Touchboards PLUS Manuel utilisateur
Captureboard
Software Operation Manual
Thank you for your purchase of this PLUS product.
Please read this Captureboard Software Operation Manual carefully before use to take
full advantage of the functions of this product. After you have finished reading the manual,
please keep it for future reference.
Table of Contents
2
(1) The contents of this manual may not be reprinted in part or whole without permission.
(2) The contents of this manual are subject to change without notice.
(3) Great care has been taken in the preparation of this manual; however, should any questionable points, errors, or
omissions be apparent, please contact us.
(4) Notwithstanding part (3), PLUS Vision Corp. will not be responsible for any claims or lost profits or other matters deemed
to be the result of using this unit.
(5) The use of a printer as the peripheral device of the PLUS Captureboard is taken to be a prerequisite; therefore, operation
will not be guaranteed when the printer is used with a direct connection to a personal computer.
(6) Manuals with incorrect collating or missing pages will be replaced.
Trademarks
* Microsoft and Windows are registered trademarks or trademarks of the Microsoft Corporation in the United States and
other countries.
* Adobe and Adobe Acrobat Reader are trademarks of Adobe Systems Incorporated.
Due respect will be afforded to the trademarks of the various companies and to product trademarks even when not expressly
noted.
In addition, product names and company names contained in this manual are registered trademarks or trademarks of the
respective companies.
Introduction ........................................................................... 3
What is Captureboard Soft? ........................................................... 3
Operating Environment ................................................................... 3
Copyright and License .................................................................... 4
Equipment Connections ....................................................... 5
Installation of the Software ................................................... 6
Check Prior to Installation ............................................................... 6
Installation of the Captureboard Soft .............................................. 6
Uninstallation of the Captureboard Soft .......................................... 9
Names and Functions of the Menu and
the Superimposed Image Display Screen ..................... 10
Menu ............................................................................................. 10
Superimposed Image Display Screen........................................... 11
Basic Operation .................................................................. 13
Adjustments and Settings ................................................... 17
Fine Adjustment of the Captured Image ....................................... 17
Making Settings ............................................................................ 18
Setup Utility ........................................................................ 19
3
Introduction
What is Captureboard Soft?
Using a TWAIN driver, the Software captures written and drawn data on the Captureboard as an image and
then superimposes it with the projection image of the projector on the personal computer, allowing it to be saved
as image data.
In addition, the positioning of the projection image of the projector and the read data of the Captureboard is
automatically and easily determined by a function that detects the projection position information of the projector
which is marked on the sheet surface of the Captureboard.
In this manual, the Captureboard Soft may at times be referred to as “this software”, and the Captureboard as
“this machine” or “the main unit”.
Notice
• This software is designed to store records of meetings. It may not reproduce and store accurate colors or image quality.
Also note that the capture data automatic positioning function is not something that guarantees an accurate positioning
operation.
• The operation of the Captureboard Soft supports only the C-11 Series.
ABCD
EFGH
xyz
ABCD
EFGH
xyz
ABCD
EFGH
xyz
Captureboard
Personal Computer
Projector
Store on a hard disk drive, etc.
Superimpose images
with this software
Notice
Supported OS: Microsoft Windows 2000 Professional (Service Pack 4 or higher) /
XP (Home Edition /Professional Edition Service Pack 2 or higher) /
Vista (32 bit version)
Supported PC: IBM PC/AT fully compatible computers that run the aforementioned OS
CPU: Pentium II or higher processor (A clock frequency of 1.2 GHz or higher is recommended)
Memory: Windows 2000 (128 MB or greater),
Windows XP (256 MB or greater),
Windows Vista (512 MB or greater)
Available hard
disk space: 40 MB or greater
Display resolution
: 800 x 600 pixels or greater
Peripheral devices
: CD-ROM drive, standard USB ports
Web browser: Internet Explorer 6.0 or higher
• All operations are not guaranteed in the aforementioned operating environment.
• Windows 95, 98SE/Me, NT, 2000 Server, Server 2003, and Vista (64 bit version) are not supported.
Operating Environment
Introduction
4
Copyright and License
◆ Copyright
PLUS Vision Corp. (hereafter called We) holds the copyright of this software and related works which are
protected by Japan's Copyright Law and international treaties.
Copyright (C) Since 2007 PLUS Vision Corp. All rights reserved.
◆ Disclaimer
We shall not be responsible in any way for direct or indirect damages that may arise from this software or
products derived from related software. We shall not be responsible in any way for damages as a result of the
machine or medium. Furthermore, We shall not be responsible in any way that may relate to the effects of the
results of using this software.
◆Terms of Use and Terms of Distribution
• We shall not be responsible in any way for any kind of damages arising from the use or inoperability of this
software.
• We shall not be liable in any way for support of this software, any kind of warranty, correction of trouble or
continuation of version upgrades, etc.
• Provided that you consent to the aforementioned matters, you shall be permitted to use the software for non-
profit purposes for personal use and use within a company.
• When “this software” is mentioned, it refers not only to the executable file, but to all of the component files
including Help and appended text.
◆ Support
We call support the provision of all kinds of information including answers to questions, requests, trouble
reports, and other matters, and the scope of our support shall be limited to the functions and operation of this
software.
Problems that arise in using this software cross many paths including those attributable to the personal
computer, the OS, other application software, and other peripheral devices. Accordingly, we only support
problems that are attributable to this software. Also, this software is subject to version upgrades without
prior notice due to the technical advancement of hardware and software. The customer can receive and use
upgraded versions of this software through a method determined by us. Note that version upgrades will be
limited to customers who consent to the aforementioned conditions of use.
