TownSteel 2000 Series Guide de dépannage

-1-

Index

Definition··································· 02

Factory Default Setting·························03

Important Notes······························03

Change Master Code···························04

Add Code··································· 05

Add a Manager Code

Add Multiple Manager Code

Add a User Code

Add Multiple User Code

Add Service Code

Delete Code·······························07

Delete Manager Code

Delete User Code

Delete Service Code

Disable or Enable Code······················ 08

Disable or Enable A Manager Code

Disable or Enable A User Code

Disable or Enable all User Codes under the same Manager Code

Disable or Enable all User Codes under the same Manager Group

Disable or Enable all User Codes within the system

Disable or Enable all User Codes and Manager Codes within

the system

Disable or Enable Group Function·····················11

Enable or Disable Passage Mode·····················12

Enable or Disable Lock Status Indicator················12

Remote Access Terminals··························13

Disable Emergency Open Mode······················13

Revert to Factory Setting···························14

Adjust Pass time·································14

Adjust Keypad Anti-Tamper Lockout Time (Penalty Time)····14

Adjust Keypad Sound Level·························15

Code Location Function···························16

Next Free Office Code ID Locator····················16

Low Battery Warning······························17

Trouble Shooting·································17

Q & A··········································18

www.townsteel.com

-2-

Definition:

Code Length:

Emergency Open Mode:

Group Function:

LED Indicator:

Locked Mode:

Manager Code:

Master Code:

Pass Time:

Passage Mode:

www.townsteel.com

-3-

Penalty Time (Anti-T amper Lockout):

REM1:

REM2:

Service Code (One-time User Code):

User Code:

Factory Default Setting

Master Code:

Pass Time:

Penalty Time:



Important Notes:

Factory Default Master Code must be changed to your own personal Master Code before programming any other codes.

www.townsteel.com

-4-

Pressing Star (“□

*”) key cancels on-going programming.

Pressing Pound (“#”) key starts programming.

Replacing batteries does not change existing settings.

During programming, Blue LED indicator indicates either success of programming or programming in progress, and red

LED indicator indicates failure of programming.

Two blue LED flashes and 2 beeps (one short beep and one long beep) at the end of each successful program sequence.

One blue LED flashes and 2 short beeps during program sequence.

Programming can be done only if the lock is in Locked Mode.

The red LED will flash 0.5 second (with one long beep) after an invalid code is entered. (To quicklyclear an invalid UserAccess

Code, press □

*and immediately re-enter the correct Code).

Change Master Code –Program 01

Key Sequence:

□

#[Master Code] ●□

0□

1●[1-digit Code length] ●[New Master Code] ●[New Master Code] ●●

For example,if you want your own personal Master Code to be “5555”, press: □

#12345 ● 01 ● 4●5555 ●5555 ●●

Notes:

Factory Default Master Code is 12345. It’s universal and known to the public. It must be replaced with your own Master Code

immediately. Manufacture assumes no liability, direct or indirect, due to failure to do so.

No other programming commands will be accepted until Factory Default Master Code has been changed.

LengthofMasterCodedefineslengthofallother codes.Itcannotbe changedtootherlengthsunless Factory DefaultSettingisrestored.

Master Code cannot be deleted.

A lock has only one Master Code. Multiple locks can have the same Master Code.

www.townsteel.com

-5-

Add Code

Add a Manager Code –Program 02

Key Sequence

□

#[Master Code] ● □

0□

2● [2-digit Manager ID] ● [New Manager Code] ●●

For example,if you want to add Manager Code of “2000” with Manger ID 90, Press: □

#5555 ●02 ●90 ●2000 ●●

Add Multiple Manager Codes –Program 02

Key Sequence

1st Manager Code Key Sequence: □

#[Master Code] ● □

0□

2● [2-digit Manager ID] ● [New Manager Code] ●●

Additional Manager Codes Key Sequence: ● [2-digit Manager ID] ● [New Manager Code] ●●

Forexample,if you want to add Manager Codes “3000”, “4000” and “5000” with Manager ID 30, 40, and 50 respectively,

Press: □

#5555 ● □

0□

2● 30 ● 3000 ●●

● 40 ● 4000 ●●

● 50 ● 5000 ●●

Notes:

Input of additional Manager Code must start before blue LED indicator stops flashing.

Otherwise need to start from entering □

Add a User Code –Program 02

Key Sequence

□

#[Master Code] ● □

0□

2● [2-digit User ID] ● [New User Code] ●●

www.townsteel.com

-6-

For example,if you want to add User Code of “2010” with User ID 01, Press: □

#5555 ●02 ●01 ●2010 ●●

Add Multiple User Codes –Program 02

Key Sequence

1st User Code Key Sequence:

□

#[Master Code] ● □

0□

2● [2-digit User ID] ● [New User Code] ●●

Additional User Codes Key Sequence:

● [2-digit User ID] ● [New User Code] ●●

For example,if you want to add User Codes “2020”, “2030” and “2040” with User ID 02, 03, and 04 respectively,

Press: □

#5555 ● □

0□

2●02 ● 2020 ●●

● 03 ● 2030 ●●

● 04 ● 2040 ●●

Notes:

Input of additional User Code must start before blue LED indicator stops flashing. Otherwise need to start from entering □

Add Service Code 1 –Program 21

Key Sequence

□

#[Master or Manager Code] ●□

2□

1●[Enter new Service Code] ●●

For example,if you want to add Service Code 1 “9999”, Press □

#5555 ●□

2□

1●9999 ●●

Notes:

Service code is used to open the door once.

