Transmille 8100 Series Manuel utilisateur

www. transmille.com

Page 1

www.transmille.com

8100 Operation Manual - V1.0.1

Version 1.0.1 - 18th June 2018

Page 2 www.transmille.com

8100 Operation Manual - V1.0.1

Warranty

Transmille guarantees this product to be free from defects in material and workmanship under

normal user for a period of one (1) year from the date of shipment. This warranty does NOT cover any

required re-calibration/adjustment or standard maintenance actions. This warranty extends only to the

original end purchaser and does not apply to fuses, batteries, external cables or to the product if it has

been modified, misused, altered or has been subjected to mishandling or misuse.

Transmille’s obligation to warranty is limited to repair or replace the product after return to

an authorized Transmille service centre within the warranty period and is subject to Transmille’s

investigation determining that the fault is not caused by misuse, alteration or through mishandling.

If failure occurs, send the product via pre-paid freight, to the service centre as informed by

Transmille with a description of the fault only after receiving confirmation from Transmille. At

Transmille’s option, either repairs will be performed or a replacement unit of similar condition and

age will be provided.

Transmille will return the product to the end customer or local distributor via pre-paid freight

(with exception of any customs clearance fees).

Transmille accept no responsibility for damage during return shipping for warranty service.

Page 3

www.transmille.com

8100 Operation Manual - V1.0.1 Contents

Introduction .......................................................................8

Key Features......................................................................................8

Available Accessories.........................................................................8

Basic Operation .................................................................9

Front Panel.........................................................................................9

Input Terminals ...................................................................................9

Display ...............................................................................................10

Measurement Display ...........................................................11

Status Indication...................................................................11

Display Elements..................................................................11

Soft Key Text ........................................................................12

Range / Function Indicator....................................................12

Configuration Information......................................................12

On Screen Keyboard ............................................................13

Keyboard............................................................................................13

Major Function Keys...........................................................................13

Menu / Parameter Keys ......................................................................14

Null.......................................................................................14

Digits....................................................................................14

Filter.....................................................................................15

Trig.......................................................................................15

Input.....................................................................................15

Shift......................................................................................15

Config...................................................................................16

Menu....................................................................................16

Exit.......................................................................................16

Enter ....................................................................................16

Soft Keys............................................................................................16

Numeric Keyboard..............................................................................17

Digital Control.....................................................................................17

USB Device Port.................................................................................18

Electrometer Terminals (8104 Only)....................................................18

Rear Panel .........................................................................................19

Power Inlet, Fuses & Voltage Selector ..................................19

LAN Interface........................................................................19

USB Interface.......................................................................19

RS232 Interface....................................................................19

GPIB Interface......................................................................20

Serial Number.......................................................................20

Rear Panel Inputs (8104 only)...............................................20

Current Fuses.......................................................................20

Power On Defaults..............................................................................20

Menus.................................................................................21

Main Menu .........................................................................................21

CALIBRATION .....................................................................21

COUPLING...........................................................................21

DEFAULTS ...........................................................................21

DISPLAY ELEMENT CONFIGURATION................................21

ERROR LOG........................................................................21

Page 4 www.transmille.com

8100 Operation Manual - V1.0.1

FILTER.................................................................................21

FREQUENCY GATE .............................................................22

FUNCTION...........................................................................22

GUARD ................................................................................22

HELP....................................................................................22

INPUT...................................................................................22

INSTRUMENT INFORMATION..............................................22

INTERNAL TEMPERATURE .................................................22

LIMITS..................................................................................23

MATHS.................................................................................23

OHMS COMPENSATION......................................................23

OHMS TEST CURRENT.......................................................23

PRESET...............................................................................23

RATIO CONFIGURATION.....................................................24

RESET .................................................................................24

RESOLUTION ......................................................................24

SELF TEST...........................................................................24

SHUNT CONFIGURATION....................................................24

SPECIFICATION CONFIGURATION.....................................24

TEMPERATURE UNITS........................................................24

TRIGGER MODE..................................................................24

UNCERTAINTY CONFIGURATION.......................................25

Configuration Menu.............................................................................25

DATE & TIME .......................................................................25

FIRMWARE UPDATE [VIA USB DEVICE PORT]..................25

REGIONAL SETTINGS.........................................................26

REMOTE INTERFACE SETTINGS........................................27

SCREEN SAVER TIMEOUT..................................................27

SOUND ................................................................................27

SYSTEM PASSWORD..........................................................27

Calibration Menu.................................................................................27

CALIBRATION MODE ..........................................................27

BACKUP CALIBRATION FACTORS......................................28

RESTORE CALIBRATION FACTORS ...................................28

Display Element Configuration Menu ..................................................29

