TPC L600-LED Manuel utilisateur

L600-LED Operatory Light

Installation and Operation Manual

TPC

851 S. Lawson St

City Of Industry, CA 91748

P. 626-810-4337 Fax 626-810-4245

Table on Contents:

General information

Installation

Overview of components

Operation instructions

Light head and vertical arm adjustment

Replacement Parts List

Cleaning & disinfection guide

Warranty

Troubleshooting Guide

Technical Assistance is available Monday through

Friday, 8:00 AM to 5:00 PM PST.

800 560 82222

SYMBOLS

DANGER

The paragraphs marked with this symbol contain instructions

which must be followed carefully to avoid damaging the device,

the operator and the patient.

WARNINGS

These instructions warn the operator that it is mandatory to operate

with utmost care to avoid situations which could damage the device.

RESTRICTION

This icon indicatesthe most appropriatebehavior to avoid damaging the

device.

RECOMMENDATIONS

This icon indicates useful details for an effective use of the device.

Dispose of the device according to the regulations on separate waste

collection of electrical equipment. Directive WEEE 2012/19/EC

Class II device.

Refer to the documentation enclosed..

SERIAL NUMBER

ITEM CODE

STERILISATION

RELA TIVE HUMIDITY

ATMOSPHERIC PRESSURE

TEMPERATURE

Danger warning symbol

SWITCH SYMBOLS

SENSOR

OFF

ADJUSTMENT

Specications

Input Voltage : AC 24V Frequency: 50/60Hz

Power : 28W Illumination: 8000-23000 Lux

Color Temperature: 4000-5000 K can be adjustable

Spot Size: 80 * 160 mm (Distance for 700mm)

Package Contents

1. Light Arm

2. Power Supply

3. Light head (Seperate Box)

4. Lght head handles (Included In Light Head Box)

5. Manual

Installation Instructions

1. Install Light arm to light post. 1 11/16” Nylon

light post bushing is required for a proper t.

4. Connect power from light arm to light head

harness.

2. Remove adaptor bushing from light arm.

3. Attach adaptor bushing to light head.

5. Secure light head to arm using the alllen screw

removed in step 2.

6. Attach light handles to the light head.

Overview of Controls

On/O switch: Toggle in either

direction “Le” or “Right”

to turn the light to the “ON”

position.

Press and hold in either direc-

tion to increase or decrease the

intensity of the light.

Note: when the light is pow-

ered “o” the light inensity

remains at the last setting.

Touch Sense: Gently place your

palm on the back of the light

towards the bottom of the back

cover. is will turn the light

on and o.

Leave hand on touch sense pad

and the intensity of the light

will adjust. When you remove

your palm from the back the

intensity adjustment will stop.

Note: when the light is pow-

ered “o” the light inensity

remains at the last setting.

FEATURES

Versions

• “EDI LED” head can be supplied in the following versions:

• Head with switch

• Head with switch + automatic lighting function

• Head with con proximity sensor

• Head with switch + automatic lighting function

• Light source consisting of two LEDs whose light is mirrored into two parabolic reectors.

• Reecting surfaces with parabolic reectors which allow obtaining a regular uniform spot light at all lighting

levels and to uniformly distribute the light in the operating eld with no shadows or dark areas created by the

operator.

• Light intensity adjustment using a mechanical switch or with a sensor.

• Sensor enables the light to be switched on or o without direct contact, eliminating therefore the possibility

of cross-infection.

• “Automatic lighting” function allows the lamp to get switched on automatically whenever the power is en-

abled.

• Easy maintenance thanks to the application of new technology that takes into consideration various require-

ment in terms of safety, ergonomics and hygiene.

• Removable handles for sterilization

• Front screen lower signicantly internal contamination of the device.

• Electrical connection - Follow the wiring diagrams

Vertical Arm Adjustment

If you experience a downward dri with your operatory lights’ verti-

cal arm please follow the procedure below.

• Remove the end cap cover on the end of the vertical arm closest to

the light head. is requires a small Phillips screw driver.

• Turn the nut located at the end of the light arm to adjust the ten-

sion.

• Turn the nut clockwise to increase the tension. Turn the nut

counter clockwise to decrease the tension.

• If your vertical light arm dris down then you need to increase the

tension.

• If the vertical light arm dris back up you need to adjust the fric

tion screw. Only adjust the friction screw in quarter turns.

Tension Nut Friction Screw

Cleaning and Disinfecting Guide

*e Manufacturer makes no representation as to the disinfectant ecacy of these products. We make no war-

ranty expressed or implied that these disinfectants will not damage the surface nishes. Damage and discolor-

ation of the surface nishes are not covered under the warranty. Iodophor based disinfectants will cause yellow

staining on many surfaces. Regular washing with soap and water will minimize this staining. Iodophor neutraliz-

ers such as Promedyne are also available.

Unacceptable Disinfectants

ese disinfectants will harm the surface

nishes of dental equipment and are not

recommended.

Use of these products will void your

warranty.

Chemical Composition / Trade Names

Strong Phenols / Lysol, Lysol 2, Lysol

Phenol Alcohol Professional, Coe Foam, Coe

combinations Spray Pump, Vitaphene, Omni II

Sodium Hypochlorite / Clorox, Ajax, Purex

Household Bleach

Alcohol

Household Cleaners

Conditionally Acceptable Disinfectants

ese disinfectants have been found to be the

least

harmful to the equipment surfaces by our test

methods.

Chemical Composition Trade Names

Iodophors Biocide, Aseptic IDC,

Wescodyne, SD5, Promedyne,

Iodo Five

Mild Phenols Procide ES, Asepti Steryl

Aerosol

Glutaraldehyde / Sterall Spray, Coldspor

Phenol Sprays

Synergized Super Dis cide, Cavicide,

Kleenaseptic

Quat

Phenol/Water Sprays Top Cide, Sporicidin Pump

Spray

Birex se

Warranty Information

LED Operatory lights are guaranteed to be free from defects in workman-

ship and materials for a 2 years from date of purchase, unless otherwise

stated. TPC will repair or replace any defective “part” at no charge. TPC

will not be responsible for labor charges or shipping charges to / from the

TPC facility. is guarantee does not cover normal wear or stains on sur-

face nish. e guarantee does not cover damage resulting from improper

installation, misuse or accidents incurred in shipping and handling. All

claims against the freight carrier must be initiated at the time the damaged

items are received. e claim is the responsibility of the customer. We are

improving our products on a continuous basis. We reserve the right

to make modications without the need for prior notication and are not

obliged to modify previously manufactured items. Light bulbs are not

covered under any type of warranty. Only authorized service technicians

should attempt to service TPC equipment. Service performed by any unau-

thorized technician may result in a voided warranty.

Problem Cause Solution

Light does not illuminate No power to light Check power

LED has expired Replace LED

Transformer is expired Replace transformer

Light turns on and o then

the light head is moved

Open in line power check light head to ridge arm con-

nector. Inspect arm wire.

Vertical arm dris down Tension needs to be increased in

arm

tighten arm tension adjustment

Verticle arm dris up Friction arm adjustmnet loose Tighten friction arm adjustment

Light dris from le to right Light post not level Level unit / light post

Troubleshooting guide

Table des matières

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur