Toro 75750TA Manuel utilisateur

Form No. 3466-168 Rev A

T imeCutter

5000 or MX 5000

Riding Mower

Model No. 75750 —Serial No. 412660000 and Up

Model No. 75750T A —Serial No. 400000000 and Up

Model No. 75750W —Serial No. 41 1900000 and Up

Model No. 75759 —Serial No. 407800000 and Up

Original Instructions (EN)

*3466-168*

It is a violation of California Public Resource Code

Section 4442 or 4443 to use or operate the engine on

any forest-covered, brush-covered, or grass-covered

land unless the engine is equipped with a spark

arrester , as dened in Section 4442, maintained in

ef fective working order or the engine is constructed,

equipped, and maintained for the prevention of re.

Gross or Net T orque: The gross or net torque

of this engine was laboratory rated by the engine

manufacturer in accordance with the Society of

Automotive Engineers (SAE) J1940 or J2723. As

congured to meet safety , emission, and operating

requirements, the actual engine torque on this class

of mower will be signicantly lower . Please refer to

the engine manufacturer ’ s information included with

the machine.

The enclosed engine owner's manual is supplied

for information regarding the US Environmental

Protection Agency (EP A) and the California Emission

Control Regulation of emission systems, maintenance,

and warranty . Replacements may be ordered through

the engine manufacturer .

W ARNING

CALIFORNIA

Proposition 65 W arning

The engine exhaust from this product

contains chemicals known to the State of

California to cause cancer , birth defects,

or other reproductive harm.

Battery posts, terminals, and related

accessories contain lead and lead

compounds, chemicals known to

the State of California to cause

cancer and reproductive harm. W ash

hands after handling.

Use of this product may cause exposure

to chemicals known to the State of

California to cause cancer , birth defects,

or other reproductive harm.

Introduction

This rotary-blade, riding lawn mower is intended to be

used by homeowners in residential applications. It is

designed primarily for cutting grass on well-maintained

lawns. Using this product for purposes other than

its intended use could prove dangerous to you and

bystanders.

Read this information carefully to learn how to operate

and maintain your product properly and to avoid

injury and product damage. Y ou are responsible for

operating the product properly and safely .

V isit www .T oro.com for product safety and operation

training materials, accessory information, help nding

a dealer , or to register your product.

Whenever you need service, genuine T oro parts, or

additional information, contact an Authorized Service

Dealer or T oro Customer Service and have the model

and serial numbers of your product ready . Figure 1

identies the location of the model and serial numbers

on the product. W rite the numbers in the space

provided.

Important: W ith your mobile device, you can

scan the QR code on the serial number decal (if

equipped) to access warranty , parts, and other

product information.

g297763

Figure 1

Behind the seat

1. Model and serial number location

W rite the product model and serial numbers in the

space below:

Model No.

Serial No.

This manual uses 2 words to highlight information.

Important calls attention to special mechanical

information and Note emphasizes general information

worthy of special attention.

The safety-alert symbol ( Figure 2 ) appears both in

this manual and on the machine to identify important

safety messages that you must follow to avoid

accidents. This symbol will appear with the word

Danger ,W arning , or Caution .

81 1 1 L yndale A venue South

Bloomington, MN 55420

Printed in the USA

•Danger indicates an imminently hazardous

situation which, if not avoided, will result in death

or serious injury .

•W arning indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injury .

•Caution indicates a potentially hazardous situation

which, if not avoided, may result in minor or

moderate injury .

sa-black

Figure 2

1. Safety-alert symbol

Contents

Safety ....................................................................... 4

General Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Slope Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Safety and Instructional Decals . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Attachments/Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Before Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Before Operation Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Performing Daily Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Breaking in a New Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using the Safety-Interlock System . . . . . . . . . . . . . . . . . . . . 16

Positioning the Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Adjusting the MyRide® Suspension

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Adjusting the Motion-Control Levers . . . . . . . . . . . . . . . . . 18

During Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

During Operation Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Operating the Mower Blade-Control Switch

(PT O) ............................................................ 20

Operating the Throttle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Operating the Choke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Starting the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Shutting Of f the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Using the Motion-Control Levers . . . . . . . . . . . . . . . . . . . . . . . 22

Driving the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Using the Smart Speed

T M

Control

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using the Side Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Adjusting the Height of Cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Adjusting the Anti-Scalp Rollers . . . . . . . . . . . . . . . . . . . . . . . . 25

