Tovatec Meganova Manuel utilisateur
CHARGE TORCH FULLY BEFORE USE:
1) Unscrew charger port cover on back of torch
body (battery comaprtment) with supplied key.
2) Attach appropriate plug version to charger.
3) Plug AC charger into electrical outlet.
4) Plug adapter into charging port on back of
torch body (battery compartment).
5) Charge 3 to 4 hours or until the red light on
charger turns to green.
6) Before use, make sure to tighten both the charger port cover (using supplied key) to
charger port and the body (battery compartment) to torch rmly. Leakage through
charger port or body due to improper usage or O-ring maintenance WILL NOT be
covered by warranty.
7) Recharge as needed or once every 3 months if not in use for long periods.
8) When charging, do not use the torch.
SWITCH OPERATION:
1) Depress power switch once for full power output.
2) Depress power switch twice for 30% power output.
3) Depress power switch 3 times for OFF.
4) Depress power switch and hold for few seconds for strobe function.
MAINTENANCE AND STORAGE:
1) Rinse thoroughly in cold water after every use.
2) After rinsing torch, be sure to wipe o any remaining water.
3) Remove charger port cover and make sure it is clean. Lightly lubricate O-rings with
silicone grease before reinstalling.
4) If body (battery compartment) is to be removed (such as for international transport)
from torch, make sure screw threads and O-rings are clean and lightly lubricate the
O-rings before reinstalling.
5) Store in a cool, dry environment.
6) When not in use, or for travel, unscrew battery slightly to prolong battery life and
avoid accidental turn on.
6) Do not disassemble torch or warranty will be voided.
INCLUDED IN PACKAGE: Meganova torch, AC charger set, key, video adapter,
silicone grease, and replacement O-rings for battery and charger port cover.
Meganova Quick Start Guide
SPECIFICATIONS:
Function:
1) Waterproof to 400 feet / 120 meters.
2) 2000 lumens at full power, 600 lumens at 30% power.
3) Color temp: 6000~7000K
4) LED life: approximately 100,000 hours.
5) Operating environment: -4°F to 113°F / -20°C to 45°C.
6) Beam angle: approximately 32 degrees.
7) Light: round dispersive light.
8) Switch: magnetic push.
9) Burn time: approximately 2 hours at full power;
approximately 12 hours at 30% power.
Material:
1) Case: 6061-T6 Aluminum.
2) Surface nish: Matte black.
3) Lens: Clear glass lens.
4) Waterproof silicone O-rings: replace as needed.
battery compartment (2) qty 45x2.3mm black color
charger port cover (2) qty 14x1.5mm blue color
Electrical data:
1) Light source: 3 CREE XM-L LED.
2) Electrical current: input 12V, current 4.5 +/- 0.5A.
3) Battery: 6 “18650” rechargeable Li-ion battery 12V
with protection circuit.
4) Charge time: approximately 3 to 4 hours.
Product net weight and dimensions:
1) Net weight: 49.4 oz +/- .35 oz (including battery), 1400g +/- 10g (including battery)
2) Dimensions: (8.0 x 3.5 x 5.3) inches, (201.7 x 88.5 x 135.2)mm
INSTALLING AND USING VIDEO ADAPTER:
1) Slide video adapter into torch handle slot.
2) Align locking screw on video adapter with screw
hole in handle.
3) Tighten locking screw with hex wrench.
4) Attach Meganova with video adapter to standard
ex arm.
Table des matières
Autres manuels Tovatec Lampe de poche
