TRAIL ME TM-07P Manuel utilisateur
GPS tracking system
1
USER GUIDE
Personal/Asset/ TRAILME GPS SYSTEM
GPS tracking system
2
1. Product Overview
Thank you for using this brand new personal GPS tracker. This device is an innovative miniature size and personal
remote positioning device with built-in U-blox GPS and GSM/GPRS technology. It’s for monitoring and protecting
people and property. It can be used in all walks of life from traveling lone workers and mobile nursing staff to
children and the elderly, Dementia etc.
What’s New?
1. Unique design, combination of style and technology.
2. Supports A-GPS for accelerated positioning.
3. Supports GPS and Cellular tracking.
4. Two way voice communications.
5. Fall detection via 3D G-sensor
6. Firmware upgrade over the air.
7. Built-in 8MB flash memory.
8. GPRS blind area data re-upload function.
GPS tracking system
3
2. Getting Start, Please follow me!
2.1 Hardware and Accessories:
This device is supplied in a box which includes:
Device USB Cable
2.2 Functional Parts
2.3 Functional Parts
GPS tracking system
4
2.3 Functional Parts
GPS tracking system
5
2.4 How to insert the SIM card
Using the image below as a guide, flip and rotate your SIM card until it matches the image, then insert your SIM card into the SIM slot.
To ensure the SIM card has been inserted all the way, push the SIM card until you hear a click, which indicates the card has been successfully inserted.
Usages
- For the first time use, please fully charge the battery around 8 hours.
- When charging, the Power LED will be on (solid). After fully charged, the power LED will be off.
- Insert an activated Micro SIM card and turn on the unit by pressing the on/off button for 3 seconds.
- Please keep the unit under the open sky or close the window to be able to get a fix on the satellites.
3. To set the Authorized Number
※It is not mandatory for all three of the authorized numbers to be set, however a minimum of one must always be set.
Set up the 3 authorized mobile phone numbers to track the unit.
①Command: A1
Note: With no spaces in the text, case-insensitive.
※Using your mobile phone, send A1 to the SIM card phone number in the device, it will reply you a message: ·Set mobile
number 1 OK!
GPS tracking system
6
※To delete this number from stored memory, you can send A0 to the tracker.
②Command: B1
The device will reply you a message: ·Set mobile number 2 OK!
※To delete this number from stored memory, you can send B0
③Command: C1
The device will reply you a message:·Set mobile number 3 OK!
※To delete this number from stored memory, you can send C0
4. Modify the Time zone:
Command: TZ+ +00/-00
Note: the time must amounts be in 2 digits and at maximum 23 hours in value. “+” in the “time zone” portion of the text indicates
east. The symbol “-“ in the “time zone” indicates west.
Example: tz+02, the system will add 2 hours based on the UTC time.
tz-02, the system will minus 2 hours based on the UTC time.
※UTC time has been set as default time.
5. User defined name in SMS content:
Command: name1, user name
Example: name1, Ryan, the tracker will reply “Add name ok!”
※To delete name, you can send name0
GPS tracking system
7
6. Location request:
6.1 Reply with coordinates and web link.
Command: loc
The device will reply “Time: xxxxx; Lat: xxxx; Lon: xxxx; Spd: xxxxx, Altitude:xxxx Bt: xxx
maps.google.com/maps?q=loc:12.86673,77.650620
※Put coordinates to Google earth or Google maps. Click on search button, then you will find the position fixed.
※Click on the link then the location can be shown directly on Google Map on your mobile phone.
6.2 Reply with Address.
Command: add
Notes: This function needs GPRS function support!
The device will reply “Add: 35, Basapura Main Road, Basapura, Bengaluru, Karnataka 560100, India;
7. Cell Locate
※The unit can be tracked by GSM base station tower, If GPS signal is not available for example in room, underground etc, user can
be located by GSM tower.
However, as compared to GPS satellite, GSM accuracy is proven to be worse than that of GPS. GSM provider utilizes triangulation
techniques to try to
pinpoint the location of the device, and GSM base station is further affected by factors similar to GPS in the sense of the barriers
affecting signal quality and
the density of GSM towers to assist in the triangulation effort, with some regional areas having errors of 100M-2KM!
Command: CL1
The device will reply “Cell locate on!
To turn off this function, please send CL0
8. GEO-FENCE Alarm
Command: G+X, Y, Z, xxxM/KM
Example: G1,1,1,100M
GPS tracking system
8
Notes: No space in between.
X=No. Of Geo fence (1~3), user can set 3 Geo fences
Y=0 means to turn off the function Y=1 means to turn on the function
Z=1 means to set alarm when the tracker enters the preset area
Z=0 means to set alarm when the tracker breaches the district
xxx is the preset distance to the tracker’s original place, must be 3 digitals. M means meters, KM means kilometers
The device will send the message to the authorized numbers as “Geo fence alarm!+GPS info” when it enter the area you set.
(User must set this function when tracker already fixed GPS signal)
To turn off this function, please send G1,0 or G2,0 or G3,0
9. Over-Speed alert
Command: speed1,+ Speed
Notes: The speed must be in value of speed and in 2 or 3 digitals. (01~255km/h)
Example: speed1,100
Suppose the over-speed alert that we want to set is 100km/h, when the device moves exceeds 100km/h, it will send message “Over-
speed! +GPS Info” to allpreset numbers.
To turn off this function, please send speed0 to the device.
GPS tracking system
9
10. GPS signal lost and recovery alert:
Command: GR1
The device will automatically send the latest available GPS information to the preset numbers when it enters into the area without
GPS signal.
If user goes into an area that does not have a GPS signal, such as a tunnel, cave, parking garage, etc. –the device will know where
user was 10 minutes before they went into such an area. This is critical! If a child goes missing –you’ll be able to know the closest
possible location before the GPS signal was lost.
With any SMS sent during the period without GPS signal, the device will reply GPS information to preset numbers soonest as the GPS
signal is covered. To turn off this function, please send GR0
11. Movement Alert:
Command: M1, xxxM/KM
Notes: xxx is the preset distance to the tracker’s original place, must be 3 digitals. M means meters, KM means kilometers
Example: m1,100m
When the tracker moves out of 100 meters, it will send SMS alarm to the preset numbers.
To turn off this function, please send M0 to the device.
12. Listen-in (Voice wiretapping):
Command: L1
Only A1, B1, C1 number can make a silence call to the tracker, the track answers the call automatically and allows the caller to listen
to what happens around
the tracker. There is no voice indication that the call is in progress.
To turn off this function, please send L0 to the device.
13. Vibration alarm:
Command: V1, xx S/M/H
Note: No space in between, S means second, M means minute, H means hour, xx means the time you set and must be two digitals.
Example: V1,05M
If user turns on this function, device will detect motion every 5 minutes and will send SMS alarm to all registered phone numbers for
warning.
To turn off this function, please send V0
GPS tracking system
10
14. Shut down 3 LEDs:
Command: LED1
The device will reply “LED off” and later LEDs will stop flashing, but device is actually running.
To turn off this function, please send LED0
15. AGPS
Command: AGPS1
A-GPS is for accelerated positioning and helping position a device when GPS signals are weak or not available. GPS satellite signals
may be impeded by tall
buildings, and do not penetrate building interiors well. A-GPS uses proximity to cellular towers to calculate position when GPS
signals are not available.
To turn off this function, please send AGPS0
16. Fall detection
Command: FL1
Device will reply “fall detection on” and will send alarm to all registered phone numbers if detect fall.
A simple fall may cause a devastating consequence. A Fall Sensor can help you get immediate help without missing any important
moment.
To turn off this function, please send FL0
17. Smart Power saving mode
Command: PS1
Device built-in motion sensor. Under this mode, GSM chip always on, GPS chip activates by motion or incoming call or SMS, GPS chip
off when its no motion
or calling or SMS. You won't waste any battery life when device isn't moving.
Under normal use, battery can last 4 ~ 10 days.
To turn off this function, please send PS0
Table des matières