Operating T ips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

After Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

After Operation Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Cleaning the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Pushing the Machine by Hand . . . . . . . . . . . . . . . . . . . . . . . . . . 26

T ransporting the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Maintenance Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Recommended Maintenance Schedule(s) . . . . . . . . . . . 29

Pre-Maintenance Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Raising the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Greasing the Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Engine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Engine Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Servicing the Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Servicing the Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Servicing the Spark Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Cleaning the Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Fuel System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Replacing the In-Line Fuel Filter . . . . . . . . . . . . . . . . . . . . . . . 35

Electrical System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Electrical System Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Servicing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Servicing the Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Drive System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Checking the T ire Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Releasing the Electric Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Adjusting the T racking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Belt Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Inspecting the Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Replacing the Mower Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Mower Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Blade Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Servicing the Cutting Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Leveling the Mower Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Removing the Mower Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Installing the Mower Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Replacing the Grass Deector . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

W ashing the Underside of the Mower

Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Disposing of W aste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Storage Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Cleaning and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Storing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

T roubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Safety

General Safety

This product is capable of amputating hands and

feet and of throwing objects. Always follow all safety

instructions to avoid serious personal injury or death.

•Read and understand the contents of this

Operator ’ s Manual before starting the engine.

•Keep bystanders and children away .

•Do not allow children or untrained people to

operate or service the machine. Allow only people

who are responsible, trained, familiar with the

instructions, and physically capable to operate or

service the machine.

•Do not operate the machine near drop-of fs,

ditches, embankments, water , or other hazards, or

on slopes greater than 15°.

•Do not put your hands or feet near moving

components of the machine.

•Do not operate the machine without all guards,

safety switches, and other safety protective

devices in place and functioning properly .

•Shut of f the engine, remove the key , and wait

for all moving parts to stop before leaving the

operator ’ s position. Allow the machine to cool

before servicing, adjusting, fueling, cleaning, or

storing it.

Slope Indicator

g01 1841

Figure 3

Y ou may copy this page for personal use.

1. The maximum slope you can operate the machine on is 15 degrees . Use the slope chart to determine the degree of slope of

hills before operating. Do not operate this machine on a slope greater than 15 degrees. Fold along the appropriate line

to match the recommended slope.

2. Align this edge with a vertical surface, a tree, building, fence pole, etc.

3. Example of how to compare slope with folded edge

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area

of potential danger . Replace any decal that is damaged or missing.

decalbatterysymbols

Battery Symbols

Some or all of these symbols are on your battery .

1. Explosion hazard 6. Keep bystanders away

from the battery .

2. No re, open ame, or

smoking

7. W ear eye protection;

explosive gases can

cause blindness and other

injuries.

3. Caustic liquid/chemical

burn hazard

8. Battery acid can cause

blindness or severe burns.

4. W ear eye protection. 9. Flush eyes immediately

with water and get medical

help fast.

5. Read the Operator's

Manual .

10. Contains lead; do not

discard

decaloemmarkt

Manufacturer's Mark

1. This mark indicates that the blade is identied as a part

from the original machine manufacturer .

decal99-3943

99-3943

1. Belt routing

2. Engine

decal1 12-9840

1 12-9840

1. Read the Operator's

Manual .

3. Remove the ignition key

and read the instructions

before servicing or

performing maintenance.

2. Height of cut

decal121-2989b

121-2989

1. Bypass lever position for

pushing the machine

2. Bypass lever position for

operating the machine

decal130-0731

130-0731

1. W arning—thrown object

hazard; keep the deector

shield in place.

2. Cutting hazard of hand or

foot, mower blade—keep

away from moving parts.

decal132-0872

132-0872

1. Thrown object

hazard—keep bystanders

away from the machine.

3. Severing hazard of hand

or foot—keep away from

moving parts.

2. Thrown object hazard,

raised deector—do not

operate the machine with

an open deck; use a

bagger or a deector .

4. Entanglement

hazard—keep away

from moving parts; keep

all guards and shields in

place.

Decal 138-6074 is molded into the fuel tank.

decal138-2456

138-6074

1. Read the Operator ’ s

Manual .

3. Do not overll the fuel

tank.

