TP-Link Archer TX20E Manuel utilisateur
REV1.0.0 1910013263
User Guide
AX1800 Wi-Fi 6 Bluetooth 5.2 PCIe Adapter
Archer TX20E
Contents
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01
Chapter 1. Get to Know About Your Adapter . . . . . . . . . . . . . . . . . . . 02
Chapter 2. Connect to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
Chapter 3. Use Your Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
3. 1. Install Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .08
3. 2. Join a Wireless Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09
3. 3. Pair with Bluetooth Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09
3. 4. Uninstall Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09
Appendix: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
01
About This Guide
This guide is a complement to Quick Installation Guide. The Quick Installation
Guide instructs you on quick installation, and this guide provides the product
overview and more detailed instructions for each steps.
When using this guide, please notice that features available of the adapter may
vary by model and software version. It may also vary by region or ISP. All images,
steps, and descriptions in this guide are only examples and may not reflect your
actual experience.
Conventions
In this guide, the following conventions are used:
Convention Description
Underlined Underlined words or phrases are hyperlinks. You can click to redirect to a
website or a specific section.
Teal Contents to be emphasized and texts on the web page are in teal, including
the menus, items, buttons, etc.
Note: Ignoring this type of note might result in a malfunction or damage to the
device.
Tips: Indicates important information that helps you make better use of your
device.
Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications.
Actual wireless data throughput and wireless coverage, and number of connected devices are not
guaranteed and will vary as a result of network conditions, AP limitations, and environmental factors,
including building materials, obstacles, volume and density of traffic, and AP location.
Use of Wi-Fi 6 (802.11ax), and features including OFDMA, MU-MIMO, and 1024-QAM require APs to also
support the corresponding features.
HT160 requires AP device that supports 160 MHz bandwidth on Wi-Fi.
Use of WPA3TM requires APs to also support the corresponding feature.
More Info
• The latest driver can be found at Download Center at
https://www.tp-link.com/support.
• Specifications can be found on the product page at https://www.tp-link.com.
• A TP-Link Community is provided for you to discuss our products at
https://community.tp-link.com.
Chapter 1
Get to Know About Your
Adapter
This chapter introduces the detail of the adapter.
03
Chapter 1 Get to Know about Your Adapter
Archer TX20E equips your PC with more advanced Bluetooth 5.2 technology
that runs faster connection speeds and farther range compared with older
versions, ensuring a strong and stable wireless connection between your PC
and Bluetooth devices.
• Supports IEEE 802.11ax/ac/n/a 5 GHz, IEEE 802.11ax/n/g/b 2.4 GHz
• Supports Bluetooth 5.0, Bluetooth 4.2, Bluetooth 4.0
• Supports infrastructure mode
• Maximum speed of up to 2402 Mbps on 5 GHz network and 574 Mbps on
2.4 GHz network
• Supports 64/128 bit WEP, WPA/WAP2/WPA3, WPA-PSK/WPA2-PSK, 802.1x
• Windows 10 (64-bit) only
• Environment:
Operating Temperature: 0℃~40℃(32℉~104℉)
Storage Temperature: -40℃~70℃(-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Chapter 2
Connect to a Computer
This chapter introduces how to connect the adapter to your computer.
Please note that images are for demonstration only.
05
Chapter 2 Connect to a Computer
Follow the steps below to insert the adapter into your computer:
1. Turn off your computer, unplug the power cable then remove the case panel.
2. Connect the provided Bluetooth USB cable to the adapter.
Bluetooth USB cable
Adapter
3. Locate an available PCIE X1 slot t ( X1, X4 or X16) and carefully insert the adapter.
Tip:
If the bracket is not suitable for your computer, detach it from the adapter’s board and replace it with the
low-profile bracket.
06
Chapter 2 Connect to a Computer
4. Locate an available F_USB connector and carefully plug the Bluetooth USB
cable into it.
USB
USB
Note:
If the Bluetooth USB cable is not correctly connected to the motherboard, Bluetooth function won’t work
even after driver installation.
5. Connect the antenna(s) to the adapter.
Tip:
To maximize performance, make sure the path between the antenna(s) and your router is clear.
6. Replace the case panel, plug in the power cable and turn on your computer.
After connecting your adapter to the computer, follow the instructions in the
next chapter to install Wi-Fi and Bluetooth drivers.
Chapter 3
Use Your Adapter
This chapter introduces how to install or uninstall your adapter’s Wi-Fi and
Bluetooth drivers, connect to a wireless network, and pair with a Bluetooth
device on a Windows system.
This chapter includes the following sections:
• Install Drivers
• Join a Wireless Network
• Pair with Bluetooth Devices
• Uninstall Drivers
08
Chapter 3 Use Your Adapter
3. 1. Install Drivers
1. Insert the CD and run the Autorun.exe.
Note: You can also check the new release and download the driver at
https://www.tp-link.com/support/download/
2. Install the Wi-Fi and Bluetooth drivers.
Note:
· DO NOT install the Bluetooth and Wi-Fi drivers simultaneously. If one driver is being installed, please wait
until it is finished, then install the other driver.
· If an unknown publisher message pops up, select Ye s to continue.
· If Windows User Account Control requires admin credentials, type user name and password of your
Windows administrator account.
• Wi-Fi: Click and follow the on-screen instructions to complete the Wi-Fi
installation.
• Bluetooth: Click and follow the on-screen instructions to complete the
Bluetooth installation.
Note: To check if the drivers are installed successfully or not , refer to How to check if I have installed
the drivers successfully or not?
3. 2. Join a Wireless Network
1. Click the icon ( Wireless Network ) on the taskbar.
2. Select your Wi-Fi network, click Connect, and enter the password when
prompted.
Table des matières
Autres manuels TP-Link Adaptateur
TP-Link
TP-Link UE300C Manuel utilisateur
TP-Link
TP-Link TL-PA8010P Manuel utilisateur
TP-Link
TP-Link TL-WN823N Manuel utilisateur
TP-Link
TP-Link TL-WN821N Manuel utilisateur
TP-Link
TP-Link TL-WN3221G Manuel utilisateur
TP-Link
TP-Link Archer TX20U Plus Manuel utilisateur
TP-Link
TP-Link TL-WDN3800 Manuel utilisateur
TP-Link
TP-Link AV200 Manuel utilisateur
TP-Link
TP-Link TL-PA4010 Manuel utilisateur
TP-Link
TP-Link TD-W150KIT Manuel utilisateur
TP-Link
TP-Link TL-PA2030 Manuel utilisateur
TP-Link
TP-Link TL-WN827N Manuel utilisateur
TP-Link
TP-Link Archer T1U Manuel utilisateur
TP-Link
TP-Link TL-WN725N Manuel utilisateur
TP-Link
TP-Link TL-WN822N Manuel utilisateur
TP-Link
TP-Link TL-WN821N Manuel utilisateur
TP-Link
TP-Link TL-PA4010 Manuel utilisateur
TP-Link
TP-Link TL-WN727N Manuel utilisateur
TP-Link
TP-Link TL-PA2010 Manuel utilisateur
TP-Link
TP-Link TL-PA201 STARTER Manuel utilisateur
