TP-Link TF-3200 Manuel utilisateur

User Guide

TF-3200

10/100M PCI Network Adapter

Rev:1.0.0

7106500752

Specifications are subject to change without notice.

is a registered trademark of TP-LINK

TECHNOLOGIES CO., LTD. Other brands and product names

are trademarks or registered trademarks of their respective

holders.

No part of the specifications may be reproduced in any form or

by any means or used to make any derivative such as

translation, transformation, or adaptation without permission

http://www.tp-link.com

FCC STATEMENT

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to pro-vide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not in-stalled and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

¾Reorient or relocate the receiving antenna.

¾Increase the separation between the equipment and

receiver.

¾Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

¾Consult the dealer or an experienced radio/ TV technician

for help.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

1) This device may not cause harmful interference.

III

2) This device must accept any interference received, including

interference that may cause undesired operation.

Any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority

to operate the equipment.

CE Mark Warning

This is a Class B product. In a domestic environment, this

product may cause radio interference, in which case the user

may be required to take adequate measures.

Package Contents

The following contents should be found in your package:

¾OneTF-3200 10/100M PCI Network Adapter

¾One resource drivers CD for TF-3200

¾The other helpful information

Note:

Make sure that the package contains the above items. If any of

the listed items are damaged or missing, please contact with

your distributor.

Safety Notices

Do not use this product near water, for example, in a wet

basement or near a swimming pool. Avoid using this product

during an electrical storm. There may be a remote risk of electric

shock from lightning.

Chapter 1 Introduction

1.1 Overview of the product

The TF-3200 10/100M PCI Network Adapter is a highly

integrated and cost-effective Fast Ethernet Adapter that provides

32-bit performance, PCI bus controller, and full compliance with

IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX specifications

and IEEE 802.3x Full Duplex Flow.

The TF-3200 keeps low cost and eliminates usage barriers. It is

the easiest way to upgrade a network from 10 to 100Mbps.

Supports both 10Mbps and 100Mbps network speed both in

Half-Duplex and Full-Duplex transfer modes, using

Auto-Negotiation technology to detect the network speed. It also

can be widely used in most modern Operating System.

1.2 Features

¾Comply with IEEE 802.3 10Base-T and IEEE 802.3u

100Base-TX Ethernet standard

¾Compliant to PCI Revision 2.1/2.2

¾PCI local bus single-chip Ethernet controller

¾Supports auto MDI-MDIX Function

¾Supports ACPI, PCI power management

¾Supports Full Duplex Flow Control (IEEE 802.3x)

¾Full duplex design to double the performance

¾Supports Auto-Negotiation function

¾Supports ODI driver for NetWare 4.x, 5.x, NDIS driver for

Microsoft Windows 98SE, Windows 2000, Windows XP,

Windows Vista, etc

1.3 LED Status

The green LED indicates if the 10 or 100Mbps STP/UTP has

been link or not. When the LED radiate, it indicates the adapter

connect to the network at 10/100Mbps speed. Otherwise, it

indicates connection is not available. When the LED glitter, it

means the STP/UTP port is receiving or transmitting data.

Chapter 2 Installation Guide

2.1 Hardware Installation

To install the adapter, follow these steps listed below:

1. Turn off your computer and unplug the power cord and all

cables.

2. Remove your computer’s case cover. See your computer’s

user guide for information about removing the cover.

3. Locate an available PCI slot. PCI slot are usually white.

4. Remove the screw that secures the backplate (the small

piece of metal that covers the opening for PCI card on the

back panel of your computer), then remove the backplate.

5. Carefully insert the adapter into the PCI slot. Do not touch

the metal connector on the adapter.

6. Secure the adapter to the case using the screw you

removed from the backplate.

7. Reinstall your computer’s case cover.

8. Plug in the power cord and other cables, and then turn on

your computer.

2.2 Driver Installation

Use the drivers supplied by the diskette included in the product.

For detail description, please refer to "readme.txt" according to

the corresponding OS.

Appendix A Specifications

Normal

Interface 32-bit PCI interface

Standards IEEE 802.3 10Base-T, IEEE 802.3u

100Base-TX

Software

ODI driver for NetWare 4.x, 5.x,

NDIS driver for Microsoft Windows

98SE, Windows 2000, Windows XP,

Windows Vista, etc

Transmission Rate 10Mbps, or 20Mbps. 100Mbps or

200Mbps

Hardware IBM PC compatibles(it must have

PCI slot)

Connector Supported RJ45

IRQ Line Assigned by system

Topology Star

I/O Address Assigned by system

Environmental and Physical

Operating Temp 0℃~40℃(32℉~104℉)

Storage Temp -40℃~70℃(-40℉~158℉)

Operating Humidity 10% ~90%, Non-condensing

Storage Humidity 5%~95%, Non-condensing

Autres manuels pour TF-3200

Table des matières

Autres manuels TP-Link Adaptateur

TP-Link

TP-Link TL-WPA8630 Manuel utilisateur

TP-Link

TP-Link TL-WN822N Manuel utilisateur

TP-Link

TP-Link TL-PA9020 Manuel utilisateur

TP-Link

TP-Link TL-WN822N Manuel utilisateur

TP-Link

TP-Link TL-WN881ND Manuel utilisateur

TP-Link

TP-Link TL-PA9020 Manuel utilisateur

TP-Link

TP-Link TL-WN851ND Manuel utilisateur

TP-Link

TP-Link TL-WN7200ND Manuel utilisateur

TP-Link

TP-Link TL-POE150S Manuel utilisateur

TP-Link

TP-Link TL-WN725N Manuel utilisateur

TP-Link

TP-Link TL-WN725N Manuel utilisateur

TP-Link

TP-Link TL-PA411 Manuel utilisateur

TP-Link

TP-Link TL-WPS510U Manuel

TP-Link

TP-Link TL-WN725N Manuel utilisateur

TP-Link

TP-Link TG-3468 V4 Manuel utilisateur

TP-Link

TP-Link TL-PA511 Manuel utilisateur

TP-Link

TP-Link Archer T3U Plus Manuel utilisateur

TP-Link

TP-Link TL-WN727N Manuel utilisateur

TP-Link

TP-Link PG2400P Manuel utilisateur

TP-Link

TP-Link TL-WA890EA Manuel utilisateur

TP-Link

TP-Link TL-WPA7517 Manuel utilisateur

TP-Link

TP-Link TG-3468 Manuel utilisateur

TP-Link

TP-Link TL-WN323G Manuel utilisateur

TP-Link

TP-Link TPL-WN722N Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur