FEATURES & OPTIONS
Front - With dierent colors, it is possible to give TP200 your own
unique expression. The front (oponal) can be removed and changed
to another color. (Always supplied with Black front)
Wall Bracket - In the need of hanging your TP200 on the wall? you
can use OP201 (oponal accessory)
Table Stand - Mandatory in the box with TP200
Remotecontrol - TPR1 (oponal accessory) allows you to remotely
control volume and other funcons. Enable the patented HDSX® func-
on which is an audio feature that expands the stereo image.
Or adjust the loudness and other funcons
With the remote control, these funcons are available.
HDSX® On/O
Source toggle
Loudness adjust
TTC - Tone Tilt Control
Bluetooth - Play/Pause/Forward/Back
Mute/Sub-bas On/O
Volume up/down
Limiter - To protect the devices and drivers, TP200 has a built in li-
miter, which prevents damaging the speaker at high volume. - This is
warned with ashing red light in the indicator.
Dynamic Loudness - Controlled by the built-in DSP
Soware for adjusng / Update is available for download on our website:
www.tptube.dk/en/customer-service/download/
SETUP & installaon
- Connect TP200 to a computer with USB cable.
- Download the soware ”TP_TubeSetup”
- Install - follow the video guide on the website, if necessary.
- Open the setup program.
With the program, this can now be changed:
Loudness
Tone Tilt Control
HDSX on / o
5 band Equalizer
Auto Level - Analog
Remote click
Reset to Factory Sengs
- These funcons can be changed ”live” while playing on the speaker.
On the remote control (TPR1) the same funcons are available (equalizer,
auto level and remote click excluded), but the entered sengs, changed
in the setup program, will be Your own sound prole and the default set-
ng on the remote’s ”reset buon” - Factory sengs - see page 3
Soware update
- Latest soware is downloaded -and installed along with the SETUP pro-
gram on: www.tptube.dk/kundeservice/download/
- Connect TP200 to computer with USB cable.
- Open the ”Firmware Update” program.
- Driver will now automacally update (wait unl this is nished!)
- Then press ”UPDATE” and the updateprogress starts - speaker turns o
and then on again.
- Your TP200 is now updated and ready to use.
See also our FAQ på www.tptube.dk/en/faq/
ADJUSTMENT & UPDATE
5 6
