TREBLAB HD7 Manuel utilisateur

USER’S MANUAL

HD7

WIRELESS SPEAKER

This speaker provides superior sound quality and mobility combined with rugged

construction and the convenience of hands-free wireless technology.

Thank you for choosing TREBLAB HD7!

WHAT’S IN THE BOX

Speaker

Charging cable

3.5 mm audio cable

Carrying strap

Carabiner

HD7

BUTTONS AND PARTS

Microphone (Mic)

Place for the

carrying strap

LED

POWER ON / OFF

PREVIOUS /

VOLUME -

PLAY / PAUSE

NEXT /

VOLUME +

3.5 mm

cable port

MicroUSB

port

Bike mounting -

1/4-20 UNC

Function Operation

Power ON

Power OFF

Play / Pause

Volume +

Volume -

Answer phone call

Reject phone call

End phone call (hang up)

Redial

Next track

Previous track

Switch between Wireless /

3.5 Audio cable

TWS ON

(need two speakers)

Press and hold the POWER button for 3 seconds

Press and hold the POWER button for 5 seconds

Press the PLAY / PAUSE button

Press the VOLUME + button

Press the VOLUME - button

Press the PLAY / PAUSE button

Press and hold the PLAY / PAUSE button for 2 seconds

Press the PLAY / PAUSE button

Press and hold the PLAY / PAUSE button for 3 seconds

Press and hold the VOLUME + button for 2 seconds

Press and hold the VOLUME - button for 2 seconds

Press the POWER button

Place two speakers near each other. Turn them on

simultaneously. Double click the POWER button

on one of the speakers. Once paired, you will hear

“Stereo Mode” voice prompt

TWS OFF

Factory reset

Press and hold the VOLUME + and VOLUME -

buttons simultaneously on one of the speakers until

you hear “Disconnected”

Press and hold the VOLUME + and VOLUME -

buttons simultaneously for 5 seconds

SETTING UP YOUR HD7

Turn ON

Press and hold the POWER button for 3 seconds. You will hear the sound cue,

and the BLUE LED light will start flashing.

Turn OFF

Press and hold the POWER button for 5 seconds. You will hear the sound cue,

and the flashing BLUE LED light will go OFF.

WIRELESS PAIRING

Make sure TREBLAB HD7 is fully charged and that the AUX cable is not

plugged in.

Turn ON your speaker by pressing and holding the POWER button for 3 seconds.

You will hear the sound cue, and the LED will start flashing BLUE indicating that the

speaker is in pairing mode.

Activate the WIreless Mode on your device (smartphone, tablet, laptop).

Select TREBLAB HD7 from the Wireless devices list. Keep it within 3 feet / 1 meter

of the speaker while pairing.

If necessary, enter passcode 0000.

Once HD7 is successfully paired and connected, the LED will stop flashing and

stay BLUE.

RE-PAIRING

After the initial pairing, the speaker will automatically connect to the previously

paired device when turned ON again. If the reconnection does not happen

automatically, the speaker will start looking for any other previously paired device

within the effective distance range. TREBLAB HD7 can remember up to 8

recently paired devices.

TRUE WIRELESS STEREO (TWS) - PAIRING TWO SPEAKERS

The TWS technology allows you to pair wirelessly two speakers together to create

a dual-channel system for true stereo sound.

Turn OFF the Bluetooth mode on your smart device

Place two speakers near each other (the distance should not be over 3 feet /

1 meter)

Power ON both speakers simultaneously. You will hear the “Power on” voice

prompt, and the LED indicators will flash BLUE

Double click the POWER button on one of the speakers. The LED indicator on

this speaker will start flashing BLUE and GREEN indicating the pairing of the

speakers

Once paired, you will hear the “Stereo Mode” voice prompt, and one of the

speaker’s LED indicator will slowly flash BLUE. The other speaker’s LED will turn

BLUE

Turn ON the Bluetooth mode on your smart device

Choose TREBLAB HD7 from the list of paired devices and click Connect

You should hear “Connected,” and both speakers’ LED indicators will stay

BLUE

Now you can use the speakers in stereo mode. Kindly note that the maximum

distance between speakers should not exceed 33 feet / 10 meters

NOTE: If the speakers were already paired with each other, you would skip the

TWS pairing steps, as they will switch to the stereo mode automatically. After

turning both speakers ON simultaneously, wait for “Stereo mode” voice

prompt. Then turn on the Bluetooth mode on your smart device, and the

speakers will connect to it seamlessly.

To disable the TWS function:

While both speakers are ON, press and hold the VOLUME + and VOLUME - buttons

simultaneously on one of the speakers until you hear the “Disconnected” voice

prompt indicating the connection is lost.

AUDIO PLAYBACK

To pause and resume the playback when connected wirelessly, press the PLAY

button.

To adjust the volume, press the VOLUME + or the VOLUME - button while

listening to music.

To change the track on the HD7, press and hold the VOLUME + or the

VOLUME - button for 2 seconds.

3.5 MM AUDIO CABLE CONNECTION

You can connect TREBLAB HD7 to compatible devices using the supplied

3.5 mm audio cable.

Plug one end of the 3.5 mm audio cable into the 3.5 mm cable port on the bottom

side of the speaker (under the cover). Plug the other end into the 3.5 jack on your

device.

Turn the speaker ON. You will hear the sound cue and the LED light will turn

GREEN. Now you can play music and audio.

NOTE: On-device control is not supported for the VOLUME, NEXT, PREVIOUS and

PAUSE functions when using the 3.5 mm audio cable. Phone calls management

using the PLAY / PAUSE button is not supported. To make adjustments you will

need to use your smart device.

PHONE CALLS

TREBLAB HD7 can be used to make and receive phone calls when

connected wirelessly. Audio playback will be paused during calls.

NOTE: For better call quality, face the microphone when you speak.

Press the PLAY / PAUSE button.

Press and hold the PLAY / PAUSE button for

2 seconds.

Press and hold the PLAY / PAUSE button for

3 seconds.

To Answer / End Call:

To Reject Call:

To Redial:

TROUBLESHOOTING

Problem

Not powering on

Solution

Make sure the speaker is fully charged.

Charge for 3 hours, if necessary.

Press and hold the POWER button for 3 seconds.

Autres manuels pour HD7

Table des matières

Autres manuels TREBLAB Intervenants

TREBLAB

TREBLAB HD77 Manuel utilisateur

TREBLAB

TREBLAB HD-Force Manuel utilisateur

TREBLAB

TREBLAB HD55 Manuel utilisateur

TREBLAB

TREBLAB HD-Max Manuel utilisateur

TREBLAB

TREBLAB FX100 Manuel utilisateur

TREBLAB

TREBLAB HD77 Manuel utilisateur

TREBLAB

TREBLAB FX100 Manuel utilisateur

TREBLAB

TREBLAB HD7 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur