TotalPond 52213 Manuel utilisateur
TotalPond
Item | Article | Artículo #52213, 52217, 52216, 52228
70-500 GPH
FOUNTAIN PUMPS
265-1893 LPH
POMPES POUR FONTAINE
265-1893 LPH BOMBAS DE FUENTE
#52217
#52213
#52228
#52216
1
English
TABLE OF CONTENTS
4-5 Warnings and Cautions
6Preparation
6Package Contents
7Operating Instructions
7-8 Specications / Pump Performance
9Product Registration
10-11 Maintenance & Troubleshooting
11-13 Replacement Parts / Limited Warranty
Française
TABLE DES MATIÈRES
14-15 Avertissements et mises en garde
16 Préparation
16 Contenu de l’emballage
17 Instructions d’utilisation
17-18 Spécications / Performances de la pompe
19 Enregistrement
20-21 Entretien et Dépannage
21-23 Pièces de rechange / Garantie limitée
2
TABLE OF CONTENTS
4-5 Warnings and Cautions
6Preparation
6Package Contents
7Operating Instructions
7-8 Specications / Pump Performance
9Product Registration
10-11 Maintenance & Troubleshooting
11-13 Replacement Parts / Limited Warranty
TABLE DES MATIÈRES
14-15 Avertissements et mises en garde
16 Préparation
16 Contenu de l’emballage
17 Instructions d’utilisation
17-18 Spécications / Performances de la pompe
19 Enregistrement
20-21 Entretien et Dépannage
21-23 Pièces de rechange / Garantie limitée
Español
TABLA DE CONTENIDO
24-25 Advertencias y precauciones
26 Preparación
26 Contenido del Paquete
27 Instrucciones de Funcionamiento
27-28 Especicaciones / Rendimiento de la Bomba
29 Registración del Producto
30-31 Mantenimiento y Solución de problemas
31-33 Piezas de repuesto / Garantía limitada
Visit WWW.TOTALPOND.COM for information and tips.
EN
4
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully prior to starting up the
unit!
The water system on which the operation of this product
is based requires utmost care and maintenance, possibly
also the use of chemicals, in order to prevent and keep
the occurrence of micro-organisms and harmful bacteria,
especially legionellae that are responsible for legionnaire’s
disease, under control. Non-observance of this information
about correct maintenance and care can entail the spreading
of harmful bacteria. Due to the fact that for decorative
purposes, water nozzles distribute water in the air, water
droplets containing harmful bacteria can enter your lungs and
cause life-threatening diseases.
It is the responsibility of the owner of the water system and
its attendant units to ensure their maintenance and care
in compliance with the laws, directives and instructions
laid down for this purpose. In order to avert harmful
contamination, we urgently recommend the user to ensure
cleaning and care of the water system and the water feature
including the nozzle, and to take all necessary measures
to maintain the technical units, such as pumps, tubing,
connectors, underwater lighting, and nozzles to keep them
in functional order in line with safety aspects. However, the
maintenance and care obligation is not limited to the technical
products supplied, but encompasses the entire system.
We also recommend the owner to keep records of the dates
when maintenance and care was carried out, and to document
WARNINGS AND CAUTIONS
Questions, problems, missing parts? Contact
Customer Care Monday - Friday
1-888-412-6001 customercare@totalpond.com
Thank you for choosing TotalPond®
EN
Please call Customer Care before returning item to store: 1-888-412-6001 5
all water tests made in conjunction with the water feature. The
owner is solely responsible for guaranteeing the safety of the
water feature. Use or maintenance of the units sold and the
system are beyond GeoGlobal Partner’s inuence. GeoGlobal
Partners can only be held liable for manufacturing faults of
TotalPond
®
units.
WARNING
• Risk of electrical shock. This pump is supplied with a
grounding conductor and grounding-type attachment
plug. To reduce the risk of electric shock, be certain that it
is connected only to a properly grounded, grounding-type
receptacle.
• Do not exceed the voltage shown on the pump.
• Always disconnect pump from the power source before
beginning any maintenance or work on the pump.
• Inspect cord for damage before installation and/or
maintenance. Replace the entire pump assembly if damage
is found.
• Do not remove the grounding pin from the power cord plug.
• To reduce the risk of electric shock, use only on portable,
self-contained fountains no larger than 5 ft. in any
dimension.
• Risk of electrical shock - This pump has not been
investigated for use in swimming pool or marine areas.
CAUTION
• This pump has been evaluated for use with fresh water only.
• Use a proper power source as indicated on the pump label.
• Keep the cord away from high temperatures or other heat
sources.
• Do not pump heated liquids.
• Do not let the pump run dry. Pump must be completely
submerged for proper operation and cooling.
• Operate in freshwater only. Avoid heavily chlorinated water
and water with high pH levels.
• Do not lift the pump by its power cord.
Visit WWW.TOTALPOND.COM for information and tips.
EN
6
PACKAGE CONTENTS
PREPARATION
Before beginning assembly or operation of product,
make sure all parts are present. Compare parts with
package contents list and diagram. If any part is missing or
damaged, do not attempt to assemble, install or operate
the product. Contact Customer Care for replacement parts.
