Tracker PRO Series Manuel utilisateur

Information specifically for:

IL-TRACKER575S/1

V1.3

This manual contains important information.

Please read before operating fixture.

IMPORTANT INFORMATION

Save original packing and documentation for warranty, service and return issues.

Limited Warranty: This warranty covers defects or malfunctions in this equipment. This warranty lasts

for a period of one year from date of purchase. It is the owner’s responsibility to provide invoices for

proof of purchase, purchase date and dealer or distributor. If purchase date can not be provided,

warranty period will start at manufacture date. It is the sole discretion of Techni-Lux to repair or replace

parts or equipment. All shipping will be paid by purchaser. This warranty does not cover lamps, fuses,

belts, power semiconductors, relays, cleaning, standard maintenance adjustments or normal wear items

or any problem resulting from the following: improper wiring, incorrect voltage (including low or over

voltage conditions and lightning), abuse, misuse, improper maintenance or an act of God or damage

resulting from shipping. Warranty will be null and void if the product is altered, modified, misused,

damaged, or subjected to unauthorized repairs. Lamps are covered by relevant manufacturer warranty.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to

state. Any liability for consequential and incidental damages is expressly disclaimed. No other warranty,

expressed or implied is made. Techni-Lux liability in all events is limited to, and shall not exceed, the

purchase price paid.

Returning equipment and Repairs: All returns must be accompanied by a Return Merchandise

Authorization (RMA) number and sent pre-paid. Contact the dealer or Techni-Lux directly to obtain an

RMA. The RMA number must be clearly listed on the shipping label. Due care must be exercised in

packing all merchandise to be returned. All repairs must be accompanied by a written explanation of the

claimed problem or error encountered. Techni-Lux is solely responsible for determining a product’s

eligibility for coverage under warranty. If returning for consideration of credit, all accessories and

documentation, original protective material and cartons must be included and the equipment, packing

and carton must be in new resalable condition. Credit for returned merchandise will be issued at the

lowest current price and is subject to a restocking fee of 20%. No returns accepted on discontinued

items. Techni-Lux is not responsible for merchandise damaged in transit and reserves the right to refuse

any return that is damaged by the carrier, not accompanied by a Return Authorization Number (RMA#) or

sent by freight collect.

Claims: All claims must be made within seven (7) days of receipt of merchandise. Any physical

damage must be reported to carrier upon receipt of merchandise.

Please record the following information for future reference:

Model Number: IL-TRACKER575S/1

Serial Number: ________________________________________

Dealer: ______________________________________________

Date of Purchase: ______________________________________

www.Techni-Lux.com

10779 Satellite Boulevard

Orlando, FL 32837

U.S.A.

Table of Contents

Specifications .............................................................................................................................5

Fixture Overview.......................................................................................................................5

Physical.....................................................................................................................................5

Lamp Source.............................................................................................................................5

Environmental...........................................................................................................................6

Electrical ...................................................................................................................................6

Control ......................................................................................................................................6

Optics........................................................................................................................................6

Gobo / Color Size......................................................................................................................6

Rigging......................................................................................................................................6

Unit Parts.....................................................................................................................................7

Unpacking ...................................................................................................................................8

Power...........................................................................................................................................9

Voltage Selection......................................................................................................................9

Lamp..........................................................................................................................................10

Lamp Installation.....................................................................................................................10

Lamp Alignment......................................................................................................................11

Mounting ...................................................................................................................................11

Data Link DMX-512 ...................................................................................................................12

Data Terminator......................................................................................................................12

Adapter 5-to-3 pin ...................................................................................................................12

Control Panel Menu..................................................................................................................13

Start Address............................................................................................................................13

Example..................................................................................................................................13

DMX-512 Channels ...................................................................................................................14

CH 1-4 : Pan / Tilt Movement..................................................................................................14

CH 5 : Movement Speed Pan/Tilt..........................................................................................15

CH 6 : Control Reset/Lamp...................................................................................................15

CH 7 : Focus.........................................................................................................................15

CH 8 : Color Wheel 1............................................................................................................16

CH 9 : Color Wheel 2............................................................................................................17

CH 10 : Prism..........................................................................................................................17

CH 11 : Fixed Gobo Wheel.....................................................................................................18

CH 12 : Rotating Gobo Wheel.................................................................................................18

CH 12 : Rotating Gobo Wheel.................................................................................................19

