TU600B
Trackunit TU600B, Technical Manual v1.0, March 2022 Page 6
RESELLER’S AND ITS CUSTOMERS’ SOLE RISK, AND
TRACKUNIT SHALL HAVE NO LIABILITY WHATSOEVER IN
CONNECTION THEREWITH. RESELLER SHALL INDEMNIFY
AND HOLD TRACKUNIT AND ITS SUPPLIERS HARMLESS
FROM ANY CLAIM BROUGHT AGAINST TRACKUNIT
WHICH ARISES FROM RESELLER’S USE OR
DISTRIBUTION OF THE PRODUCT IN CONNECTION WITH
SUCH ENVIVRONMENTS OR APPLICATIONS. SOME
STATES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON DURATION OR THE EXCLUSION OF AN
IMPLIED WARRANTY, SO CERTAIN OF THE ABOVE
LIMITATIONS MAY NOT APPLY TO EVERY RESELLER.
Embedded Software/Firmware
The Product and associated tools, if any, may contain embedded
software/firmware, which is licensed, not sold, and is only for
use within the Product as an integral part thereof. Such
embedded software/firmware (which includes all updates
thereto) contains valuable trade secrets and is proprietary to
Trackunit and its suppliers. To the greatest extent permitted by
law, such embedded software/firmware may not be modified,
copied, disassembled, decompiled or reverse engineered.
Trackunit reserves all other rights.
Limitation of Liability
TRACKUNIT’S ENTIRE LIABILITY REGARDING THE
PRODUCT SHALL BE LIMITED TO THE AMOUNT
ACTUALLY PAID BY RESELLER FOR THE PRODUCT. TO
THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO EVENT SHALL TRACKUNIT OR ITS SUPPLIERS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES WHATSOEVER UNDER ANY
CIRCUMSTANCE OR LEGAL THEORY RELATING IN ANY
WAY TO THE PRODUCTS, ACCOMPANYING
DOCUMENTATION AND MATERIALS, AND ANY
EMBEDDED SOFTWARE/FIRMWARE AND UPDATES
THERETO (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF DATA OR ANY
OTHER PECUNIARY LOSS), REGARDLESS OF WHETHER
TRACKUNIT HAS BEEN ADVISED OF THE POSSIBILITY OF
ANY SUCH LOSS AND REGARDLESS OF THE COURSE OF
DEALING BETWEEN TRACKUNIT AND RESELLER.
BECAUSE SOME STATES AND JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY
FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE
ABOVE LIMITATION MAY NOT APPLY TO EVERY
RESELLER.
Notices
Class B Statement – Notice to Users. This equipment has been
tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the
receiver.
– Consult the dealer or an experienced radio/TV technician for
help.
Changes and modifications not expressly approved by the
manufacturer or registrant of this equipment can void your
authority to operate this equipment under Federal
Communications Commission rules.
Regulatory Approvals
CE
The TU600B product comply with the essential requirements of
the RED Directive 2014/53/EU as stated by the Declaration of
Conformity (CE). The TU600B product comply with the
European Telecommunications Standards Institute
Specifications EN 301 489-1, EN 301489-17 (Bluetooth LE),
EN 301 489-19 (GPSS/GNSS) and EN 301 489-52 (EMC for
GPS, GSM 900MHz/1800MHz and LTE cat M1/NB2
700MHz/900MHz/1800MHz/2100MHz Radio Equipment and
Systems).
EU/ International/Automotive
The TU600B product comply with the essential requirements of
the UN regulative ECE R10 EMC rev5 clause 6.5, 6.6, 6.8 and
6.9,
The TU600B product comply with the essential requirements of
the Directive 2006/42/EC, EU regulation 167/2013 and the
Directive 2014/30/EU; with standards ISO-13766-1, -2 and EN
ISO 14982, ISO 12895 for tractors, forest, and agricultural
machinery, moving machinery, construction machinery, lifts,
trucks etc.
• The product complies with the essential requirements of the
2011/65/EC directive and amendment 2015/863/EU on the
restriction of the use of certain hazardous substances in
electrical and electronic equipment (ROHS 3).
• The product complies with the essential requirements of the
EC 1907/2006 regulation concerning the Registration,
Evaluation, Authorization and Restriction of Chemicals
(REACH).
• The product complies with the requirements of the 2012/19/EU
directive on waste electrical and electronic equipment (WEEE).
FCC
The TU600B product comply with the FCC Part 15, Part 22,
Part 24, Part 27, part 90 and the Industry Canada requirements
RSS-102, RSS-132, RSS-133, RSS-139.
The TU600B product comply with Part 15 of the FCC rules and
Industry Canada license exempt RSS standard(s). Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
For fixed mounted operations the TU600B must be installed to
provide a separation distance of at least 20 cm from all persons.
MIC (Japan)
(Shared with Quectel BG95-M3 module certificate):
The TU600B product complies with the Japanese
Telecommunication Business Act for radio terminal equipment
supporting LTE M1 / NB IoT at 800, 1800, 2100 MHz (Band
B18/B19, B3, B1) and Bluetooth LE (2402 – 2480 MHz).
