASED IN CONTRACT OR TORT

(INCLUDING NEGLIGENCE), FOR INCIDENTAL,

CONSEQUENTIAL, INDIRECT, SPECIAL, OR

PUNITIVE DAMAGES OFANY KIND, OR FOR LOSS

OF REVENUE OR PROFITS, LOSS OF BUSINESS,

LOSS OF INFORMATION OR DATE, OR OTHER

FINANCIAL LOSSARISING OUT OF OR IN

CONNECTION WITH THE SALE, INSTALLATION,

MAINTENANCE, USE, PERFORMANCE, FAILURE,

OR INTERRUPTION OF THE POSSIBILITY OF SUCH

DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR,

REPLACEMENT, OR REFUND OF THE PURCHASE

PRICE PAID, AT TRENDWARE’S OPTION. THIS

DISCLAIMER OF LIABILITY FOR DAMAGES WILL

NOT BE AFFECTED IF ANY REMEDY PROVIDED

HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.

Governing Law: This Limited Warranty shall be

governed by the laws of the state of California.

Technical Support

You can find the most recent

driver/firmware/software and user

documentations on the TRENDware

website. TRENDware provides FREE

technical support for all customers for

the duration of the warranty period on this

product.

TRENDware Technical Support

Tel: +1-310-626-6252

Fax: +1-310-626-6267

E-mail: support@trendware.com

www.TRENDnet.com

Monday ~ Friday, 7:30AM ~ 6:00PM

Pacific Standard Time

(Except holidays)

Autres manuels pour TU2-ET100

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TRENDnet Adaptateur

TRENDnet

TRENDnet TU2-ET100 Manuel utilisateur

TRENDnet

TRENDnet TEW-648UB - 150Mbps Mini Wireless N USB 2.0... Manuel utilisateur

TRENDnet

TRENDnet TPL-405E Manuel utilisateur

TRENDnet

TRENDnet TU2-ET100 Manuel utilisateur

TRENDnet

TRENDnet TEW-441PC - 108Mbps Wireless PC Card... Manuel utilisateur

TRENDnet

TRENDnet TEW-424UB Manuel utilisateur

TRENDnet

TRENDnet TPL-101U Manuel utilisateur

TRENDnet

TRENDnet TBW-104UB Manuel utilisateur

TRENDnet

TRENDnet TEW-687GA Manuel utilisateur

TRENDnet

TRENDnet TBW-107UB Manuel utilisateur

TRENDnet

TRENDnet TU2-DVIV Manuel utilisateur

TRENDnet

TRENDnet TEW-624UB Manuel utilisateur

TRENDnet

TRENDnet TEG-PCBUSR Manuel utilisateur

TRENDnet

TRENDnet TPL-306E Manuel utilisateur

TRENDnet

TRENDnet TPL-306E Manuel utilisateur

TRENDnet

TRENDnet HotFlash TEW-429UF Manuel utilisateur

TRENDnet

TRENDnet N600 Manuel utilisateur

TRENDnet

TRENDnet TEW-807ECH Manuel utilisateur

TRENDnet

TRENDnet TBW-104UB Manuel utilisateur

TRENDnet

TRENDnet TEW-224UB Manuel utilisateur

TRENDnet

TRENDnet TBW-101UB Manuel utilisateur

TRENDnet

TRENDnet TBW 106 Manuel utilisateur

TRENDnet

TRENDnet TU2-DVIV Manuel utilisateur

TRENDnet

TRENDnet TEW-445UB Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur