Creeper lock™ Beadlock Wheel Hub Cover
InstalLation Instructions
Clean the top surface of the Hub Cover thoroughly
with isopropyl (rubbing) alcohol. Dry the top of the
Hub Cover thoroughly with a clean cloth. NOTE: For
best results, Steps 1-3 should be done in a room
temperature or warmer (68°F minimum) environment.
step 1
Remove the backing from the dome label and apply to
the center of the Hub Cover.
step 2
Press down rmly on the label with your ngers to
ensure good adhesion. For best adhesion, keep the
Hub Cover in a room-temperature or warmer environ-
ment (68°F minimum) for 24 hours after applying the
label.
step 3
If supplied, install the provided O-ring onto the hub
cover. Otherwise, you may skip this step.
step 4
Install the hub cover into the center bore of the wheel
from the back side of the wheel.
step 5
Install the wheel onto your vehicle and torque the lug
nuts to the torque specied in your owner’s manual.
step 6
