TP-Link UB400 Manuel utilisateur
How to pair PC and PS4 controller using
UB400?
Configuration Guide
Updated 12-23-2019 09:39:38 AM 3363
This Article Applies to:
For most Bluetooth devices, a computer can find them after UB400 installed successfully. But
when you want to pair your PC and PS4TM controller, you need to install the extra application
RemotePlayInstaller.exe from Sony. Follow the steps below.
Before connecting your PS4TM controller with PC using UB400, refer to
https://remoteplay.dl.playstation.net/remoteplay/lang/gb/index.html and follow the initial setup.
Make sure you install the application RemotePlayInstaller.exe for Remote Play.
Then, follow the steps below to pair your computer with PS4TM Controller using UB400.
Note: UB400 is only compatible with Windows OS.
For Windows 8 and above system:
There is no need to install the Bluetooth driver manually. Insert UB400 and pair your PC with
controller. Then follow the steps below.
1. Double-click the Bluetooth icon on the menu.
2. For Windows 8/8.1, skip this step. For Windows 10, click Add Bluetooth or other device to
scan for your controller.
3. Select your device from the list and follow the onscreen instructions to complete pairing.
For Windows XP and Windows 7:
You need to install the driver for UB400 before you pairing your computer and controller with
UB400. Follow the steps below.
1. Download the driver for UB400, unzip the folder and start the installation by clicking
Setup.exe, and select the language and click OK.
2. When the welcome window appears, click Next.
3. Confirm that you agree with the terms of the License Agreement and click Next.
4. Select the installation folder and click Next.
5. Change Discovery Mode to Discovery ON, select Device Type: PC/Desktop, and it’s
recommended to keep the original value of SCMS-T. Click Next.
6. Click Install to begin the installation.
7. When the finish screen appears, click Finish.
8. Restart your computer. After restarting the computer, you will find a Bluetooth icon in the
menu bar, which means the driver has been installed successfully.
9. Right-click the Bluetooth icon in the menu bar and select Add Bluetooth Devices.
10. Select the controller from the list and click Next.
11. Click Finish when completing the pairing.
Common problems and troubleshooting
when using UB400 and UB4A
Q&A of functional explanation or specification parameters
Updated 12-27-2019 09:33:14 AM 29203
This Article Applies to:
We could possibly encounter various kinds of problems when using UB400/UB4A with
Windows PC. This article aims to teach you how to do the troubleshooting.
Q1: Do you have any installation tips to get this Bluetooth adapter works well?
1. UB400/UB4A supports Plug & Play on Windows 10 computer. If not, please download the
driver from the official website and install it manually.
2. DISABLE the built-in Bluetooth before using UB400/UB4A if your computer has the
built-in Bluetooth.(Open Device Manager and right click on the built-in Bluetooth adapter
of your PC and then click Disable device)
3. To properly use UB400/UB4A, please remove all third-party Bluetooth driver or program,
especially CSR harmony software.
Q2: My Bluetooth adapter is successfully installed but I cannot see the Bluetooth icon in
the lower right corner of the Desktop
Please follow the below steps to find the Bluetooth icon.
1. Go to Control panel > Network and Internet > Network and Sharing Center
2. Click on Change Adapter Settings. Then right click on the Bluetooth network > Properties
3. Select the Bluetooth tab, select the Bluetooth Setting, and tick up Show the Bluetooth icon
in the notification area.
4. The Bluetooth icon will be recovered and you can see it in the lower right corner of the
Desktop.
Q3: What if my PC can’t recognize UB400/UB4A when I plug it in? (There is no Bluetooth
Radios symbol in Device Manager)
(1) UB400/UB4A only supports Windows OS. For windows 8 and above system, there is no need
to install Bluetooth driver, but for Windows XP and Windows 7, you need to install the
Bluetooth driver first.
(2) Try to insert UB400/UB4A into a different USB port on your computer. For Windows XP/7,
try to restart the computer after installing the driver. If it still doesn’t work, please try to
uninstall and reinstall the driver.
(3) Make sure there are no other Bluetooth devices on the computer. If there are, disable all existing
Bluetooth devices in Device Manager, then insert the adapter and try again.
(4) Click Computer Management > Services and Applications > Services > Bluetooth support
Service, double-click on the Startup type to change to Automatic, and the service status to
Start.
Autres manuels pour UB400
6
Autres manuels TP-Link Adaptateur
TP-Link
TP-Link TL-PA9020P Manuel utilisateur
TP-Link
TP-Link TL-WPA8630 Manuel utilisateur
TP-Link
TP-Link TL-WPA7517 Manuel utilisateur
TP-Link
TP-Link Archer TX50UH Manuel utilisateur
TP-Link
TP-Link Archer T2U Manuel utilisateur
TP-Link
TP-Link Archer T4U Manuel utilisateur
TP-Link
TP-Link UE306 Manuel utilisateur
TP-Link
TP-Link TL-PA201 STARTER Manuel utilisateur
TP-Link
TP-Link TL-WN722N Manuel utilisateur
TP-Link
TP-Link TL-PA6010 Manuel utilisateur
TP-Link
TP-Link UE200 Manuel utilisateur
TP-Link
TP-Link TPL-202E Manuel utilisateur
TP-Link
TP-Link UE200 Manuel utilisateur
TP-Link
TP-Link TL-PA4015P Manuel utilisateur
TP-Link
TP-Link Powerline 1XRJ45 Manuel utilisateur
TP-Link
TP-Link TL-WDN3200 Manuel utilisateur
TP-Link
TP-Link UB400 Manuel utilisateur
TP-Link
TP-Link TL-WN951N - IEEE 802.11b/g 802.11n Draft 2.0 PCI Wireless... Manuel utilisateur
TP-Link
TP-Link TX20U Nano Manuel utilisateur
TP-Link
TP-Link Archer TX50E V1 Manuel utilisateur
