TP-Link TL-PS110U Manuel utilisateur

Quick Installation Guide

TL-PS110U

Single USB2.0 Port Fast Ethernet Print Server

TL-PS110P

Single Parellel Port Fast Ethernet Print Server

Rev:1.0.2

7106500729

1

A Before you start, you should prepare the following items:

¾One Windows-based PC with print server setup CD

¾One printer

¾One printer cable

¾One HUB

B Wired Network with Print Server:

Printer Print Server

Computer Computer Computer

HUB

C Hardware Installation:

1 Turn off the printer’s power.

2 Connect the print server to your printer with the supplied printer cable.

3 Turn the printer’s power on.

4 Plug the AC power adapter into the power connector on the print server.

5 Wait 10 seconds as part of the print server’s Power On Self Test (POST).

D Software Installation:

1 To enable network communication with print server, your computer must have a

proper IP address, e.g. 192.168.0.100. If you need an instruction to configure the

IP address of your computer, please refer to the Appendix of this Quick

Installation Guide.

2

2 Insert the setup CD into your CD-drive. The auto-run program will be started.

3 Select the model of your print sever to begin the setup. For example,if your print

sever model is TL-PS110P,please select TL-PS110P.

4 Choose Setup Wizard to install the print server and configure the connected

printer.

3

5 Click

Next, the wizard will automatically discover the print server.

6 From the

Select A Print Server screen, select the print server that you want to

configure and click Next.

7 On the Change Settings screen, select No or Yes:

4

Click No if you want the print server to keep using the default IP address and keep

the default settings, and then click Next.

¾IP address: 192.168.0.10

¾Subnet Mask: 255.255.255.0

Click Yes if you want change IP address to the print server, and then click Next.

Note:

The IP address of print server must be within the same subnet as your network

adapter.

8 On the

Select A Printer screen, select an already configured printer from the list,

click Next and then Finish to complete the installation. or Select Add New

Printer if the print server is connected to a printer that hasn’t been installed

before and does not appear in the list.

5

9 Click

Add New Printer to launch Windows Add Printer Wizard.

10 Click Next and select Local Printer, make sure the Automatically detect and

install my Plug and Play printer check box is NOT checked. Then click Next.

6

11 Make sure the Use the following port radio-button is clicked and select LPT1:

(Recommended Printer Port) from the pull-down list. Then click Next.

12 Select Manufacturer and Printer from the lists of printer’s driver. Then click

Next.

7

13 If you already have the printer’s driver installed, you will be asked whether to

keep it or to replace it. Click Next. Supply a name for the printer and choose

whether you want to make it your default printer. Then click Next.

14 Then, choose whether you want to share the printer with other network users,

print a test page (please select No.), etc. Select the appropriate radio-button and

click Next and Finish.

15 In the setup wizard, finish the installation by highlighting the installed printer in

the Select a Printer list and click Next -> Finish.

8

16 From Windows system, go to start -> Printers and Faxes and highlight your

newly installed printer.

17 Right-click, select Properties -> Ports and verify that the print server’s port

appears.

9

18 Go to General; click Print Test Page to verify the configuration.

19 Done.

Note:

If you wish to install more print servers, start setup wizard from your Windows Start

menu: start -> All Programs -> Network Print Server -> PSWizard and repeat the

installation procedure.

Autres manuels pour TL-PS110U

2

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels TP-Link Serveur d'impression

TP-Link

TP-Link TL-WR2543ND Guide de l'utilisateur

TP-Link

TP-Link TL-PS110P Manuel utilisateur

TP-Link

TP-Link TL-PS210U Manuel

TP-Link

TP-Link TL-WPS510U Manuel utilisateur

TP-Link

TP-Link TL-PS110U Manuel utilisateur

TP-Link

TP-Link TL-WPS510U Manuel utilisateur

TP-Link

TP-Link TP-PS110U Manuel utilisateur

TP-Link

TP-Link TL-PS110P Manuel utilisateur

TP-Link

TP-Link TL-WPS510U Manuel utilisateur

TP-Link

TP-Link TL-WPS510U Manuel utilisateur

TP-Link

TP-Link TL-WPS510U Manuel utilisateur

TP-Link

TP-Link TL-PS110P Manuel utilisateur

TP-Link

TP-Link td-w8970 Guide de l'utilisateur

TP-Link

TP-Link TL-PS110U Manuel utilisateur

TP-Link

TP-Link TL-PS110P Manuel utilisateur

TP-Link

TP-Link WPS510U Manuel

TP-Link

TP-Link TL-PS310U Manuel

TP-Link

TP-Link TL-WPS510U Manuel utilisateur

TP-Link

TP-Link TL-PS210U Manuel utilisateur

TP-Link

TP-Link TL-WR842ND Guide de l'utilisateur

Manuels Serveur d'impression populaires d'autres marques

Digitus

Digitus DN-13003-1 Manuel utilisateur

Edimax

Edimax PS-1206PWg Manuel utilisateur

Intellinet

Intellinet 509077 Manuel utilisateur

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Manuel utilisateur

Buffalo

Buffalo LPV4-U2-300S Manuel utilisateur

Zonet

Zonet ZPS1000 Manuel utilisateur

TRENDnet

TRENDnet TEW-P11G Manuel utilisateur

Axis

Axis 140 BJC Manuel utilisateur

HP

HP Jetdirect 280m - 802.11b Wireless Print... Manuel utilisateur

MicroNet

MicroNet SP766W Manuel utilisateur

NETGEAR

NETGEAR PS104 - Hub - EN Manuel utilisateur

Axis

Axis AXIS 1610 Manuel utilisateur

Buffalo

Buffalo LPV4-U2-300S Manuel utilisateur

Axis

Axis 5600+ Manuel utilisateur

LevelOne

LevelOne WPS-9123 Manuel utilisateur

NETGEAR

NETGEAR PS105 Manuel utilisateur

Xerox

Xerox FreeFlow Print Server V9 SP3 Manuel utilisateur

SEH

SEH primos Manuel utilisateur