Totevision LCD-1513TS 15.1 Manuel utilisateur

TFT LCD COLOR MONITOR

User’s manual

ModelΚLCD-1513VB 15.1ϛ

ModelΚLCD-1513TS 15.1ϛ

1319 Dexter Avenue N.#020,

Seattle,WA 98109

TELΚ206/623-6000

FAXΚ206/623-6609

FCC Notice

This equipment has been tested and found to comply with the limits for FCC class B.

Trademarks

Trademarks are the rights of their respective owners.

We reserved the right to change the specification or the documentation without further notice. We also take no

responsibility for damage caused by improper use of this product. Warranty void if customer break the seal of the

enclosures.

Multilingual User’s ManualΚ

1.Introduction

Product Description …………………………

Package Contents………………………………

Product Features………………………………

Cleaning…………………………………………

2. Control Function

OSD Button ………………………………………

OSD Control………………………………………

3. Inputs Diagram

Inputs ……………………………………………

Setting Up ………………………………………

4. Display Angle ………………………………………

5. Product Specification ……………………………

6. Display Modes……………………………………………

7.Service Information…………………………………

8. Appendices………………………………………….

Page.2

Page.3

Page.4

Page.6

Page.10

Page.11

Page.13

Page.14

Page.15

Page.16

Page.17

Page.1

Introduction

Product Description

Congratulations on purchasing the next generation of LCD monitor display! This

state-of-the-art high brightness LCD monitor incorporates high quality display into a small light

weighted module. It has power-saving capabilities and emits no harmful X-ray radiation. You will

certainly enjoy the benefit of its features: high brightness for better visibility under any given

environment, expanded color domain for better quality images, and further viewing distance for

comfort and safety.

This LCD monitor incorporates 15” color active matrix thin-film-transistor (TFT) liquid

crystal display with ABT (Advanced Brightness Technology) that makes the screen much more

brighter in order to provide superior display performance, especially for movies and picture

display. Maximum resolution of XGA 1024 x 768 is ideal for displaying complex graphics and high

definition images. Other outstanding designs that enhance this LCD monitor’s performance are

Plug & Play compatibility, audio system, A/V input, and users friendly OSD (On Screen Display)

controls.

Package Contents

Included with your LCD monitor are following itemsΚ

z15” TFT LCD monitor

z15 pin D-sub signal cable

zAC power cable

zUser’s manual

zSound Card Cable

zAdaptor & AC Cord

Product Features

zHigh contrast color TFT LCD display support resolution up to XGA 1024 x 768.

zCompatible with IBM VGA, VESA, and Macintosh standards.

zImbedded audio system provides sound performance.

z2 AV-IN and S-video use.

Page.2

zAudio-1, Audio-2, and PC line in sound application.

zPower management system conforms to VESA DPMS standard.

zSupport DDC1/2B for Plug & Play compatibility.

zAdvanced OSD control for picture quality adjustment.

zDetachable stand for wall-mounting application.

Cleaning

zGently wipe screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth. This

removes dust and other particles that can scratch the screen.

zDo not apply pressure to the screen surface when wiping it clean.

zDo not pour or spray any liquid directly onto the screen or case of the LCD monitor.

Chemical cleaners have been reported to damage the screen or case of the LCD monitor.

Page.3

Control Function

Control Button Front View

1.Power SwitchΚPressing this button turns the display system power on or off.

2.EarphoneΚThis input would offer users another better choice in using a monitor without

disturbing others.

3.Power LEDΚThis Power LED indicates different status when this unit operates in different

modes.

Page.4

4.OSD Menu / SelectΚPressing this button pops up the OSD menus on the screen, and used to

select the OSD control options on the screen.

5.IncreaseΚThis button is used to adjust the increasing value of selected OSD control option.

6.DecreaseΚThis button is used to adjust the decreasing value of selected OSD control option.

Page.5

ˆˁˣ˸ʳ˟˘˗ʳ

˄ˁˣ˸ʳ˦˼˶˻

˅ˁ˘˴˻˸

ˈˁ˜˶˸˴˸

ˉˁ˗˸˶˸˴˸

ˇˁˢ˦˗ʳˠ˸ʳ˂ʳ˦˸˿˸˶

OSD

Monitor Function Selection MenuΚ

Auto AdjustΚSelect this function can make the monitor have best efficiencyΖ

BrightnessΚAdjust the brightness using Ѐand Ёbuttons.

