TransLite TL-9542A Manuel utilisateur
P a g e | 1
(MPEG-2 HD/MPEG-4 HD Encoding + ATSC Modulating)
DISCLAIMER
No part of this document may be reproduced in any form without the written permission of the copyright
owner.
The contents of this document are subject to revision without notice due to continued progress in
methodology, design and manufacturing. TRANSLITE GLOBAL LLC shall have no liability for any error or
damage of any kind resulting from the use of this document.
COPY WARNING
This document includes some confidential information. Its usage is limited to the owners of the
product that it is relevant to. It cannot be copied, modified, or translated in another language
without prior written authorization from TRANSLITE GLOBAL LLC
PRODUCT MODEL NUMBER: TL-9542A 4 HDMI TO 4
ATSC ENCODER MODULATOR
ABOUT THIS MANUAL
P a g e | 2
INDEX
TABLE OF CONTENTS
CHAPTER 1 INTRODUCTION ..................................................................................................... 3
1.1 PRODUCT OVERVIEW.......................................................................................................... 3
1.2 KEY FEATURES..................................................................................................................... 3
1.3 SPECIFICATIONS .................................................................................................................. 4
1.4 PRINCIPLE CHART............................................................................................................... 6
1.5 APPEARANCE AND DESCRIPTION ........................................................................................ 8
CHAPTER 2 INSTALLATION GUIDE............................................................................................. 9
2.1 GENERAL PRECAUTIONS.................................................................................................... 10
2.2 POWER PRECAUTIONS ...................................................................................................... 10
2.3 DEVICE’S INSTALLATION FLOW CHART ILLUSTRATED AS FOLLOWING.................................. 10
2.4 ENVIRONMENT REQUIREMENT......................................................................................... 11
2.5 GROUNDING REQUIREMENT............................................................................................. 11
CHAPTER 3 OPERATION.......................................................................................................... 12
3.1 LCD MENU STRUCTURE..................................................................................................... 13
3.2 GENERAL SETTINGS FOR MAIN MENU ............................................................................... 15
CHAPTER 4 WEB NMS OPERATION......................................................................................... 23
4.1 LOGIN............................................................................................................................... 24
4.2 OPERATION....................................................................................................................... 25
CHAPTER 5 TROUBLESHOOTING ............................................................................................ 36
CHAPTER 6 PACKING LIST....................................................................................................... 37
CHAPTER 7 APPLICATIONS ..................................................................................................... 38
P a g e | 3
CHAPTER 1
INTRODUCTION
1.1 PRODUCT OVERVIEW
TL-9542A series products are TRANSLITE’s new breakthrough all-in-one devices which
integrate encoding (MPEG-2 HD, MPEG-4/AVC H.264) and modulating (DVB-C, DVB-T, ISDB-
T, or ATSC) to convert V/A signals into RF output. It is equipped with 4 HDMI channels input
and 1 ASI input and output with 2 ASI ports and 1 UDP IP port.
It adopts inner drawer-type structural design which greatly facilitates the change of encoding
modules (HDMI/CVBS/SDI/YPbPr/…) as needed.
The signals source could be from satellite receivers, closed-circuit television cameras, Blue-ray
players, and antenna etc. Its output signals are to be received by TVs, STB, etc. with
corresponding standard.
With its various inputs available, our TL-9542A series products are wildly used in public places
such as metro, market hall, theatre, hotels, resorts, etc. for advertising, monitoring, training and
educating in companies, schools, campuses, hospital. It’s a good choice to offer HD channels
and more.
