Toshiba Regza 42WLG66 Manuel utilisateur

SERVICE MANUAL

LCD Color Television

42WLG66 Ver. 1

This model is classified as a green product (*1), as indicated by the underlined serial number.

This Service Manual describes replacement parts for the green product. When repairing this

green product, use the part(s) described in this manual and lead-free solder (*2).

For (*1) and (*2), refer to GREEN PRODUCT PROCUREMENT and LEAD-FREE

SOLDER.

e 1 sur 1

26/06/10file://I:\42WLG66-01\html\!!fcover.html

IMPORTANT NOTICE

WARNING:

You are requested that you shall not modify or alter the information or data

provided herein without prior written consent by Toshiba. Toshiba shall not be

liable to anybody for any damages, losses, expenses or costs, if any, incurred

in connection with or as a result of such modification or alteration.

THE INFORMATION OR DATA HEREIN SHALL BE PROVIDED "AS IS" WITHOUT

ANY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED WARRANTY

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Toshiba shall not be liable for any damages, losses, expenses or costs, if any,

incurred in connection with or as a result of use of any information or data

provided herein.

e 1 sur 1

26/06/10file://I:\42WLG66-01\html\!!warnin

.html

GREEN PRODUCT PROCUREMENT

The EC is actively promoting the WEEE & RoHS Directives that define standards for recycling

and reuse of Waste Electrical and Electronic Equipment and for the Restriction of the use of

certain Hazardous Substances. From July 1, 2006, the RoHS Directive will prohibit any

marketing of new products containing the restricted substances.

Increasing attention is given to issues related to the global environmental. Toshiba Corporation

recognizes environmental protection as a key management tasks, and is doing its utmost to

enhance and improve the quality and scope of its environmental activities. In line with this,

Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts

and materials that have low environmental impacts.

Green procurement of parts is not only confined to manufacture. The same green parts used in

manufacture must also be used as replacement parts.

e 1 sur 1

26/06/10file://I:\42WLG66-01\html\!!

reen.html

LEAD-FREE SOLDER

This product is manufactured using lead-free solder as a part of a movement within the consumer

products industry at large to be environmentally responsible. Lead-free solder must be used in

the servicing and repair of this product.

The melting temperature of lead-free solder is higher than that of leaded solder by 86ºF to 104ºF

(30ºC to 40ºC). Use of a soldering iron designed for lead-based solders to repair product made

with lead-free solder may result in damage to the component and or PCB being soldered. Great

care should be made to ensure high-quality soldering when servicing this product especially

when soldering large components, through-hole pins, and on PCBs as the level of heat required

to melt lead-free solder is high.

WARNING: This product is manufactured using lead free solder.

DO NOT USE LEAD BASED SOLDER TO REPAIR THIS PRODUCT!

e 1 sur 1

26/06/10file://I:\42WLG66-01\html\!!l-f

solder.html

SAFETY INSTRUCTION

Safety Precaution

1. An isolation transformer should be connected in the power line between the receiver and

the AC line before any service is performed on the receiver.

2. Always disconnect the power plug before any disassembling of the product. It may result

in electrical shock.

3. When replacing a chassis in the cabinet, always be certain that all the protective devices

are put back in place, such as nonmetallic control knobs, insulating covers, shields,

isolation resistor-capacitor network, etc.

4. Always keep tools, components of the product, etc away from the children, These items

may cause injury to children.

5. Depending on the model, use an isolation transformer or wear suitable gloves when

servicing with the power on, and disconnect the power plug to avoid electrical shock when

replacing parts. In some cases, alternating current is also impressed in the chassis, so

electrical shock is possible if the chassis is contacted with the power on.

6. Always use the replacement parts specified for the particular model when making repairs.

The parts used in products require special safety characteristics such as inflammability,

WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY

PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW.

WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE

UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE

FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED

BEFORE SERVICING THIS CHASSIS.

e 1 sur 4SAFETY INSTRUCTION [LCD] ASIA, EU

26/06/10file://I:\42WLG66-01\html\!safe[lcd]asia

eu.html

voltage resistance, etc. therefore, use only replacement parts that have these same

characteristics. Use only the specified parts when the mark is indicated in the circuit

diagram or parts list.

