TP-Link PHAROS SERIES Guide de démarrage rapide

Autres manuels pour PHAROS SERIES

4

Ce manuel convient aux modèles suivants

3

Table des matières

Autres manuels TP-Link Point d'accès sans fil

TP-Link

TP-Link Auranet EAP110 Manuel utilisateur

TP-Link

TP-Link TL-PA4010 Manuel utilisateur

TP-Link

TP-Link Omada EAP620 HD V2 Manuel utilisateur

TP-Link

TP-Link ARCHER-MR400 Manuel utilisateur

TP-Link

TP-Link Auranet EAP320 Manuel utilisateur

TP-Link

TP-Link Omada EAP773 Manuel utilisateur

TP-Link

TP-Link Omada EAP653 Manuel utilisateur

TP-Link

TP-Link Deco E4/W2400 Manuel utilisateur

TP-Link

TP-Link Omada EAP610 Manuel utilisateur

TP-Link

TP-Link Auranet EAP110 Manuel utilisateur

TP-Link

TP-Link AP8635-I Manuel utilisateur

TP-Link

TP-Link Auranet EAP120 Manuel utilisateur

TP-Link

TP-Link TL-WA1201 Manuel utilisateur

TP-Link

TP-Link TL-WA7210N Manuel utilisateur

TP-Link

TP-Link Deco BE85 Manuel utilisateur

TP-Link

TP-Link Omada Pro Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

TP-Link

TP-Link omada EAP110-Outdoor Manuel utilisateur

TP-Link

TP-Link TL-WA7210N Manuel du propriétaire

TP-Link

TP-Link Auranet EAP120 Manuel utilisateur

TP-Link

TP-Link Omada EAP225 Manuel utilisateur

TP-Link

TP-Link AURANET CAP300-Outdoor Manuel utilisateur

TP-Link

TP-Link Auranet EAP115 Manuel utilisateur

TP-Link

TP-Link TL-WA7510N Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

How to Upgrade the Firmware of Pharos Series Product

Notice:

●After you downloaded the firmware from TP-LINK website, please use decompression software,

such as WinZIP or WinRAR to extract the firmware file to a folder;

●Do NOT turn off the power or cut down the Ethernet cable during upgrade process;

●It is recommended to upgrade the firmware via Ethernet cable connection but not wireless

connection;

●It is recommended to back up the current settings so you can restore the settings manually after

the upgrade.

●It is recommended to upgrade the firmware with Chrome and Firefox.

There are two methods to upgrade the firmware:

1) Upgrade the firmware via web management page of the PharOS devices.

2) Batch upgrade the firmware via centralized management software Pharos Control.

When you have many Pharos series devices that need to be upgraded, the Method 2 is recommended,

since it supports batch and scheduled upgrade; while if you have only one or two Pharos series

devices, you can choose method 1).

Preparation:

1. Please verify the product model and the hardware version of your device from the label on the

bottom of the device to make sure you are using the correct firmware. Wrong firmware

upgrading may damage your device and void the warranty.

If there is no hardware version indicated on the label as seen above, it means it is the first

hardware version (V1).

2. Find and download the corresponding firmware according to the model number and hardware

version from the TP-LINK official website http://www.tp-link.com/en/support.html. And then

extract the bin file.

Note: Please search the product with the model number and find the firmware on the support

page.

Method 1: Upgrade the firmware via web management page

Step 1 Enter the IP address of the device (Default: http://192.168.0.254) into the address bar of the

web browser such as Chrome, Firefox. Then log into the TP-LINK Pharos device with your Username

and Password.

Note: If you have changed the IP address manually or allocate an IP address automatically via

the DHCP server, please use the changed IP address.

Step 2 Navigate to the System tab, at the Firmware Update field, click the Browse button to choose

the firmware you already extracted in the folder.

Step 4 Click the Upload button. A pop-up window will provide you three options:

1) Keep: keep your current configurations after the upgrade

2) Restore: restore to factory default after the upgrade

3) Cancel: cancel the upgrade.

Click Keep or Restore as needed to perform firmware upgrade.

Step 5 Wait for the upgrade to complete. After the upgrade, the device will reboot automatically.

Step 6 Log into the devices again, navigate to the Status tab, and check the Firmware Version to see

whether the device has been upgraded successfully.

Method 2: Upgrade the firmware via Pharos Control

Step 1 Install and run Pharos Control in your host, then open the web interface of Pharos Control and

manage the devices need to upgrade firmware. For detailed information about how to make it please

refer to Pharos Control User Guide.

You can download the Pharos Control from the website below, it support Windows and Linux

operation system.

http://www.tp-link.com/en/products/details/cat-37_Pharos-Control.html

Note: before you upgrade the firmware, please make sure the devices’ status is Managed as shown in

the picture above.

Step 2 Navigate to the Firmware tab, and click on the Add icon, then it will pop out the window to

Add Firmware. You can click the Browse button to choose the firmware you already extracted in the

folder.

When you upload the firmware successfully, you will see it in this tab.

Step 3 Navigate to the Device tab, check the devices that need to be upgraded and click on the

Upgrade icon, then it will pop out the window of Upgrade Confirmation. You can choose the

firmware you have uploaded to upgrade.

Step 4 Wait for the upgrade to complete, during the time the status will show as Upgrading.

Step 5 After the upgrade complete, the status will show as Managed again. You can check in the

Version tab to see whether the devices have been upgraded successfully.