of the Controller. Server
Port should be 7433.
NOTE: You can only connect the ACWand to a 2.4GHZ Wi-Fi network.
The name of the network should be without spaces.
6. Press and hold SW1 and click Send.
Note: Be sure to Press and Hold SW1 then click the Send key.
7. Disconnect the Power adaptor from the unit.
8. Wait 10 seconds and plug back the power adaptor.
Note: If there are more units to be configured to the same network, repeat the following
steps for a faster configuration:
After configuring the first unit in step 6, keep the browser open at 192.168.4.1/submit
1. Repeat steps 1, 2.
2. Press and hold SW1 and refresh the browser page at 192.168.4.1/submit
3. Repeat step 7.
To find your own Controller IP, go to http://www.touchwand.com/products/touchwand-wanderfull-hub/
Click "Installation manual" button. Inside the manual, go to page 6.