7. Parts mounting and routing dressing of wirings should be the same as that used originally.

For safety purposes, insulating materials such as isolation tube or tape are sometimes used

and printed circuit boards are sometimes mounted floating. Also make sure that wirings is

routed and clamped to avoid parts that generate heat and which use high voltage. Always

follow the manufactured wiring routes / dressings.

8. Always ensure that all internal wirings are in accordance before re-assembling the external

casing after a repairing completed. Do not allow internal wiring to be pinched by cabinets,

panels, etc. Any error in reassembly or wiring can result in electrical leakage, flame, etc.,

and may be hazardous.

9. NEVER remodel the product in any way. Remodeling can result in improper operation,

malfunction, or electrical leakage and flame, which may be hazardous.

10. Touch current check. (After completing the work, measure touch current to prevent an

electric shock.)

zPlug the AC cord directly into the AC outlet. Do NOT use an isolation transformer for

this check.

zConnect a measuring network for touch currents between each exposed metallic part on

the set and a good earth ground such as a water pipe.

Annex D

(normative)

Measuring network for TOUCH CURRENTS

e 2 sur 4SAFETY INSTRUCTION [LCD] ASIA, EU

26/06/10file://I:\42WLG66-01\html\!safe[lcd]asia

eu.html

zThe potential at any point (TOUCH CURRENT) expressed as voltage and does

not exceed the following value:

Resistance values in orms (Ω).

Input resistance : 1 MΩ

Input capacitance : 200 pF

Frequency range : 15 Hz to 1 MHz and d.c. respectively

Note: Appropriate measures should be taken to obtain the correct value in case of non

sinusoidal waveforms.

The measuring instrument is calibrated by comparing the frequency factor of with the solid

line in figure F.2 of IEC 60990 at various frequencies. A calibration curve is constructed

showing the deviation of from the ideal curve as a function of frequency.

TOUCH CURRENT = /500 (peak value).

V: Voltmeter or oscilloscope

(r.m.s. or peak reading)

The part or contact of a TERMINAL is not HAZARDOUS LIVE if:

Note: The limit values of = 0.35 V (peak) for a.c. and = 1.0 V for d.c. correspond to the

values 0.7 mA (peak) a.c. and 2.0 mA d.c.

a) The open-circuit voltage should not exceed 35 V (peak) a.c. or 60 V d.c. or, if a) is not met.

b) The measurement of the TOUCH CURRENT shall be carried out in accordance with IEC

60990, with the measuring network described in Annex D of this standard.

The TOUCH CURRENT expressed as voltages and , does not exceed the following

values:

- for a.c. : = 35 V (peak) and = 0.35 V (peak);

- for d.c. : = 1.0 V

e 3 sur 4SAFETY INSTRUCTION [LCD] ASIA, EU

26/06/10file://I:\42WLG66-01\html\!safe[lcd]asia

eu.html

Product Safety Notice

Many electrical and mechanical parts in this chassis have special safety-related characteristics.

These characteristics are often passed unnoticed by a visual inspection and the protection

afforded by them cannot necessarily be obtained by using replacement components rated for

higher voltage, wattage, etc. Replacement parts which have these special safety characteristics

are identified in this manual and its supplements; electrical components having such features are

identified by the international hazard symbols on the schematic diagram and the parts list.

Before replacing any of these components, read the parts list in this manual carefully. The use of

substitute replacement parts which do not have the same safety characteristics as specified in the

parts list may create electrical shock, fire, or other hazards.

e 4 sur 4SAFETY INSTRUCTION [LCD] ASIA, EU

26/06/10file://I:\42WLG66-01\html\!safe[lcd]asia

eu.html

SAFETY INSTRUCTION

Handling the LCD Module

Safety Precaution

In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or

drink this fluid.

Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid

should enter the mouth, rinse the mouth thoroughly with water. If the fluid should contact the

skin or clothing, wipe off with alcohol, etc., and rinse thoroughly with water. If the fluid should

enter the eyes, immediately rinse the eyes thoroughly with running water.

Precautions for Handling the LCD Module

The LCD module can easily be damaged during disassembly or reassembly; therefore, always

observe the following precautions when handling the module.

1. When attaching the LCD module to the LCD cover, position it appropriately and fasten at

the position where the display can be viewed most conveniently.