Performing Measurements ................................................30

General Guidelines.............................................................................30

Measurement Considerations..............................................................30

DC Voltage .........................................................................................32

Selecting A Range ................................................................32

Measurement Resolution ......................................................32

Configuring Sample Rate......................................................33

Performing A Null .................................................................33

Example Connection.............................................................35

AC Voltage .........................................................................................37

Selecting A Range ................................................................37

Measurement Resolution ......................................................37

Configuring Sample Rate......................................................38

Selecting Frequency Gate.....................................................38

Configuring AC / DC Coupling...............................................40

Example Connection.............................................................41

Page 5

www.transmille.com

8100 Operation Manual - V1.0.1

DC Current .........................................................................................43

Selecting A Range ................................................................43

Measurement Resolution ......................................................44

Configuring Sample Rate......................................................44

Performing A Null .................................................................45

Example Connection.............................................................46

DC Current - Electrometer Input (8104 Only) ......................................48

Selecting A Range ................................................................49

Measurement Resolution ......................................................49

Configuring Sample Rate......................................................49

Performing A Null .................................................................50

Example Connection.............................................................51

AC Current .........................................................................................53

Selecting A Range ................................................................53

Measurement Resolution ......................................................53

Configuring Sample Rate......................................................54

Configuring AC / DC Coupling...............................................55

Selecting Frequency Gate.....................................................56

Example Connection.............................................................57

Resistance - 2 Wire ............................................................................59

Selecting A Range ................................................................59

Measurement Resolution ......................................................60

Configuring Sample Rate......................................................60

Configuring Measurement Current ........................................61

Performing A Null .................................................................61

Example Connection.............................................................63

Resistance - 4 Wire ............................................................................65

Selecting A Range ................................................................65

Measurement Resolution ......................................................66

Configuring Sample Rate......................................................66

Configuring Measurement Current ........................................67

Configuring Ohms Compensation..........................................68

Performing A Null .................................................................69

Example Connection.............................................................71

High Value Resistance (8104 Only).....................................................73

Configuring Measurement Voltage ........................................74

Selecting A Range ................................................................74

Measurement Resolution ......................................................74

Configuring Sample Rate......................................................75

Performing A Null .................................................................75

Example Connection.............................................................77

Temperature Measurement - PRT / RTD (8104 Only) ..........................78

Configuring a Probe..............................................................79

Configure Probe Information.................................................79

Configure Probe Wiring Scheme...........................................81

Configure Probe Terminals....................................................81

Configure Probe Linearisation...............................................82

Saving Probe Configuration ..................................................83

Selecting a Probe .................................................................84

Measurement Resolution ......................................................84

Configuring Sample Rate......................................................85

Page 6 www.transmille.com

8100 Operation Manual - V1.0.1

Configuring Temperature Units..............................................86

Configuring Ohms Compensation..........................................87

Performing A Null .................................................................88

Example Connection (2 Wire PRT / RTD)..............................88

Example Connection (3 Wire PRT / RTD)..............................88

Example Connection (4 Wire PRT / RTD)..............................89

Temperature Measurement - Thermocouple (8104 Only).....................90

Selecting Thermocouple Type...............................................90

Configuring Cold Junction Compensation (CJC)....................91

Measurement Resolution ......................................................92

Configuring Sample Rate......................................................93

Example Connection (TCLEAD)............................................93

Example Connection (Direct Connection)..............................94

Ratio Measurements (8104 Only) ......................................95

Configuring Ratio Measurements........................................................95

Available Ratio Modes........................................................................96

Performing a Ratio Measurement........................................................96

Ratio To Value ....................................................................................97

Shunt Current Measurement (8104 Only)..........................97

Shunt Configuration............................................................................97

Selecting and using a Shunt ...............................................................99

Example Connection...........................................................................100

Maths Operations...............................................................101

Arithmetic Functions ...........................................................................101

Multiply by m ........................................................................101

Divide by d............................................................................102

Subtract n.............................................................................102

Sequential Arithmetic............................................................102

Averaging Functions...........................................................................102

Rolling Average ....................................................................102

Block Average.......................................................................102

Remote Operation..............................................................104

Native Commands ..............................................................................104

Command Structure..............................................................104

Command Response Codes .................................................104

Setting Ranges/Functions.....................................................105

AC Voltage ...........................................................................105

DC Voltage ...........................................................................105

AC Current ...........................................................................105

DC Current ...........................................................................105