2. Park the machine on a

level surface when lling

the fuel tank.

decal139-2388

139-2388

1. Slow

3. Fast

2. Hauling

Decal 139-2391 is for machines without an hour meter .

decal139-2391

139-2391

1. Fast

2. Slow

decal139-2392

139-2392

decal139-2394

139-2394

1. T raction controls 4. Neutral

2. Fast 5. Reverse

3. Slow

6. Parking brake

decal139-2395

139-2395

1. Parking brake 4. Neutral

2. Fast 5. Reverse

3. Slow

6. T raction controls

Decal 139-2397 is for models with MyRide only .

decal139-2397

139-2397

Decal 140-2717 is for models with an hour meter only .

decal140-2717

140-2717

1. Fast

2. Slow

decal142-5864

142-5864

Decal 144-5288 is for models without MyRide only .

decal144-5288

144-5288

Note: This machine complies with the industry standard

stability test in the static lateral and longitudinal tests with the

maximum recommended slope indicated on the decal. Review the

instructions for operating the machine on slopes in the Operator ’ s

Manual as well as the conditions in which you would operate the

machine to determine whether you can operate the machine in the

conditions on that day and at that site. Changes in the terrain can

result in a change in slope operation for the machine.

1. W arning—read the

Operator ’ s Manual .

4. Runover hazard—do not

carry passengers; look

behind you when moving

in reverse.

2. Cutting/dismemberment

hazard of the ngers or

hand—keep hands away

from moving parts; keep

all guards and shields in

place.

5. T ipping hazard—when

loading onto a trailer , do

not use dual ramps; only

use a singular ramp wide

enough for the machine;

do not use a ramp with

a slope greater than 15°;

back up the ramp (in

reverse) and drive forward

of f the ramp.

3. Thrown object

hazard—keep bystanders

away; pick up any debris;

keep the deector in place.

6. T ipping hazard—do not

use the machine near

drop-of fs or on slopes

greater than 15°; only

operate across slopes less

than 15°.

Decal 132-0869 is for models with MyRide only .

decal132-0869

132-0869

Note: This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum

recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator ’ s Manual as

well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions on

that day and at that site. Changes in the terrain can result in a change in slope operation for the machine.

1. W arning—read the

Operator's Manual .

3. Cutting/dismemberment

hazard of the hand, mower

blade; entanglement

hazard of the hand,

belt—stay away from

moving parts; keep all

guards and shields in place.

5. T ipping hazard—do not

use dual ramps when

loading onto a trailer; use

1 ramp wide enough for

the machine; use a ramp

with a slope less than 15°;

back up the ramp when

loading the machine and

drive forward of f the ramp

when unloading.

7. T ipping hazard—do not use

the machine near drop-of fs

or on slopes greater than

15°; only operate across

slopes less than 15°.

2. W arning—read the

Operator's Manual before

performing maintenance;

engage the parking brake,

remove the key , and

disconnect the spark plug.

4. Thrown object

hazard—keep bystanders

away; pick up debris

before operating; keep the

deector in place.

6. Runover hazard—do not

carry passengers; look

behind you when mowing

in reverse.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Toro Tondeuse à gazon

Toro

Toro 22155 Manuel utilisateur

Toro

Toro Emotion 43 Series Manuel utilisateur

Toro

Toro 74268 Manuel utilisateur

Toro

Toro REELMASTER 6500 D Manuel utilisateur

Toro

Toro TimeCutter MX 4275T Manuel utilisateur

Toro

Toro REELMASTER 6500 D Manuel utilisateur

Toro

Toro TimeMaster 20199 Manuel utilisateur

Toro

Toro Greensmaster 3150 Manuel utilisateur

Toro

Toro 22200TE Manuel utilisateur

Toro

Toro Wheel Horse 71197 Manuel

Toro

Toro Z Master Professional 5000 Series Manuel utilisateur

Toro

Toro 20997 Manuel utilisateur

Toro

Toro Groundsmaster 7210 Series Manuel utilisateur

Toro

Toro CT2120 30655 Manuel utilisateur

Toro

Toro Groundsmaster 360 ROPS Cab Manuel utilisateur

Toro

Toro Greensmaster 3320 TriFlex Manuel utilisateur

Toro

Toro Groundsmaster 223D Manuel utilisateur

Toro

Toro Super Recycler 20381 Manuel utilisateur

Toro

Toro Recycler 20070 Manuel utilisateur

Toro

Toro 31236 Manuel utilisateur

Toro

Toro LX423 Manuel utilisateur

Toro

Toro 30659 LT-F3000 Manuel utilisateur

Toro

Toro 74741 Manuel utilisateur

Toro

Toro 74959 Manuel utilisateur

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

Craftsman

Craftsman 917.378461 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Stihl

Stihl RMA 443 PV Manuel utilisateur

Yard-Man

Yard-Man 3700-0 Manuel utilisateur