• Estimated assembly time: 5 minutes.
• No tools required for assembly.
Part Description Qty
APump 1
B3/8 in. ID Tubing Adapter (52213, 52217) 1
C1/2 in. ID Tubing Adapter (52213, 52217, 52216) 1
D3/4 in. ID Tubing Adapter (52216) 1
E1/2 in. ID Tubing Adapter (52228) 1
F5/8 in. ID Tubing Adapter (52228) 1
G3/4 in. ID Tubing Adapter (52228) 1
A
CBD
G
EF
EN
Please call Customer Care before returning item to store: 1-888-412-6001 7
OPERATION INSTRUCTIONS
1
Step 1. Adjust the ow control
to the lowest setting. Once the
pump has been turned on (after
step 3) you may adjust the ow
control to the preferred setting.
Step 2. Connect tubing to the
outlet of the pump with the
appropriate adapter.
NOTE: Tubing not included.
Step 3. Place the pump into
the water and connect to a
properly grounded electrical
outlet.
2
3
Tubing
GFCI
outlet
SPECIFICATIONS
Pump #52213 #52217
Max Flow Rate 100 GPH (at 0 ft.) 150 GPH (at 0 ft.)
Max Pumping Height 2.8 ft. (at 0 GPH) 3.7 ft (at 0 GPH)
Ideal Pumping Height 1.5 ft. (at 65 GPH) 3 ft (at 45 GPH)
Power Consumption 5 watts / 0.06 amps 7 watts / 0.1 amps
Cord Length 6 ft. 6 ft.
Visit WWW.TOTALPOND.COM for information and tips.
EN
8
Flow Rates (GPH)
Lift (feet)
Ideal pumping range
7 90
6 174
5 102 259
4 148 311
3 45 190 359
2 40 79 253 422
174 115 296 475
0 100 150 338 533
52213 52217 52216 52228
Pumps
To measure ideal pumping
height, measure from the
waterline up.
Note: using excessive tubing
longer than the ideal pumping
height will result in reduced
water ow.
Pump #52216 #52228
Max Flow Rate 338 GPH (at 0 ft.) 533 GPH (at 0 ft.)
Max Pumping Height 6.2 ft. (at 0 GPH) 8 ft. (at 0 GPH)
Ideal Pumping Height 5 ft. (at 102 GPH) 7 ft. (at 90 GPH)
Power Consumption 23 watts / 0.4 amps 42 watts / 0.6 amps
Cord Length 16 ft. 16 ft.
SPECIFICATIONS (cont.)
EN
Please call Customer Care before returning item to store: 1-888-412-6001 9
Register your product online!
Use your smartphone camera
to scan the QR code or visit our
website totalpond.com/register
The 14 digit serial number located on the pump
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Date of purchase:
___ /___ /___
Item number:
______
Before installing your pump please write down the
following information:
00000000000000
Pump date code:
____ /____
mm yy
item number
Visit WWW.TOTALPOND.COM for information and tips.
EN
10
Step 1. Before cleaning,
always disconnect the
pump from the power
source and remove the
pump cover.
Step 2. Remove the
impeller cover to
expose the impeller
assembly. Remove the
impeller assembly by
gently pulling on the
impeller blades. The
impeller is held in place
by a magnet.
Step 3. Use a soft cloth or brush and warm water to clean
the impeller and the inside of the impeller housing.
Step 4. Reassemble all pump parts and place in water
before reconnecting to the power source.
Regular cleaning of the pump may be necessary depending
upon the environment which it is operated. Clean the pump
when it is visibly soiled or when a drop in performance is
detected.
1 2
3 4
MAINTENANCE & TROUBLESHOOTING
Always disconnect units from the power source
before beginning any maintenance or work on
the unit.
Autres manuels pour 52213
2
Ce manuel convient aux modèles suivants
3
Table des matières
Langues :
Autres manuels TotalPond Pompe de bassin
TotalPond
TotalPond DD11210 Manuel utilisateur
TotalPond
TotalPond 52299 Manuel utilisateur
TotalPond
TotalPond 52676 Manuel utilisateur
TotalPond
TotalPond 52676 Manuel utilisateur
TotalPond
TotalPond 52325 Manuel utilisateur
TotalPond
TotalPond 52323 Manuel utilisateur
TotalPond
TotalPond 52223 Manuel utilisateur
TotalPond
TotalPond 52323 Manuel utilisateur
Manuels Pompe de bassin populaires d'autres marques
TeichTip
TeichTip Sunsun Bio Pond Filter Set Manuel utilisateur
Hozelock Cyprio
Hozelock Cyprio Cascade 5500 Manuel utilisateur
Hozelock Cyprio
Hozelock Cyprio Aquaforce Series Manuel utilisateur
HEISSNER
HEISSNER SPF 150-00 Manuel utilisateur
AquaScape
AquaScape AQUAFORCE 4000-8000 Instructions d'utilisation
Messner
Messner system-X 1501 Manuel utilisateur