* Upon downloading this software from the PLUS Vision Web site, or installing it from the CD-ROM, the
customer is deemed to have consented to each of the terms.
5
Equipment Connections
Use of this software requires a USB connection between this machine and the personal computer, and a RGB or
DVI connection between the personal computer and the projector.
Do not connect this machine to the personal computer before installing the software.
Notice
RGB Input
Monitor Output
USB
PRINTER PC
Personal Computer
Projector
USB cable supplied with the unit
Captureboard
To the RGB input
connector of the
projector
To the PC dedicated
USB port (Type B)
To the personal
computer USB port
(Type A)
To the RGB output
(Display) connector of
the personal computer
Note
This is a representative example of personal computer and projector connections. Please see the manuals of your
personal computer and projector for details.
6
Installation of the Software
Selecting Software Installation from the menu of the accompanying CD-ROM will install the Captureboard Soft,
TWAIN driver, USB driver, and Setup Utility.
Check Prior to Installation
Installation of the Captureboard Soft
1. Check whether your personal computer satisfies the operating environment. (See page 3)
2. Check that your personal computer is not currently connected to this machine via USB.
3. At the time of installation, install with Administrator rights (i.e., a user having administrator rights) for
Windows 2000, or with a Computer Administrator rights (account) for Windows XP/Vista.
4. Close all other applications that are running.
Insert the supplied CD-ROM into the
CD-ROM drive of the personal computer.
The menu screen will be displayed automatically.
If the menu screen is not displayed automatically, double click
CD-ROM icon and double click “autorun.exe”.
Click “Software Installation”.
The installer will start.
Follow the instructions of the installer and
start the installation.
The Captureboard Soft, the TWAIN driver, the USB driver, and
the Setup Utility will be installed at the same time.
* When using Windows Vista, each time the installer is started,
the User Account Control dialog box is displayed. Select
“Continue” and continue with the installation.
Note
7
Installation of the Software
Click “Finish”.
The “Installer Information Dialog Box” will be displayed.
Click “Yes (Y)” and restart the personal computer.
When this software is installed on the personal
computer for the first time, continue to make the
following connections and operations.
■ Associating the USB port of the Captureboard
The USB driver is installed on the personal computer by the installer; however, the association with the USB
port is not completed. To enable use of the Captureboard Soft, install it according to the following procedure
when connecting the Captureboard.
1. Press the ON/Standby button of the Captureboard to turn on the power.
2. Use a USB cable to connect the USB port of the personal computer with the PC dedicated
USB port of the Captureboard. (See Page 5)
The New Hardware Search Wizard will be displayed.
Install according to the New Hardware Search Wizard.
Preparation
Select “Install Software Automatically
(Recommended) (T)” and click “Next
(N)(when using Windows XP)”.
Start the installation of the USB driver.
Continue on next page
* Installation will be completed automatically with Windows
2000/Windows Vista.
* The Windows Security dialog box will be displayed with Windows
Vista.
Select “Install this driver software (I)”.
* When using Windows Vista, each time the installer is started, the
User Account Control dialog box is displayed.
Select “Continue” and continue with the installation.
Note
Installation of the Software
8
Click “Finish”.
This software can now be used.
Installation of the Software
9
Uninstallation of the Captureboard Soft
Selecting [Start] → [Control Panel] will display the Control Panel screen.
Check that your personal computer and the Captureboard are not currently connected by USB.
Double click “Add or Remove Programs or Applications (this will differ
depending on the OS)” to display the “Add or Remove Programs Properties”
screen.
Select PLUS Captureboard from among the list displayed and click [Change /
Remove] to display the Add or Remove wizard screen.
Selecting the [Remove] radio button of the wizard and clicking [Next] will start
the uninstallation.
Note
* “Add or Remove Programs” will be displayed for Windows XP/Vista.
* When using Windows Vista, each time the uninstaller is started, the User Account Control dialog box is displayed. Select
“Continue” and continue with the uninstallation.
* When using Windows Vista, a portion of the files that have been redirected to the Virtual Store folder will remain even when
uninstallation of the software has been performed. Delete these files manually.
The Virtual Store folder is located in C:\Users\XXXXXX\AppData\Local\VirtualStore\Program Files\.
(XXXXXX is the logon user name. Please note that usually the AppData folder is hidden. )
10
Names and Functions of the Menu and the Superimposed Image Display Screen
Menu
① Scan button
Displays the projection image superimposed screen.
Yes: Starts the capture of the image (projected by the projector) that is displayed on the personal computer screen, and
the hand drawn image of the sheet surface.
No: Starts the capture of only the hand written and drawn image of the sheet surface. There will not be superimposing
with the image projected by the projector.
(Close): Closes the projection image superimposed screen.
② Mark button
Switches the display of the positioning ○ marks of the projection image.
Each click switches between “Display” and “Hide”.
The default setting is “Display”.
③ Settings
Displays the settings screen.
Select image for projection: Selects the number of the monitor that is connected to the projector.
The default setting is “Display 1”. This software automatically searches for the number of connected monitors.
Select color for positioning: Selects the color of the ○ mark that detects the position of the projection image of the
projector.
Select from among No specific color selected, Red, Green, Blue, and Black. The default setting is “No specific color
selected”.
The setting contents will not be stored unless the screen is closed by clicking the [OK] button.
(Close): Closes the settings screen.
④ (Help)
Displays the operation description.
⑤ (Minimize)
Minimizes the menu screen and displays the icon on the task bar.
⑥ (Close)
Closes the program.
①
● Main Menu
②
④ ⑤ ⑥
③
Table des matières