CH 13 : Gobo Rotation & Index...............................................................................................19

CH 14 : Iris..............................................................................................................................20

CH 15 : Zoom..........................................................................................................................20

CH 16 : Shutter .......................................................................................................................20

CH 17 : Dimmer ......................................................................................................................20

Photometric Charts ..................................................................................................................21

Installing Gobos........................................................................................................................22

DMX-512 Background...............................................................................................................23

Maintenance..............................................................................................................................24

Troubleshooting .......................................................................................................................25

Wiring Diagram.........................................................................................................................26

Accessory Items.......................................................................................................................27

Specifications

Fixture Overview

•Pan range of movement: 530 degrees

•Tilt range of movement: 280 degrees

•High resolution 16 Bit Pan/Tilt movement for accurate positioning

•Pan/Tilt motor speed

•Consistent & auto correcting Pan/Tilt positioning

•Color wheel with 9 dichroic colors plus open

•Color wheel with continuous rotation for rainbow effect

•Additional color wheel with 9 dichroic colors plus open

•Remote lamp on and off

•Remote reset

•UV black light effect

•3-facet rotating prism, variable speed in both directions

•Static effect/gobo wheel with 9 gobos plus open

•Gobo wheel with 6 rotating, indexable and interchangeable gobos plus open

•Gobo wheel with continuous rotation

•Remote selection of stepped zoom degrees: 15°, 18°, 22°

•Motorized focus

•Motorized iris

•Variable shutter for strobing effects and quick blackouts

•Motorized dimmer from 0 to 100%

•Control via DMX512 using 3 pin In/Out XLRs

•Uses 17 Channels of DMX

•Digital display for DMX addressing and fixture settings

•Ventilation via forced air

•Anti-reflective coated glass optics

•High efficiency parabolic glass reflector

•Lamp: CSR575/2SE or MSR575/2

•Luminous output: 49,000 Lux

Physical

Color Black

Width 18 in (45.7cm)

Depth 18 in (45.7cm)

Height 27 in (68.6 cm)

Weight 91 lbs (41.3 kg)

Gross Weight 103 lbs (46.7 kg)

Lamp Source

Lamp Type 575w Metal Halide Discharge

Base GX9.5

Lamps GE - CSR575/2SE or Phillips - MSR575/2

Lamp Specs 575w, 1000 Hour, 7200°K Color Temp, 49000 Lumens

Ballast Type Magnetic

Environmental

Maximum ambient temperature 105°F (40°C)

Maximum exterior surface temperature 176°F (80°C)

Minimum distance to flammable surface 3.3ft (1m)

Minimum distance to illuminated surface 4ft (1.2m)

Electrical

Factory Setting 120v 60Hz

Selectable Voltages 100v / 115v / 208v / 220v @ 50 or 60Hz

Rated Power 850W, 7A @ 120v

Fuses 15A Time Delay (Slow) Size: ¼” x 1¼”

Control

Protocol USITT DMX512 (1990)

Channels 17

Pan / Tilt Resolution16 bit

Data I/O 3 Pin XLR (Cannon)

Modes Master / Slave / DMX

Optics

Reflector High efficiency Dichroic coated Parabolic

Lenses Anti-reflective coated

Zoom 15°, 18°, 22° Stepped, Selectable Focus Correction

Gobo / Color Size

Gobo Outside Diameter 1.06” (26.9mm)

Image Diameter 0.91” (23mm)

Thickness Max 0.138” (3.5mm)

Rigging

Position Floor or Truss mount

Orientation Any

Mounting Points 2

Clamp Orientation 0°, 90°, 180°, 270°

Safety Point Eye Bolt

Unit Parts

Front panel:

10 - Mode-button

11 - Enter-button

12 - Up-button

13- Down-button

- Display

Rear panel:

5 -Power switch

6 -DMX output

7- DMX input

8- Power cord

9- Fuse holder

1- Moving head

2- Yoke

3- Carry handles

4 - B a s e

Unpacking

Immediately upon receipt, carefully unpack and inspect the fixture to verify that all parts are

present and have been received in good condition. If any parts appear damaged from shipping

or the shipping carton shows signs of mishandling, retain all packing material for inspection and

notify the shipper immediately. Save all original packing and carton. In the event that the

merchandise is to be returned, the original carton and packing must be used. The customer will

be billed for a new carton and packing if merchandise is received without the original carton and

packing. The plastic bag shipped with the fixture can be used to keep the fixture clean if stored

or installed in a temporarily dusty environment. Do not operate fixture with plastic bag in place.