1.2 KEY FEATURES
➢MPEG2 HD & MPEG4 AVC H.264 HD video encoding
➢MPEG2 HD/MPEG4 HD video encoding
➢Up to 1920*1080@50P/60P supported (MPEG4 HD)
➢Up to 1920*1080@50I/60I supported (MPEG2 HD)
➢4* HDMI in, 1*ASI in
➢Simultaneously encoding each channel more than 10Mbps
P a g e | 4
➢4* ATSC RF out (4 carriers combined output)
➢Support IP (MPTS) output
➢Excellent modulation quality MER≥42dB
➢RF Frequency range 30Mhz~960Mhz
➢LCD display, Remote control and firmware
➢Web NMS management; Updates via web
➢Lowest cost per channel --- breakthrough price
1.3 SPECIFICATIONS
Encoding Section - Video
Encoding
MPEG2, MPEG4 AVC/H.264
Input
HDMI*4 (or SDI*4)
Resolution
1920*1080_60P, 1920*1080_50P,
(-for MPEG4 AVC/H.264 only)
1920*1080_60i, 1920*1080_50i,
1280*720_60p, 1280*720_50P
720*480_60i, 720*576_50i
Low delay
Normal, mode 1 mode 2
Encoding Section - Audio
Encoding
MPEG1 Layer II, MPEG2-AAC, MPEG4-AAC, AC3 2.0（Optional）
Sample rate
48KHz
Bit rate
64kbps, 96kbps,128kbps, 192kbps, 256kbps, 320kbps
Functions
PID re-mapping (auto/manually optional)
PCR accurate adjusting
PSI/SI table automatically generating
P a g e | 5
ATSC
Standard
ATSC A/53
MER
≥42dB
RF frequency
4 carriers combined output;
30~960MHz, 1KHz step
RF output level
-26~-10dbm (81~97dbµV), 0.1db step
Constellation
8VSB
SYSTEM
Local interface
LCD + control buttons
Remote
management
Web NMS
output
ASI out (BNC type);
1 IP (4*SPTS or 1 MPTS) out over DUP, RTP/RTSP (RJ45, 100M)
NMS interface
RJ45, 100M
Language
English
Local interface
LCD + control buttons
GENERAL
Power supply
AC 100V~240V
Dimensions
420*400*44mm
Weight
4.5 kgs
Operation
temperature
0~45℃
P a g e | 6
1.4 PRINCIPLE CHART
P a g e | 7
Typical Application of 4 * ATSC Carrier Outputs
Firstly, it is to guarantee the sound picture quality of HD programs.
As we all know, to guarantee the picture quality of 1920x1080@50I/60I resolution HD program,
the video bit-rate may reach up to 11Mbps and even above. However, the maximum
possible bit-rate output for single ATSC-T carrier is only around 19 Mbps.
11Mbps x 4 = 44Mbps > 19 x 2 Mbps.
It means the single or even dual ATSC-T carriers simply can't carry the 4 channels 1080i HD
program if the average bit-rate exceeds 8Mbps.
That's why we design 4*ATSC-T carrier modulation board which broaden the maximum possible
bit-rate bandwidth up to 76Mbps (19*4), which rightly makes it reliably carry 4 channel HD
programs output simultaneously.
Below brief chart will help to illustrate the working principle more clearly.
P a g e | 8
1.5 APPEARANCE AND DESCRIPTION
Front Panel Illustration
1 2 3 4 5 6 7 8 9
1
LCD Screen
2
NMS Port
3
Data Port
4
Power and Alarm Indicators
5
TS Lock Indicators
6
Up and Down, Left and Right Buttons
7
Enter Mode: For Confirm
8
Menu Button: For Back Step
9
Lock Button: Press to Lock Set
P a g e | 9
Rear Panel Illustration
1 2 3 4 5 6 7 8 9
1
HDMI module 1: HDMI input port 1 & 2
2
HDMI module 1: HDMI input port 3 & 4
3
RF input port (for combiner use)
4
RF output port
5
ASI input port
6
ASI output ports
7
Switch
8
Power supply slot
9
Grounding
CHAPTER 2
INSTALLATION GUIDE
This section is to explain the cautions the users must know in some case that possibly injure
may bring to users when it’s used or installed. For this reason, please read all details here and
make in mind before installing or using the product.
P a g e | 10
2.1 GENERAL PRECAUTIONS
➢Must be operated and maintained free of dust or dirty.
➢The cover should be securely fastened, do not open the cover of the products
when the power is on.
➢After use, securely stow away all loose cables, external antenna, and others.
2.2 POWER PRECAUTIONS
➢When you connect the power source, make sure if it may cause overload.
➢Avoid operating on a wet floor in the open. Make sure the extension cable is in
good condition
➢Make sure the power switch is off before you start to install the device
2.3 DEVICE’S INSTALLATION FLOW CHART
ILLUSTRATED AS FOLLOWING
Connecting
Grouding
Wire and
Power
Cord
Acquisition
Check Installing
Device Setting
Parameter Running
Device
Connecting
Signal
cable
Autres manuels pour TL-9542A
1
Table des matières
Autres manuels TransLite Modulateur