4 Wire Resistance - Low Current .........................................105

4 Wire Resistance ...............................................................105

2 Wire Resistance - Low Current .........................................105

2 Wire Resistance ...............................................................106

Thermocouple (8104 Only)....................................................106

PRT (ITS-90 Linearisation) (8104 Only) ................................106

PRT (IEC751 Linearisation) (8104 Only) ...............................106

Electrometer Output Voltage (8104 Only)..............................106

Measurement Parameters.....................................................107

Obtaining Readings ..............................................................107

Setting Resolution ................................................................107

Page 7

www.transmille.com

8100 Operation Manual - V1.0.1

Setting Filter.........................................................................107

System Functions.................................................................107

Enable / Disable Backlight ....................................................107

Reset to Startup Parameters.................................................108

Query Instrument ID .............................................................108

Query Instrument Internal Temperature.................................108

Perform backup of Calibration Factors..................................108

Calibration & Verification ..................................................109

Introduction.........................................................................................109

Calibration Instructions .......................................................................109

Important Notes..................................................................................109

Page 8 www.transmille.com

8100 Operation Manual - V1.0.1 Introduction

The 8100 Series Digital Multimeter is a high performance instrument capable of reading a

wide range of input signals. Available as two models, accuracies of up to 4ppm, are available while

maintaining an easy to use interface that is familiar to users of similar equipment.

Key Features

• AC/DC Volts to 1025V

• AC/DC Current to 30 Amps

• Dedicated Low Current inputs for high sensitivity measurements (8104 Only)

• 2 and 4 Wire Resistance with selectable current

• High Resistance Measurement to 1 TOhm (8104 Only)

• Frequency Measurement

• Thermocouple Measurement with Automatic Cold Junction (8104 Only / Requires

TCLEAD)

• PRT Measurement with conversion to ITC-90 and IEC751 (8104 Only)

• Electronically switchable Front and Rear Terminals (8104 Only)

• Multi Interface (RS232, USB, GPIB/IEEE 488, Ethernet

Available Accessories

The 8100 Series has a full range of complimentary accessories to assist with getting the best out

of the Instrument. Accessories include:

• A Soft Carry Case for hand carried transit (8100-SCASE)

• A Hard Transit case, laser cut with storage areas for leads and accessories for shipping

via courier (8100-TCASE)

• A comprehensive lead set that includes leads and accessories for making high

performance measurements (8100-LEAD)

• Options for Rack Mount configuration (RACKTRAY and 8100-RACKCASE)

• Automated Cold Junction Measurement lead (TCLEAD)

Page 9

www.transmille.com

8100 Operation Manual - V1.0.1 Basic Operation

Front Panel

The 8100 Front Panel has been designed to be easy to operate with inputs located on the Left

hand side and clearly labelled keys.

Input Terminals

Warning

To avoid electrical shock, injury of death, never touch any lead connected (or terminal) of the

multimeter unless certain that no dangerous voltages are present.

The 8100 Series Multimeter’s offer Front and Rear (8104 Only) Terminals. The default set of

terminals on start up is always the Front Panel Terminals. When front panel input is selected the active

set of terminals are indicated with a green LED Indicator next to the terminals.

Take care to avoid overloading the inputs. Each input has the maximum input labelled next to

the input, with more information available in the extended specifications.

The Front and Rear Inputs of the 8104 can be selected using the INPUT menu or over the

remote interface. When the 8104 is using REAR panel inputs the indicator in the top right of the

Table des matières

Autres manuels Transmille Multimètre

Transmille

Transmille 8071 Manuel d'installation

Manuels Multimètre populaires d'autres marques

Agilent Technologies

Agilent Technologies 34420A Manuel utilisateur

Fluke

Fluke 83 Manuel utilisateur

Hameg

Hameg HM 8012 Manuel utilisateur

Mastech

Mastech MY70 Manuel utilisateur

Steren

Steren MUL-300 Manuel utilisateur

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manuel utilisateur

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manuel utilisateur

PeakTech

PeakTech 4000 Manuel d'utilisation et d'entretien

YOKOGAWA

YOKOGAWA 90050B Manuel utilisateur

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manuel utilisateur

Fluke

Fluke 8846A Manuel d'utilisation et d'entretien

Tempo Communications

Tempo Communications MM200 Manuel utilisateur

Elenco Electronics

Elenco Electronics CM-1555 Manuel utilisateur

Mastech

Mastech MS8238C Manuel utilisateur

SDAR

SDAR 830A, 830B, 830D, 830C Manuel utilisateur

RS PRO

RS PRO RS-9519BT Manuel utilisateur

BGS technic

BGS technic 8890 Manuel utilisateur

Amprobe

Amprobe Hexagon 60 Manuel utilisateur