To add Service Code 2, 3, 4, or 5, replace “21” in Key Sequence with “22”, “23”, “24” and “25” respectively.

www.townsteel.com

-7-

Delete Code

Delete Manager Code –Program 03

Key Sequence

□

#[Master Code] ●□

0□

3● [2-digit Manager ID] ●●

For example,if you want to delete Manager Code “5000” with Manager ID “50”, Press: □

#5555 ●03 ●50 ●●

Delete User Code –Program 03

Key Sequence

□

#[Master or Master Code] ●□

0□

3● [2-digit User ID] ●●

For example,if you want to delete User Code “2040” with User ID “04”, Press: □

#5555 ●03 ●04 ●●

Delete Service Code

Delete Service Code 1 –Program 31

Key Sequence

□

#[Master or Manager Code] ● □

3□

1●●

For example, if you want to delete Service Code 1, Press □

#5555 ●□

3□

1●●

Notes:

To delete Service Code 2, 3, 4, or 5, replace “31” in Key Sequence with “32”, “33”, “34”, or “35”.

Delete All Service Codes –Program 30

Key Sequence

□

#[Master or Manager Code] ●□

3□

0●□

3□

0●●

www.townsteel.com

-8-

For example, if you want to delete all Service Codes, Press □

#5555 ● □

3□

0●□

3□

0●●

Disable or Enable Code

Disable or Enable a Manager Code

Disable a Manager Code –Program 04

Key Sequence

□

#[Master Code] ●□

0□

4●[2-digit Manager ID] ●●

For example,if you want to disable Manager Code “3000” with Manager ID “30”, Press: □

#[5555] ●□

0□

4●[30] ●●

Enable a Manager Code –Program 05

Key Sequence

□

#[Master] ●□

0□

5●[2-digit Manager ID] ●●

For example, if you want to enable Manager Code “3000” with Manager ID “30”, Press □

#[5555]● □

0□

5●[30] ●●

Disable or Enable a User Code

Disable a User Code –Program 04

Key Sequence

□

#[Master Code or Manager Code] ●□

0□

4●[2-digit User ID] ●●

For example,if you want to disable User Code “2030” with User ID “03”, Press □

#[5555] ●□

0□

4●[03] ●●

Notes:

Manager Code can only disable User Code under the same Manager Group.

Enable a User Code –Program 05

www.townsteel.com

-9-

Key Sequence

□

#[Master or Manager Code] ● □

0□

5●[2-digit User ID] ●●

For example, if you want to enable User Code “2030” with User ID “03”, Press □

#[5555] ● □

0□

5●[03] ●●

Notes:

Manager Code can only enable User Code under the same Manager Group.

Disable or Enable all User Codes under Same Manager Code

Disable all User Codes under Same Manager Group –Program 06

Key Sequence

□

#[Manager Code] ●□

0□

6●●

For example,if you want to disable all User Codes under Manager Group “90”, Press □

#[2000] ●□

0□

6●●

Enable all User Codes under the same Manager Code –Program 08

Key Sequence

□

#[Manager Code] ●□

0□

8●●

For example, if you want to enable all user codes under Manager Group “90”Press □

#[2000] ●□

0□

8●●

Disable or Enable all User Codes under the same Manager Group

Disable all User Codes under the same Manager Group –Program 5X

Key Sequence

□

#[Master or Manager Code] ●□

5□

x●●

Result: All User Codes in group X are disabled

Note: “X” is the group number from 0 to 9.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TownSteel Verrouillage

TownSteel

TownSteel e-Genius 2000 Series Manuel utilisateur

TownSteel

TownSteel MDE Series Manuel utilisateur

TownSteel

TownSteel e-Genius 2990 Series Mode d'emploi

TownSteel

TownSteel e-lite 4000 Series Mode d'emploi

TownSteel

TownSteel Prodigy SmartLock Interconnect 2000 Series Mode d'emploi

TownSteel

TownSteel XCE 2000 Series Manuel utilisateur

TownSteel

TownSteel e-Smart 6000 Series Manuel utilisateur

TownSteel

TownSteel e-Elite 4000 Series Mode d'emploi

TownSteel

TownSteel E-GENIUS 2000 Series Manuel utilisateur

TownSteel

TownSteel Prodigy SmartLock 4000 Series Guide de dépannage

Manuels Verrouillage populaires d'autres marques

Magic

Magic 105 Manuel utilisateur

Gantner

Gantner GAT NET.Lock 7020 System Guide rapide

Wittkopp

Wittkopp Insys 7202 Manuel utilisateur

Dorma

Dorma Studio Classic Manuel utilisateur

Securam

Securam ECSL-601 Manuel utilisateur

Sudhaus

Sudhaus 3003 Manuel utilisateur

Safety 1st

Safety 1st 48517 Manuel utilisateur

Pado

Pado FDS-10 Manuel utilisateur

Esco

Esco systeQ Series Manuel utilisateur

COMPX

COMPX National D8951 Manuel utilisateur

secureo

secureo Key Box Manuel utilisateur

Stock Loks

Stock Loks C8713 Manuel utilisateur

COMPX

COMPX 1T-058 Manuel du propriétaire

Auslock

Auslock T11 Manuel utilisateur

ELCOM

ELCOM 7205 Manuel utilisateur

Stealth SAFES

Stealth SAFES ShadowVault Manuel utilisateur

Knox

Knox KeySecure 5 Manuel utilisateur

Kwikset

Kwikset 48334/01 Manuel utilisateur