Save Shipping Materials

The packing and carton are designed to provide the fixture with protection during

shipping. Save original packing and documentation for warranty, service and return

issues. Additional charges will be applied to return items not received in original or

incomplete packing.

Claims

Physical damage must be reported to the Freight Carrier or Shipping Company upon

receipt of merchandise. Damage incurred in shipping is the responsibility of the Freight

Carrier or Shipping Company. It is the customer's obligation in the event that

merchandise is received damaged caused by shipping to notify the Freight Carrier or

Shipping Company immediately. All other claims not related to damage incurred during

shipping must be made to the Dealer or Distributor within 7 (seven) days of receiving

merchandise.

Returns

Returned merchandise must be sent prepaid, in the original packing with a Return

Merchandise Authorization number (RMA) clearly listed on the shipping label. Items

sent by Freight Collect or without a RMA number will be refused. Call your sales person

and request a RMA prior to shipping. Be prepared to provide the model number, serial

number and a brief description of the nature of the return. Shipping damage resulting

from inadequate packaging is the customer’s responsibility. Customer will be charged

additional shipping charges to return products received in non original packing and or

cartons.

Power

Do not apply power to the fixture until input voltage setting and power source are verified.

For protection against electric shock, fixture must be connected to suitable earth ground.

Make sure fixture is cool and disconnected from power mains before any service.

The listed current rating is its average current draw under normal conditions. All fixtures must be

powered directly from a switched circuit. This fixture cannot be run on a rheostat or dimmer

circuit even if used solely for a 0% to 100% switching. Before applying power to a fixture, check

that the fixture’s input voltage matches the power source voltage. Consult a qualified electrician

if there are any concerns about proper connection to power.

Cable (EU) International

Brown

Light blue

ellow/Green

Black

White

Green

Live

Neutral

Earth

Cable (US)

Voltage Selection

Make sure fixture is cool and disconnected from power mains before any service.

This fixture ships from the factory set for 115v 60Hz operation unless otherwise specified

or marked. Before accessing the Transformer Connection, make sure fixture is cool and

physically disconnected from power mains. Remove the metal cover that extends

across the base from the Power Input to the Display. It is held by 9 Phillips screws. Two

connections must be moved to adjust input voltage and one must be moved to adjust

Line Frequency.

Transformer Ballast

Lamp

Make sure fixture is cool and disconnected from power mains before any service.

Do not touch the lamp glass with bare fingers. Wear eye protection when handling lamp.

When operating, always allow the lamp to cool at least 5 minutes before attempting to re-strike

the lamp. Not doing so can cause damage to the fixture and lamp. This fixture uses a 575w

Metal Halide Discharge lamp. Either a CSR575/2SE from GE or a MSR575/2 from Phillips can

be fitted. Both lamps have an average rated life of 1000 hours. The lamp manufacturer

determines the rated lamp life under specific test conditions. Factors such as the number of

strikes, lamp orientation, line voltage and lamp temperature all affect the actual number of hours a

lamp will operate. Lamp temperature is the most controllable and with routine cleaning and

maintenance, can be kept in the optimal range to allow the maximum possible life. As Discharge

lamps age, the glass envelope becomes weaker increasing the chance of failure due to the high

internal pressures. Rupture could result in damage to the fixture and/or injure people nearby.

Lamp manufacturers state operating a lamp beyond its rated number of hours constitutes a

considerable risk for lamp rupture. Lamp manufacturers recommend lamps be replaced once the

rated life of a lamp has been reached.

Lamp Installation

1. Physically disconnect fixture from power mains.

2. Locate the Lamp Cover. Do not proceed until the Lamp Cover is cool to touch.

3. Remove the 3 fastening screws labeled X, Y and Z.

4. Carefully draw out Lamp Cover and lamp. Remove old lamp (if installed). Never

handle lamps with bare hands. Dispose of lamp properly.

hilli

s screws "X,Y,Z"

amp cover

5. Insert new lamp into socket. Ensure lamp is properly seated.

6. Carefully replace Lamp Cover and lamp. Ensure that lamp wires are not pinched or in

contact with the lamp when the Lamp Cover is fully installed.

7. Replace the 3 fastening screws labeled X, Y and Z.

Ce manuel convient aux modèles suivants

Table des matières

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur