- 6 -
Control Buttons for theMassageChair
1.ON/OFF
Press this button onceand the backlight ofthe RemoteControlwill start blinking.Press any massagefunctionbuttonto begin the
massagefunctionofchoice. Selectingthemassagefunction will also start the timer. Press thisbuttonagain to stopallmassage
functions.Themassagerollers willreturn to theiroriginalposition.
2/3.Recline/SitUp-AngleAdjustment Control Button for MassageChair
These two controlbuttonscan adjust theReclining/Sit Up angle respectively.Pressonceonthe RecliningorSit Up controlbuttonto
adjust theBackrestand/orFootrestto a comfortable position.Pressany ofthe controlbuttonsagain to adjustforthe following:
Recline,Sit Up, Lift Leg, Recline Leg to confirmtheposition.
4/5.LiftLeg/ReclineLeg-AngleAdjustmentControl Button for Legs/Calves
These two controlbuttonscan adjust the massage angle onthe leg rest. Press onceon theLift Leg or Recline Leg controlbuttonand
thelegrest will adjust itselfto a comfortable position. Pressanyofthe controlbuttonsagain forReclining,Sit Up,Lift Leg or Recline
Leg to confirmthe position.
6. Timer
Afterthemassageprocessis activated,thechairwill be automatically set on a15-minuteTimer. By pressingthetimerbutton,you
may changethe lengthofthe massagein fiveminute intervals. Whenone minuteremains onthe timer,the backlightoftheRemote
Controlwill light up automatically.This will be followed by five beepsto alert the user.
7. Backlight
By pressing this key,thebacklight on the remote controlmay be turnedONorOFF. When theBacklight is on,press thisbutton
again,and the Backlight willgo off after30 seconds.Pressingany functionbuttonwill also activatethe Backlight. The light will
automatically shutoffafter30seconds.
8.PauseButton
To momentarily stop a massagefunction,pressthepause button. Whenthe chairis in massagemodeandthe userwishes to
temporarily pause activity, press the Pause button and all massage functions will stop. The “Pause” icon will be blinking on theremote
controland the settime countdownwill be pausedas well.The chairwill be in idle mode. Only the “Pause, Backlight, Recline, Sit Up,
Lift Leg, Recline Leg” can be used. PressthePausebuttonagain to discontinue the “Pause” function and resume the original massage
function.Thesettime countdownwill resume.
9. Auto ScanButton
As the position of the user’s neck, shoulder, back and waistareunique to each individual,thechairis equipped with an AutoScan
function that can be adjusted according to the user’sheight to achievea more effective massage.At thesame time,the
Upward/Downwardmanualcontrolbuttonhelpsto provide moreprecise massageat the exact pointfora more effective and in-depth
massage. Every time this buttonis pressed,theAutoScanwill scan the body anddetermine thebest massagestrength.When the best
massagestrength is detected,theMassageRollers will stop at thatposition,andthemachine willbeep once.The Auto Scanis then
completed 5secondslater.
It is suggested the Backrest be adjusted to the best angle in order to achieve the most accurate body scan.
Please sit upright and relaxduring the process of scanning for the most accurate scanning result.
All fourAuto Programs –Healthcare,Relax,Therapy,andSmartare equipped with AutoScan function. Please refer to the “Auto
Program” section for additional information.
10/11. Back MassageUp/Down Level Adjustment Button
Fora more comprehensive andcomfortable massage,theusercan furtheradjust theheight ofmassagebypressingthe Button within 5
secondsofhearing thebeep.The MassageRollers willgo upwardsordownwardsaccordingto yourrequestuntilyou reachyourmost
comfortableposition.
Full Body Auto Program
If one ofthefourAuto Programs is activatedbeforethe AutoScanoftheentirebody,the machinewill automatically do a height scan
for the back. Should the user prefer, the massage height can manually be adjusted to the preferred level.
Additionally,when theAutoProgramforthe entirebodyorlocalized massageis operating,the strengthofthe airpressurecan be
adjusted by pressing the Back & Seat Intensity ControlButton.
AfteractivatingtheAutoProgram,boththeVibration and Heat function for the backcan be activated according to individual
needs.