ContrastΚAdjust the contrast using Ѐand Ёbuttons

ClockΚAdjust the clock using Ѐand Ёbuttons

PhaseΚAdjust the phase using Ѐand Ёbuttons

Horizontal PositionΚPressing Ѐmoves the display image to right; Pressing Ё

moves the display image to left

Vertical PositionΚPressing Ѐmoves the display image upward; Pressing Ё

moves the display image downward

Page.6

Tools MenuΚ

Input AV1: 1st Video-out connector of any image resource

Input AV2Κ2nd Video-out connector of any image resource

Input S-VideoΚS Video-out connector of any image resource

VolumeΚAdjust the volume using Ѐand Ёbuttons

MuteΚMute function.

ResetΚreset function.

Page.7

RGB Adjusting MenuΚ

RedΚRed Range

GreenΚGreen Range

BlueΚBlue Range

Page.8

OSD Function Selection MenuΚ

Exit OSDΚExit the OSD function selection menu.

OSD Horizontal PositionΚPressing Ѐmoves the OSD menu to right; Pressing Ё

moves the OSD menu to left

OSD Vertical PositionΚPressing Ѐmoves the OSD menu upward; Pressing Ё

moves the OSD menu downward

OSD Time OutΚSet the OSD time

Moiré AdjustΚSet panel moiré degrees and noise.

Page.9

Inputs Diagram

Inputs

μ1νμ2νμ3νμ4ν

μ5νμ6νμ7νμ8ν

μ1νAUDIO1ΚThis can be connected to the 1st audio-out connector of any sound resource.

μ2νAUDIO2ΚThis can be connected to the 2nd audio-out connector of any sound resource.

μ3νLINE INΚThis can be connected to the 3rd audio-out connector of any sound resource.

μ4νDC INΚThis is for connecting the power cable.

μ5νVIDEO1ΚThis can be connected to the 1st video-out connector of any video resource.

μ6νVIDEO2ΚThis can be connected to the 2nd video-out connector of any video resource.

μ7νS-VIDEOΚThis can be connected to the 3rd video-out connector of any video resource.

μ8νPC INΚThis can be connected with the D-Sub 15 pin signal connector.

Page.10

Precautions

zRead all of these instructions and save them for later use.

zFollow all warnings and instructions on the product.

Product

zDo not cover block the vent holes in the case.

zDo not insert sharp objects or spill liquid into the LCD monitor through cabinet slots. They

may cause accidents, fire, electric shock or failure.

zDisconnect the power plug from the AC outlet if you will not use it for an indefinite period.

zDo not attempt to service this product yourself, by opening or removing covers may expose

you to dangerous voltage points or other risks.

zDo not touch the screen directly with your fingers. You may damage the screen, and oil from

your skin in difficult to remove.

zDo not apply pressure to screen. The LCD is a very delicate product.

Power

zUse the type of power indicated on the marked label.

Plugs

zDo not remove any of the prongs of the monitor’s three-pronged power plug.

zDisconnect the power plug from the AC outlet under following conditionsΚ

zIf you will not use it for an indefinite period time.

zWhen the power cord or plug is damaged or frayed.

zIf the product does not operate properly, adjust only those controls that are mentioned in the

operating instructions. Improper adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to restore the product to normal

operation.

zIf the product has been dropped or the cabinet has been damaged.

zIf the product exhibits a distinct change in performance, indicating a need for service.

zPower and extension cords

zDo not allow anything to rest on the power cord.

Page.11

zDo not locate this product where persons will walk on the cord.

zUse the proper power cord with correct attachment plug type. If the power source is 120V

AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC

supply, use the tandem (T blade) type attachment plug with ground conductor power cord

that meets the respective European country’s safety regulations, such as VDE for

Germany.

zDo not overload wall outlets or power cords. Ensure that the total of all units plugged into

the wall outlet does not exceed 10 amperes.

zEnsure that the total ampere ratings on all units plugged into the extension cord is not

above the cord’s rating.

zIf the power supply cord, which came with your monitor, is to be connected to the PC

instead of the wall outlet, this equipment is to be used with UL/TÜV approved computers

with receptacle rated 100~240V AC, 50/60Hz, 1.0A(minimum).

Environment

zPlace the monitor on a flat and leveled surface.

zPlace the monitor in a will-ventilated place.

zKeep the monitor away from the following:

Do not place unit in extreme hot, cold or humid environment and do not place it directly

under sunlight, dusty surroundings, equipment that generate strong magnetic fields.

zPlease adjust the frequency to 75 Hz after setting up the LCD monitor.

zThen push the OSD menu button and use the Auto Adjust function to fine the best mode of

your computer.

Page.12

Display Angle

Tilting

For viewing clarity, you can tile the LCD forwardΰup to 3 degreesαor backward ΰup to

15 degreesα.

