Fix Master Roller Arm and Pilot
Roller Plate with Wheel with the Pilot
Runner attachment screw.
⑭Cleaning
Be aware that direct contact with water, wiping the product with paint thinner or other
solvent, or cleaning it with chemicals could cause malfunction, discoloration or distortion.
If the product becomes dirty, clean it by wiping with a clean, soft dry cloth.
Disposal of packing materials
Do not leave packing materials at the installation site.
Separate combustible cardboard from noncombustible waste.
Observe the local waste separation regulations when disposing of the materials.
Pilot Roller Plate
M R Arm
Fixation Screw
Use a screwdriver to loosen the
screw of Stop, then remove the Stop.
⑮Stop
Insert Runners and secure the Stop
into place. (For Two way-draw, insert
the same number of Runners from
the Pulley at both ends.)
⑯
Noiseless
Roller
When securing the Stop into position, fit in such a way that the convex portion of the
Stop fits into the concave portion of the Pulley. Align carefully; an improper fit may
cause the Sto