2. Carefully align the holes at all four corners of the LCD module with the corresponding

holes in the LCD cover and fasten with screws. Do not strongly push on the module

because any impact can adversely affect the performance. Also use caution when handling

the polarized screen because it can easily be damaged.

CAUTION: The metal edges of the LCD module are sharp, handle it with care.

e 1 sur 4Handlin

the LCD Module

26/06/10file://I:\42WLG66-01\html\!handlin

lcd.html

3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not

remove the soiling, breathe on the surface and then wipe again.

If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the panel

surface by drop the cleaner on the cloth. Do not drop the cleaner on the panel. Pay

attention not to scratch the panel surface.

4. Leaving water or other fluids on the panel screen for an extended period of time can result

in discoloration or stripes. Immediately remove any type of fluid from the screen.

5. Glass is used in the panel, so do not drop or strike with hard objects. Such actions can

damage the panel.

e 2 sur 4Handlin

the LCD Module

26/06/10file://I:\42WLG66-01\html\!handlin

lcd.html

Table des matières

Autres manuels Toshiba Téléviseur LCD

Toshiba

Toshiba L2436DB Manuel utilisateur

Toshiba

Toshiba 52HL167 - 52" LCD TV Manuel utilisateur

Toshiba

Toshiba 50L2333D Manuel utilisateur

Toshiba

Toshiba 40WL768 Manuel utilisateur

Toshiba

Toshiba 37RV525RZ Manuel utilisateur

Toshiba

Toshiba 19C100U Manuel utilisateur

Toshiba

Toshiba Regza 42LX196 Manuel utilisateur

Toshiba

Toshiba 32WLT58 Series Manuel utilisateur

Toshiba

Toshiba 42HL196 - 42" LCD TV Manuel utilisateur

Toshiba

Toshiba Regza 55ZV650U Manuel utilisateur

Toshiba

Toshiba 26HL84 Manuel utilisateur

Toshiba

Toshiba C/X3000P Series Manuel d'utilisation et d'entretien

Toshiba

Toshiba 40L1534DG Guide de configuration

Toshiba

Toshiba REGZA 26LV67 Manuel utilisateur

Toshiba

Toshiba L243 D Manuel utilisateur

Toshiba

Toshiba 32AV502U - 31.5" LCD TV Manuel utilisateur

Toshiba

Toshiba 32HLC56 - 32" LCD Flat Panel Display Manuel utilisateur

Toshiba

Toshiba REGZA 26HL67 Manuel utilisateur

Toshiba

Toshiba 19DV550P Manuel utilisateur

Toshiba

Toshiba 37C3000P Manuel utilisateur

Toshiba

Toshiba 32YT56 Manuel utilisateur

Toshiba

Toshiba 20DL75 Manuel utilisateur

Toshiba

Toshiba 55HT1U Manuel utilisateur

Toshiba

Toshiba 47WL68A Manuel utilisateur

Manuels Téléviseur LCD populaires d'autres marques

LG 32LC4R* Manuel utilisateur

ViewSonic

ViewSonic N4200w-1 VS10945-1M Manuel utilisateur

Salora

Salora 22LED1600 Manuel utilisateur

Samsung

Samsung LA32E420 Mode d’emploi

Dell

Dell W1900 19 Instructions d'utilisation

Samsung

Samsung LN40C670M1F Manuel utilisateur

Samsung

Samsung Series 4+ Manuel utilisateur

Samsung

Samsung 5 Series Manuel utilisateur

Grundig

Grundig 40 VLE 8230 BP Manuel utilisateur

Philips

Philips 43PFL4901/F7 Manuel utilisateur

Sony

Sony Bravia XBR-43X830C Manuel utilisateur

LG 32LS350 Manuel utilisateur

VIORE

VIORE LED32VF60 Manuel utilisateur

JVC

JVC LT-32A220 Manuel utilisateur

Philips

Philips 20TA1000/93 Manuel utilisateur

Philips

Philips 32PFL3158T/12 Manuel utilisateur

Sony

Sony Bravia KDL-V32XBR2 Manuel utilisateur

Vizio

Vizio VP422HDTV10A - 42" Plasma TV Manuel utilisateur