DownΚ3o

RightΚ40oLeftΚ40o

UpΚ15 o

Page.13

Product Specification

Type

Spec PC SPEAKER AV

LCD Display 15” active matrix TFT LCD panel

Pixel Pitch 0.297(H) x 0.297(V) mm

Max. Resolution 1024(H) x 768(V) XGA

Set Size 418(H) x 399(V) x 201(D) mm

Pack Size 480(H) x 450(V) x 230(D) mm

Contrast Ratio 150:1~400:1

Brightness 500 ~ 1000 cd/m2

Response Time 20~50ms

Display Color 16.777 M

View Angle L+/R- 60~80

U+/D- 50~60

Pc Interface RGB analog 0.7V peak to peak

Video Sync. TTL positive or negative

Display Mode VGA, SVGA, XGA

Audio-in None Phone jack RCA (x 2)

Video-in None None S & RCA (x2)

Signal Connector D-sub 15 pin

Front Control Power on/off with LED, OSD Menu, +/-Adjustment

OSD Contrast, Brightness, Auto Adjust, Clock, Phase, H-Position,

V-Position

Input: Pc / AV1 / AV2 / S-Video (AV)

Power Adapter AC Input: 100-240V~1.5A, 50-60Hz

DC Output: 12V / 5.0A

Operating Conditions Temperature: 0к~35к

Humidity: 20%~95%

Storage Conditions Temperature: -20к~60к

Humidity: 5%~95%

Certification FCC (DOC), CE-B, VCC-I, UL, TUV/GS

Weight Net WeightΚ4.66Kgs, Gross WeightΚ6.66Kgs

Page.14

Display Modes

Mode Resolution H Freq (kHz) V Freq (Hz)

1 640 x 350 31.469 70.087

2 640 x 400 24.823 56.416

3 640 x 400 31.469 70.087

4 640 x 480 31.469 59.940

5 640 x 480 35.000 66.667

6 640 x 480 37.861 72.809

7 640 x 480 37.500 75.000

8 720 x 400 31.469 70.087

9 800 x 600 35.156 56.250

10 800 x 600 37.879 60.317

11 800 x 600 48.077 72.188

12 800 x 600 46.875 75.000

13 832 x 624 49.107 75.087

14 1024 x 768 48.363 60.004

15 1024 x 768 56.476 70.069

16 1024 x 768 60.023 75.029

Page.15

Service Information

Service

Please review the warranty information located on the back of the Quick Start Guide or

contact your local authorized distributor/retailer.

Page.16

Appendices

Troubleshooting

If you are experiencing trouble with your LCD display, please refer to the following.

If the problem persists, please contact your local dealer or our service center.

Note: For best viewing image effect, please set resolution at 1024x768

Problem: No signal

Ensure all cables and power connections are correctly and securely connected.

Check the power LED light is in “green” color.

Make sure the computer is on.

Press the OSD “Auto Setup” for best view result.

Problem: Image is out of focus

Adjust “Phase” function inside the OSD until the image is focused.

Page.17

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Totevision Moniteur

Totevision

Totevision LCD-840VL Manuel utilisateur

Totevision

Totevision LCD-1510V Manuel utilisateur

Totevision

Totevision LCD-640 Manuel utilisateur

Totevision

Totevision LCD-703HD Manuel utilisateur

Totevision

Totevision LCD-4000HD Manuel utilisateur

Totevision

Totevision LCD-1700VRQ Manuel utilisateur

Totevision

Totevision LCD-1700VR Manuel utilisateur

Totevision

Totevision LCD-1042TS Manuel

Totevision

Totevision LCD-1042TS Manuel utilisateur

Totevision

Totevision LCD-1540HD Manuel utilisateur

Totevision

Totevision LCD-800L Manuel utilisateur

Totevision

Totevision LCD-642 Manuel utilisateur

Totevision

Totevision LCD-800 Manuel utilisateur

Totevision

Totevision LCD-1901HDL Manuel utilisateur

Totevision

Totevision LCD-1510V Manuel utilisateur

Totevision

Totevision LCD-1700VRZ Manuel utilisateur

Totevision

Totevision LCD-800D Manuel utilisateur

Totevision

Totevision LCD-801 Manuel utilisateur

Totevision

Totevision LCD-1048HDM Manuel utilisateur

Totevision

Totevision LCD-643 Manuel utilisateur

Totevision

Totevision LCD-1540HDL Manuel utilisateur

Totevision

Totevision LCD-1048HD Manuel utilisateur

Totevision

Totevision LCD-565 Manuel utilisateur

Totevision

Totevision LCD-2001VB Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation