Adjustable
Seatpost
Rear Brake
Front Derailleur
Bolt On
Cable Guide
Rear Derailleur
Cable Routing
Every Transition Bike frame has specic cable routing
designed for optimal performance and safety of the rider.
Maintenance
It is crucial to the longevity of your Transition frame that you properly
maintain and inspect it. We recommend that all service be done by a
qualied Transition Bikes dealer.
Before you begin any ride it is very important to inspect your entire
frame for any cracks, loose pivots or bolts, and properly functioning
bearings. In addition to inspecting your frame, checking your entire bike
to make sure it is working properly must happen before every ride. This
includes but is not limited to checking tire pressure, ensuring the wheels
are secure to the frame and fork, all components and brake bolts are
tight and pedals are secure. Also, a quick check of your brake pads
and brakes to insure they are working properly and ready to ride. If you
are unsure of what you need to check on your bike to make sure it is
safe, please bring your bike to a bicycle shop to have them inspect and
maintain it before you begin a ride.
Front Derailleur
For SRAM mounted derailleurs, mount the cable to the stop in the
bottom bracket yoke. For Shimano derailleurs, use the provided bolt on
clamp that bolts to the bottom bracket pivot.
Bearings
Take apart all the linkage and rocker arms to inspect the
bearings to see if they are rotating smoothly. If they do
not feel smooth or are seized up, you should replace the
affected bearings. Always replace bearings in pairs.
Rocker Arm Pivot Bearings Qty: 4 - 6901
Bottom Bracket Pivot Bearings Qty: 2 - 6902
Dropout Seat Stay Pivot Qty: 2 - 6900
Torque Settings
Torque ratings for the hardware used on this product are
listed below. Damage caused by over/under torquing will not
be covered by the warranty on this product.
• All Pivot Bolts 150 in/lbs (16.9 N·m)
• Sleeved 2 piece Shock Mounting Bolt 125 in/lbs (14 N·m)
• Main Rocker Arm Shock Mounting Bolt 200 in/lbs (22.5 N·m)
• Rear Axle 100 in/lbs (11.3 N·m)
• Dropout Bolt 75 in/lbs ( 8.4 N·m)
