..
123
456
78
0-/--
9
VOL- VOL+
CH+
CH-
P.P
TEXT/TV REVEAL
.
OPERATION OF REMOTE CONTROL
DESCRIPTION OF REMOTE CONTROL KEYS
1
8
5
6
1. STAND-BY BUTTON
Firstly, the power supply of the unitmust be
switched on. When it is in standby status, the
indicator will be lit, press standby button, the
indicator will then go out, after a few seconds, the
unit is on. Press the button once again to turn the
unit off (standby status).
Also the unit can be switch on by pressing
P+ or P- button on the TV set when it is in
standby status.
The unit has the function of no signal muting and
no signal auto switching off. If there is no signal
for several minutes, it can be turned to standby
status automatically.
2. DISPLAYBUTTON
Press the button to display the current information
of the TV.i.e. Channel, Colour System, Sound-
System, etc.
3. CHANNEL BUTTON
1) When the channel number has one figure,
press the number directly.
2) When the channel number has two figures,
it can be accessed by pressing button -/-- first,
say if you want to access program 23, press
button -/-- to see -- on the screen, then press 2
and within 5 seconds of pressing 2, press button
3. If button 3 is not pressed within 5 second the
program accessed is program number 2.
4. RECALL BUTTON
Press the button, the program can be
interchanged between present program and
former program.
5. PROGRAM BUTTONS
Press these button to select the next higher or
lower program number.
6.VOLUME BUTTONS
Press these button to increase or decrease the
sound volume level, volume bar will be displayed.
7.TV/AV SELECTION BUTTON
Press the button to select TV, AV1, AV2 or S-VHS
input signal.
8.SOUND MUTE BUTTON
Press the button to mute the sound completely.
Press the button once again to restore the
previous sound level, and cancel the mute.
15
13
17
18
3
2
4
10
11
12
14
7
8
9
16
